The heated Freedom H2O motorcycle glove features a sleek and elegant design with a fine grip feel, and of course, our THERMOTRONIC high-tech system. The THERMOTRONIC has four different heat levels (from low to high) that can be easily adjusted using the large button on the top of the glove. Thanks to the colored ring around the button, it is very easy to see which heat level is currently active. The exterior of the glove is made from flexible softshell material on the top and grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation, providing an immediate sense of comfort and protection against the cold. The use of a soft knuckle shell makes the gloves very comfortable to wear while still providing plenty of safety. The hydratex|Z-Liner construction guarantees 100% waterproofing. Additionally, there are reflective strips on the back of the hand to increase your visibility without disturbing the clean and fresh look of the glove. Not to forget the conductive fingertip, which allows you to operate touchscreens without having to take off the glove—a significant advantage in cold weather. The Freedom H2O motorcycle glove takes the fear out of winter.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.LiningTri-Fleece LiningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away to keep hands dry.High-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: the structure of high-pile fibers traps more air than regular fibers, providing natural insulation that retains warmth.InsulationExkin® Platinum® Insulation MaterialThermal InsulationFixed REV'IT! Thermotronic Heating SystemIntegrated 7.4V heating system with adjustable heat levels.ClosureWrist StrapElastic Drawstring at the CuffElastic drawstring for adjusting the glove cuff.Adjustment OptionsStretch Fabric on the FingersAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.ProtectionPWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderViscoelastic KnuckleThese knuckle protectors are made from viscoelastic rubber. They protect your finger knuckles from impacts while ensuring freedom of movement for the hand.FeaturesVisor WiperLong CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Battery Set for REV'IT! Thermotronic Heating TechnologySet with two 7.4V batteries and micro-USB cable.Outer FabricSoftshell 3LConductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface, creating a water-absorbent fabric structure.Twill StretchDrum-dyed Water-Repellent Goat LeatherTaslanVisibilityLaminated Reflector on the Back of the HandLaminated Reflector on the Finger

The Continent WB Jacket is an adventure-ready high-tech jacket from our DIRT Series that offers much more than meets the eye at first glance. It has been designed with serious adventure tours in mind and adapts to changing conditions. When the going gets tough The Continent WB has been designed and certified to be ready for action immediately. The SEESMART protection ensures that your elbows and shoulders are protected from injuries, and there is a pocket for a SEESOFT back protector. However, it is also possible to remove the standard protectors and wear the Continent WB jacket over our Proteus protector jacket with CE Level 1 and 2 certified impact absorbers when the going gets tough. Functional beyond looks and feel The elastic softshell construction not only looks functional but feels that way too – especially when the sleeves have been removed for even more freedom of movement and ventilation. Since the Continent WB is a transitional jacket, the sleeves can be removed at the shoulders, allowing it to quickly transform from a jacket for moderate temperatures into a fully-fledged, warming off-road vest.FeaturesInsulationWindBarrier®The REV’IT! WindBarrier® membrane is laminated between two different fabric layers: an elastic outer layer and a soft fleece inner layer. This combination blocks wind and helps repel water. Stopping wind and rain means preventing hypothermia and increasing the comfort and warmth level of the rider.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.VentilationPerforation on the upper frontVisibilityLaminated reflective material on the upper armsReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Reflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Laminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.PocketsTwo front pocketsInner pocketBack pocketA slit pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.Adjustment optionsAdjustable tab at the cuffsDrawstring for waist adjustmentFitActive fitActive Fit means full freedom of movement while minimizing material that could restrict mobility. It is intelligently tailored and adapts to the body where needed. At the same time, it allows unrestricted mobility during activity-oriented movements.Outer fabricSoftshell 3LCORDURA® 750D RipstopCORDURA® with ripstop properties.FeaturesElastic key cord in the pocketAn integrated elastic cord in the pocket secures your keys and makes them quickly accessible.Removable sleevesRemovable sleeves for more freedom of movement and additional cooling for the arms.SustainabilityOuter shell made with recycled polyester

Ob du in den Bergen unterwegs bist oder dich durch den Stadtverkehr quälst, irgendwann wirst du sicher mit Regen konfrontiert. Diese hochwertigen GORE-TEX Überhose ist wasserdicht und atmungsaktiv wie keine andere und gibt dir alles, was du brauchst, damit deine Beine sich wohlfühlen und 100 Prozent trocken bleiben. Die Alpinus GTX ist leicht, weist Regen und Wind ab und nimmt praktisch kein Wasser auf. So kann auch ein gelegentlicher Regenschauer deinen Tag nicht trüben. Zeit für einen Wechsel? Machen wir es nicht zu kompliziert mit der Überhose. Schlägt das Wetter um, während du unterwegs bist, muss es schnell gehen. Dank großzügig bemessener, leicht zu öffnender Reißverschlüsse kannst du deine Stiefel anbehalten. Hast du die Hose angezogen, stellst du an Hüfte und Knöcheln die gewünschte Passform ein. Das 3L 400 Denier GORE-TEX Material sorgt im Handumdrehen für abriebfesten, wasserdichten, winddichten und atmungsaktiven Komfort. Praktischer Schutz Das Fahren bei nassen Bedingungen birgt verschiedene Risiken. Diese Überhose liefert dir deshalb den notwendigen Schutz durch CE-zertifizierte SEEFLEX Protektoren für die Knie und SEESMART an der Hüfte, ohne dick aufzutragen. Das Sure-Grip-Panel am Po verhindert, dass du auf der Sitzbank verrutschst. In der wasserdichten Cargotasche am rechten Oberschenkel verstaust du wichtige Dinge wie Smartphone und Schlüssel sicher und griffbereit.FeaturesProtectionSEEFLEX CE-Level 2 Knee ProtectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEESMART CE-Level 1 Hip ProtectorsSEESMART hip protectors provide maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityLaminated Reflective Material on the CalvesReflective panels ensure excellent visibility, allowing the wearer to be seen from all directions. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Waterproofing3L GORE-TEX FabricAdjustabilityAdjustable Straps at the WaistAdjustable Tab at the AnklePocketsWaterproof Storage Pocket on the ThighFitRegular FitRegular Fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesPrepared for Suspender StrapperLong Connection ZipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short Connection ZipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.B-Lock Button Closure at the FrontOverpantsProtective, waterproof overpants that the rider wears over regular pants or motorcycle jeans.Inner Leg Zipper for Easy EntryAdditional zipper on the inner leg for easy access.Easy Access Protector PocketSpecially designed pocket for easy installation and removal of protectors.Anti-Slip Material on the SeatOuter Fabric3L GORE-TEX Nylon 400D FabricGORE-TEX clothing is designed for motorcycling under extreme conditions. The fabric consists of robust, high-strength 400 Denier nylon, ensuring high abrasion and tear resistance. A GORE-TEX high-performance membrane is located between this stable outer shell and the lining. The greatest advantage of this three-layer construction: The outer shell absorbs virtually no water, and breathability works unrestricted in all weather conditions.PWR|Shell StretchNULLLiningSoft Mesh Spacer FabricMesh intermediate lining that ensures comfort and fit.

We present the Andon Hoodie. A casual, sporty aesthetic piece of clothing that seamlessly fits into everyday life on and off the motorcycle. Changing was yesterday. The name of the game Comfort is key with the Andon Hoodie. This is achieved through its outer material made of polyester stretch and the mesh lining. Thanks to unrestricted freedom of movement, you feel free to enjoy the moment. The included SEESMART elbow and shoulder protectors, along with the CE classification AA, give you a sense of security. Stay casual The Andon is one of the casual models in our collection, inspired by the sportswear scene. The large kangaroo pocket on the front is equipped with zippers on both sides, ensuring your personal items stay with you and don’t fall out while riding. And when you’re on the go and don’t want the hood flapping around, you can simply secure it with the button. Features Protection Prepared for SEESOFT CE-Level 2 back protector The back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety. SEESMART CE-Level 1 elbow protectors SEESMART CE-Level 1 shoulder protectors SEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures. Thumb loops Ready for Avertum Tech-Air® airbag system - ONE SIZE UP Under this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: Measure your chest circumference and divide the value by two. Measure the garment flat at the chest line. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove any separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position. Visibility Laminated reflective logo on the chest Laminated reflective material on the hood Reflective panels ensure excellent visibility, allowing the wearer to be seen from all directions. For a more refined look, the reflective panels are welded to the fabric, saving seams, which benefits safety. Fit Regular fit Regular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body. Features Short connection zipper The short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit for comfort and safety. Jeans loop The loop on the back allows the jacket to be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past. Fixed hood Hood fixation with button Thanks to the fixation of the hood with a button, it does not flap around while riding and prevents the wind from catching in it. Adjustable drawstring at the hood Stretchable Outer fabric Polyester stretch Lining Mesh Pockets Kangaroo pocket in front The kangaroo pocket on the front keeps personal items within reach. It also keeps hands warm and gives this garment a cool street style look.

The Arena GTX Ladies offers 100% waterproofing, remarkable breathability, and year-round comfort. This modern, female-specific touring boot is equipped with GORE-TEX Performance Comfort. This three-layer laminate consists of a quick-drying textile lining, a microporous, waterproof membrane, and a protective knit. Simply put: dry, warm, and fresh feet, no matter what happens. Secured Feet This boot is designed for touring adventures in all seasons and challenging terrains. Therefore, it must be reliably durable and protect you at every stage of your journey. Impact protection in the risk zone of the ankle is regulated by the SEESOFT insert. There are additional reinforcements at the heel and shin, and a hard shell cap for the toes. And in the footbed, OrthoLite® insoles ensure a good fit. Design and Sophistication You might think that such a well-protecting boot could impair your control. Not so with the Arena GTX Ladies: the full-grain leather adapts to your foot shape, while the mix of soft stretch material and PWR|Mesh provides more freedom of movement and improves air circulation. Additional smart ideas provide extra confidence even under extreme conditions. Examples: Our unique rubber sole ensures maximum grip on the footpegs, and the rubber gear shift reinforcement prevents slipping off the gear lever when upshifting.FeaturesVentilationPerforation on the sidesVisibilityReflective material on the heelProtectionReinforced heelReinforced toe areaThermoformed shin protectionThermoformed shin protection Heat is used to shape this shin protection for a very vulnerable area that requires an exact and individual fit. The REV’IT! shin protection fits your leg perfectly for ultimate protection.ClosureVelcro closureGusset zipper with protective edgeFeaturesRubber gear shift reinforcementOrtholite® Eco-LT Hybrid insoleAccordion stretch insertsLining3D meshSoleRubber soleOuter materialFull-grain leatherPWR|MeshThis PWR|Mesh has a knitted, open structure that combines breathability with flexibility. It is also highly abrasion-resistant to protect motorcyclists on the road.Heavy stretchEspecially durable stretch fabric for use in footwear.Waterproofing3L GORE-TEX Vision membraneShoe-specific, waterproof three-layer membrane made by GORE-TEX.

Made from 100 percent soft and breathable cotton, the Arevik Beanie is a striking piece that allows you to express your own style while keeping your head warm, as a good beanie should. You have the choice of three color gradients, from subtle black-blue and black-gray to eye-catching black-orange.

The Schnürschuh Arrow combines the look and feel of a sneaker with the safety that characterizes all models in our extensive urban shoe collection. With thermoformed toe and heel caps, as well as injected ankle coverage, it meets CE requirements. Our partnership with OrthoLite® enhances the comfort you feel with every step. These partially ventilated sneakers embody the spirit of our Tailored Technology philosophy, making the Arrow quickly become your next favorite shoe, whether you're riding or walking. With this shoe, you'll stand out during the day, and thanks to the discreet reflector on the heel, even after sunset.FeaturesVentilationPerforation on the sidesMesh on the tongueThe mesh fabric on the shoe tongue provides ventilation and breathability.VisibilityReflective material on the heelProtectionReinforced heelReinforced toe areaClosureLacesFeaturesAdditional pair of laces in a different colorConstruction with attached tongueOrtholite X40 hybrid insoleUpper Material3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.Soft nubuck leatherSoft, perforated nubuck leatherSoleRubber sole

Die Axis 2 H2O motorcycle overpants have been designed to meet the needs of everyday commuters. We wanted to ensure that you arrive dry and safe from home to work and back again. These overpants are designed so that you can quickly pull them over jeans or chinos when rain suddenly starts without having to take off your boots. A long two-way zipper on the outside allows the Axis H2O to be fully opened, making it easier to get in. The outer shell is made of a robust 600D polyester fabric with height-adjustable SEESMART CE-Level 1 protectors at the knees. Additionally, there are darts sewn into the knee area that ensure the pre-shaped cut, which in turn provides extra comfort while riding. For additional safety, there are pockets at the hips that are prepared for our optional SEESMART CE-Level 1 hip protectors. The Axis 2 H2O motorcycle overpants have a regular fit but can be adjusted at the waist and ankles to allow for a personalized fit. To ensure that cold and moisture stay out, there is a wind and water catcher behind the entrance zipper. The belt loops are practical, allowing you to attach the pants to your motorcycle jacket with our Safeway belt. There is a laminated, reflective print on the calves that provides extra visibility.FeaturesWaterproofnesshydratex|G-LinerProtectionPrepared for SEESMART RV33 CE-Level 1 hip protectorsSEESMART CE-Level 1 knee protectorsThe SEESMART CE-Level 1 RV36 knee protector is our ultra-thin and comfortable protector for the knees on this garment.VisibilityLaminated reflective material on the calvesReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Adjustment OptionsAdjustable knee protectorAdjustable tab at the waistElastic waistAdjustable tab at the ankleFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesBelt loopsQuick-entry zipper at the side seamOuter FabricPolyester 600DThis polyester yarn fabric is a perfect, adaptable material for areas with low impact risk. For high wearing comfort.InsulationWind and water catcher behind the entrance zipper

You are looking for a lightweight and compact backpack that can carry your essential gear for your next one- or multi-day adventure? Well, we have the perfect solution for you. The Arid 9L H2O, developed in collaboration with the luggage experts at Kriega, offers an ideal combination of carrying comfort, storage space, and hydration system without restricting you in any way. The backpack features a waterproof 4-liter main compartment with a roll-top closure and a separate 5-liter zippered pocket that you can equip with a 3.75-liter hydration bladder (sold separately). The external Hypalon mesh with elastic cord provides useful additional storage or can be used, for example, as a place to store wet clothes that dry while you ride. For all-day riding comfort, the Arid 9L H2O backpack is equipped with the innovative Kriega QUADLOC-Lite™ harness system, which transfers the weight from the shoulders to the chest and upper body when fully loaded. Even more stability during the ride and additional support at the lower back comes from the removable hip belt. The backpack features an Air-Mesh back panel that prevents unwanted friction and heat buildup on your back, ensuring you stay comfortable during rides in warm weather. Take the Arid 9L H2O backpack on any adventure on or off the road. It protects your belongings from bad weather and ensures that you feel comfortable while riding and have enough to drink. * Dimensions: 400(h) x 210(w) x 130(d) mm * Volume: 9 liters * Weight: approx. 1030 gramsFeaturesAdjustment OptionsAdjustable hip beltAdjustable strapsVisibilityReflective print on the backCharacteristicsShock absorption on the backWaterproofingRemovable waterproof DrypackThe main compartment features a liner with taped seams, held in place with Velcro strips.ClosureQUADLOC-Lite™ harness systemThe QUADLOC-Lite™ harness system transfers weight from the shoulders to the chest and upper body, providing all-day comfort even when the backpack is fully loaded.

Dank unseres robusten Barren 18L H2O Rucksacks musst du keinen einzigen persönlichen Gegenstand bei deinen Abenteuern (ob kurz oder lang!) zuhause lassen. Wir haben ihn zusammen mit den Gepäckexperten von Kriega entwickelt und ihn so konzipiert, dass er jeder Herausforderung gewachsen ist. Er ist vollgepackt mit Funktionen, die deine wichtigsten Siebensachen vor schlechtem Wetter schützen und sorgt dafür, dass du dich während Fahrt wohlfühlst und genug zu trinken hast. Der Rucksack besteht aus drei Teilen: dem 100 Prozent wasserdichten 11-Liter-Hauptfach, einem 7-Liter-Rückenfach und einem zusätzlichen Stauraum hinter dem externen Hypalon-Netz. Das leicht zugängliche, wasserdichte Hauptfach mit Rollverschluss bietet mit 11 Litern Raum für alles, was du mitnehmen möchtest. Das hintere 7-Liter-Fach mit Reißverschluss kann zur Aufbewahrung einer Werkzeugrolle, einer Wasserflasche oder des optionalen 3,75-Liter-Trinkbeutels verwendet werden. So hast du immer genug zu trinken dabei, wenn du Motorrad fährst. Wertvolle Gegenstände bringst du in der kleinen internen und wasserdichten 1-Liter-Tasche unter, die sich ebenfalls im hinteren Bereich befindet. Das innovative Hypalon-Netz mit elastischer Kordel bietet weiteren externen Stauraum für zusätzliche Kleidung oder Sachen, die nass geworden sind. Die können so während der Fahrt trocknen. Darüber hinaus ist der Barren 18L H2O Rucksack mit dem innovativen Kriega QUADLOC-Lite™ Gurtsystem ausgestattet, das bei voller Beladung das Gewicht von der Schulter auf Brust und Oberkörper verteilt. Noch mehr Stabilität während der Fahrt und zusätzlichen Halt am unteren Rücken kommt durch den abnehmbaren Hüftgurt. Der Rucksack verfügt über ein Air-Mesh-Rückenpanel, das unerwünschte Reibung und Wärmeentwicklung an deinem Rücken verhindert, damit du dich während der Fahrt in warmem Wetter rundum wohlfühlst. Mit dem robusten Barren 18L H2O Rucksack kannst du gewiss sein, dass deine wichtigsten Sachen sicher und vor schlechtem Wetter geschützt sind, ohne dass du auf Komfort während der Fahrt verzichten musst. * Dimensions: 445(h) x 250(b) x 170(t) mm * Volume: 18 liters * Weight: approx. 1630 gramsFeaturesAdjustabilityAdjustable hip beltAdjustable strapsVisibilityReflective print on the backCharacteristicsShock absorption on the backWaterproofingRemovable waterproof DrypackThe main compartment features a lining with taped seams, secured in place with Velcro strips.ClosureQUADLOC-Lite™ harness systemThe QUADLOC-Lite™ harness system transfers weight from the shoulder to the chest and upper body, providing all-day carrying comfort, even when the backpack is fully loaded.

The Load 22L H2O backpack has been developed in collaboration with the luggage experts at Kriega, making it suitable for any journey on the road. We packed it with functionality that protects your belongings from the elements while ensuring you feel comfortable during the ride and have enough to drink. The waterproof ripstop main compartment with roll closure holds 18 liters of all the essential items that need to stay dry. The 4-liter front pocket with zipper provides additional storage space. With the side compression straps, you can make the backpack more compact when it is not fully loaded. Behind the rear compartment, you can install a 3.75-liter hydration reservoir, so you always have enough liquid with you on the motorcycle. The backpack is equipped with the innovative Kriega QUADLOC-Lite™ harness system, which distributes the weight from the shoulders to the chest and upper body when fully loaded. The removable hip belt adds extra stability during the ride. To avoid unwanted friction and heat buildup on your back, the backpack features an air-mesh back panel that provides additional carrying comfort. Pack your essential items and head to your destination without sacrificing comfort and style. * Dimensions: 430(h) x 235(w) x 220(d) mm * Volume: 22 liters * Weight: approx. 1445 gramsFeaturesAdjustabilityAdjustable hip beltAdjustable strapsVisibilityReflectionCharacteristicsShock absorption on the backWaterproofingRemovable waterproof DrypackThe main compartment features a lining with taped seams, held in place with Velcro strips.ClosureQUADLOC-Lite™ harness systemThe QUADLOC-Lite™ harness system transfers weight from the shoulders to the chest and upper body, providing comfort for all-day wear, even when the backpack is fully loaded.

The lightweight, robust, and minimalist Stack 15L H2O backpack allows you to take your essentials on your next short or long ride without sacrificing comfort. Developed in collaboration with the luggage experts at Kriega, this backpack is ready to embark on any journey to any destination. The easily accessible, waterproof main compartment with roll closure offers ample space for your personal items with 15 liters. The ripstop main compartment also features a small inner zip pocket for easy access to your most valuable items like your phone or wallet. Behind the waterproof lining of the main compartment, you can attach a 3.75-liter hydration reservoir (sold separately) to keep you hydrated on the go. The Stack 15L H2O is equipped with the innovative Kriega Quadloc-Lite™ harness system, which transfers the weight from the shoulders to the chest and upper body when fully loaded. Additional stability during the ride and extra support at the lower back come from the removable hip belt. The backpack features an air-mesh back panel that prevents unwanted friction and heat buildup on your back, ensuring you stay comfortable during warm weather rides. With the sleek-looking Stack 15L H2O backpack, you can carry your most important items while protecting them from the elements. No matter what you’re transporting, you won’t compromise on comfort when traveling from A to B. * Dimensions: 480(h) x 240(w) x 140(d) mm * Volume: 15 liters * Weight: approx. 1364 gramsFeaturesAdjustabilityAdjustable hip beltAdjustable strapsVisibilityReflective print on the backCharacteristicsShock absorption on the backWaterproofingRemovable waterproof DrypackThe main compartment features a lining with taped seams that is held in place with Velcro strips.ClosureQUADLOC-Lite™ harness systemThe QUADLOC-Lite™ harness system transfers weight from the shoulders to the chest and upper body, providing all-day carrying comfort even when the backpack is fully loaded.

The flat brim cap with a flat visor is an essential part of streetwear, and our Oslo cap fits perfectly into that category. Available in black with a white REV'IT! shield logo on the front or in gray mélange with a black emblem, you get the perfect cap to hide your post-helmet hairstyle. Or you can simply wear it to complement your casual outfit – the choice is yours.FeaturesAdjustment OptionsAdjustment StrapOuter FabricPolyester

With the camouflage pattern that matches some of our favorite adventure outfits, the Wanderer cap is just right for the adventurer in you. The subtle two-tone, purposeful look and the quality of craftsmanship make it a good-looking and durable cap. Ideal for hiding your hair after a long day of riding, protecting your sensitive scalp from the elements, or simply as a comfortable cap to complete your casual outfit.FeaturesAdjustment OptionsAdjustable StrapOuter FabricPolyester

To each pair of heated gloves belong two 7.4V batteries and a micro-USB 2-in-1 charging cable (without USB connection). The batteries can be easily connected to the integrated cable in the gloves and removed from the designated pocket with Velcro at the bottom of the cuff. This pocket allows for quick access. Depending on the rider's heat requirements, the charge lasts approximately for the following durations: MODE 4: 100% - Red - Boost - 130 minutes MODE 3: 75% - Orange - Performance - 170 minutes MODE 2: 50% - Yellow - Normal - 240 minutes MODE 1: 25% - White - Eco - 480 minutes The charging time is approximately 4-5 hours when using a USB-A wall charger that provides [email protected]. The size in centimeters is 7.4 x 5.0 x 1.4. TECHNICAL DATA - Power: 7.4V, 2350mAh, 17.39Wh - Input: (Micro USB) 5V 1.2A - DC Port Output: 7.4V @1.8A - LED Battery Indicator - Charging Time: 4-5 hours* - Size in inches: 4.5 x 2.7 x 0.62 * The charging time is based on the use of a USB-A wall charger that provides [email protected]. INCLUDES - 2 x 7.4V+ Battery - Micro USB 2-in-1 Charging CableFeaturesFeaturesBattery Set REV'IT! Thermotronic Heating TechnologySet with two 7.4V batteries and micro-USB cable.

The Cape Beanie fits into any wardrobe, whether it's for everyday use or for motorcycling. It looks great and keeps you really warm when you're not sitting on the handlebars. This versatile, finely knitted beanie with its subtle branding goes with everything and ensures a warm head.Features

More warmth than the Root Beanie is hard to find. It is knitted from 100 percent acrylic fiber and built to last. With a classic black, a subtle army green, and a fashionably striking ochre yellow, there is a wide selection available. The REV'IT! branding is kept to a minimum, allowing the beanie to match both your motorcycle outfit and any other occasion.FeaturesOuter MaterialPolyacrylic

The simple yet stylish plateau beanie features the REV’IT! logo in a clean execution. Its neutral tone matches any motorcycle attire, whether chic or casual. No matter where you are, in the middle of nowhere or in the city, you will stay warm and look good.Features

The Safeway 2 belt allows you to connect your jeans to your jacket through the connecting zipper. With the belt, you can ride more securely and comfortably, as your back is covered and protected at all times. Most REV'IT! jackets are equipped with the short connecting zipper that is compatible with the Safeway 2 belt. Once the belt is on, a large part of the force is applied to the diagonal belt loops on the sides and back, which are included with every REV'IT! jean.

Wenn du durch die Stadt fährst, ob bei Regen oder Sonnenschein, hat deine Hose einen klaren Auftrag: Sie soll jede Fahrt so bequem wie möglich machen. Damit sie das über alle Jahreszeiten hinweg tun kann, muss sie vielseitig sein. Deshalb besteht die Berlin H2O Ladies Hose aus einem dreilagigen Softshell-Material, das sowohl atmungsaktiv als auch thermisch belastbar ist und damit ideal für Fahrten zu verschiedenen Jahreszeiten. Dank des langen Reißverschlusses lässt sich die Hose schnell an- und ausziehen. Zipp zipp hurra. Warm und wasserdicht Die 100 Prozent wasserdichte hydratex Beschichtung wird auf das Futter der Hose aufgetragen, so dass selbst strömender Regen dir nicht den Tag verhagelt. Außerdem ist der Zugangsreißverschluss, der über die gesamte Länge der Hose verläuft, mit einem Wind- und Wasserfänger ausgestattet. Selbst wenn schnell fährst oder durch eine Riesenpfütze, hast du es trocken und warm. Sicher und sichtbar Ob du gelegentlicher Pendler oder ernsthafte Kilometerfresser bist, du wirst mit Sicherheit den unterschiedlichsten Straßenverhältnissen begegnen. Wenn deine Fahrt dich wirklich auf die Probe stellt, sind der SEESMART CE-Level 1 Knie- und Hüftprotektoren da, um dich vor Schaden zu bewahren. Auffällige reflektierende Details im Knöchelbereich verbessern deine Sichtbarkeit auf den Straßen der Stadt und über Land.FeaturesWasserdichtigkeithydratex|Mesh G-LinerDie 100% wasserdichte hydratex|G-Liner Beschichtung befindet sich auf dem Netzfutter des Kleidungsstücks. Die Nähte sind abgedichtet, damit ist es total wasserdicht. Das maximiert den Tragekomfort und sichert gleichzeitig die funktionalen Eigenschaften der G-Liner-Bauweise.SchutzVorbereitet für SEESMART RV33 CE-Level 1 HüftprotektorenSEESMART CE-Level 1KnieprotektorenDer SEESMART CE-Level 1 RV36 Knieprotektor ist unser ultradünner und bequemer Schützer für die Knie an diesem Kleidungsstück.VerstellmöglichkeitenVerstellbarer KnieprotektorVerstelllasche an der TailleVerstelllasche am FußknöchelPassformRegular fitRegular Fit steht für einen hohen Tragekomfort und passt sich verschiedenen Körperformen und -größen an, gilt jedoch nicht als locker. Er betont nicht die Figur des Benutzers, sondern fällt um den Körper herum.TaschenEinschubtaschen an der HüfteOberstoffSoftshell 3LIsolierungWind- und Wasserfänger hinter dem EingangsreißverschlussSichtbarkeitLaminierte Reflektoren an den KnöchelnRetroreflektierende, fluoreszierende Beschichtung an den Knöcheln für bessere Sichtbarkeit und mehr Sicherheit bei schlechten Lichtverhältnissen.MerkmaleYKK Aquaguard® Zwei-Wege-Reißverschluss mit leichtem EinstiegWasserdichter, leichter und strapazierfähiger Zwei-Wege-Reißverschluss von YKK. Ermöglicht einen einfachen Zugang.YKK Aquaguard® Reißverschluss mit leichtem EinstiegWasserdichter, leichter und strapazierfähiger Reißverschluss von YKK. Ermöglicht einen einfachen Zugang.ÜberhoseSchützende, wasserdichte Überhose, die der Fahrer über der normalen Hose oder Motorradjeans trägt.

Wenn du Regen oder Sonnenschein durch die Stadt fährst, hat deine Hose einen klaren Auftrag: Sie soll jede Fahrt so bequem wie möglich machen. Damit sie das über alle Jahreszeiten hinweg tun kann, muss sie vielseitig sein. Deshalb besteht die Berlin H2O Hose aus einem dreilagigen Softshell-Material, das sowohl atmungsaktiv als auch thermisch belastbar und damit ideal für Fahrten zu verschiedenen Jahreszeiten ist. Dank des langen Reißverschlusses lässt sich die Hose schnell an- und ausziehen. Zipp zipp hurra. Comfortably waterproof The 100 percent waterproof hydratex coating is applied to the lining of the pants, so even pouring rain won't ruin your day. Additionally, the access zipper that runs the full length of the pants is equipped with a wind and water catcher. Even when you’re riding fast or splashing through a huge puddle, you’ll stay dry and warm. Protection and reflection Whether you’re a casual commuter or a serious mile muncher, you’re sure to encounter a variety of road conditions. When your ride really puts you to the test, the SEESMART CE-Level 1 knee and hip protectors are there to keep you safe. Eye-catching reflective details in the ankle area enhance your visibility on the city streets and beyond.FeaturesWaterproofnesshydratex|Mesh G-LinerThe 100% waterproof hydratex|G-Liner coating is located on the mesh lining of the garment. The seams are sealed, making it completely waterproof. This maximizes comfort while ensuring the functional properties of the G-Liner construction.ProtectionPrepared for SEESMART RV33 CE-Level 1 hip protectorsSEESMART CE-Level 1 knee protectorsThe SEESMART CE-Level 1 RV36 knee protector is our ultra-thin and comfortable protector for the knees on this garment.AdjustabilityAdjustable knee protectorAdjustable tab at the waistAdjustable tab at the ankleFitRegular fitRegular fit stands for high comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.PocketsSlip pockets at the hipsOuter fabricSoftshell 3LInsulationWind and water catcher behind the entrance zipperVisibilityLaminated reflectors at the anklesRetro-reflective, fluorescent coating at the ankles for better visibility and increased safety in low light conditions.FeaturesYKK Aquaguard® two-way zipper with easy entryWaterproof, lightweight, and durable two-way zipper from YKK. Allows for easy access.YKK Aquaguard® zipper with easy entryWaterproof, lightweight, and durable zipper from YKK. Allows for easy access.OverpantsProtective, waterproof overpants that the rider wears over regular pants or motorcycle jeans.

The sporty Beta motorcycle leather suit offers the ideal combination of performance and comfort for the rider who enjoys touring - at any speed. The suit is rated AAA, the highest CE certification, and provides optimal freedom of movement. This is made possible by several abrasion-resistant stretch inserts on the front of the body, on the back, under the arms, over the knees, and on the inner sides of the legs. This full leather suit meets all requirements regarding abrasion resistance and impact protection. Our SEEFLEX CE-Level 2 protectors are used at the shoulders, elbows, and knees. The suit is also prepared for our SEESOFT CE-Level 2 back and chest protectors. Our hard-shell shoulder protectors, derived from MotoGP, emphasize the sporty style of the Beta motorcycle leather suit and provide additional protection in the event of asphalt contact. The knees are equipped with a leather cover with Velcro, which you can replace with our knee sliders (not included). To ensure you feel comfortable even on warm days, we have added 3D mesh ventilation inserts at the shoulders and perforated leather inserts on the chest to provide fresh air to your upper body. So don't worry if you give it a bit more gas on your next trip. The sporty Beta motorcycle leather suit keeps your back free so you can take corners without worry.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.Prepared for two-part SEESOFT CE-Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part chest protector SEESOFT CE-Level 1 – an easy upgrade for even more safety.SEEFLEX CE-Level 2 knee protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEESMART CE-Level 1 hip protectorsSEESMART hip protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.Safety seamsThe seams determine the durability of a motorcycle garment in the event of a fall. Therefore, REV’IT! uses only safety seams in areas at risk of falling. These have a visible and an invisible seam. This construction keeps the outer shell together, even if the visible seam is worn through.TPU protectors on the shoulderTailbone protectionVentilationPerforation on the upper frontAir inlet at the shoulderAdjustment optionsAdjustable knee protectorPocketsTwo inner pocketsNapoleon inner pocketInsulationWind blocker behind the front zipperBehind the front zipper, there is a wind-blocking cover strip.Wind blocker behind cuff zipperFeaturesComfort collarThe comfort collar adds extra coziness at critical points. Here, an extra soft fabric provides a snug atmosphere.Comfort cuffsZipper at the cuffThe zipper at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.Calf zippersSoft collar edgeThe inside of the collar is equipped with a soft fabric for more wearing comfort.Front closure with carabiner hookOuter fabric3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.Polyester 600DThis fabric made from polyester yarn is a perfect, adaptable material for areas with low impact risk. For high wearing comfort.PWR|Shell StretchNULLBuffalo leatherThis garment uses buffalo leather for optimal fit and protection.Synthetic leatherA synthetic leather version with a similar appearance.Polyester stretchArtificial nubuckVisibilityReflective fabric on the backThis product features reflective fabric on the back to help motorcyclists be seen better in low light, bad weather, and/or at night.

The Bornite H2O Ladies Motorcycle Glove has been specifically designed for women. We want your hands to be safe and warm on days when winter temperatures would otherwise keep you from your daily ride. It’s easy to make winter-ready motorcycle gloves that keep your hands warm. However, it’s not so easy to ensure they still provide enough feel so you can comfortably and safely operate your two-wheeler. By using a firmly integrated Fiberfill® lining, you get plenty of warmth without losing the feel on the handlebars. Additionally, there’s a high-loft fur lining for more comfort and 100% waterproofing thanks to the hydratex membrane – we’ve packed in a lot of comfort. Practical safety features such as a visor wiper, soft knuckle protection, and a palm protector made of double-layered PWR|Shell for crash protection are also included. Finally, we’ve added reflective material to the fingers, back of the hand, and cuff so you can be seen better by other road users in low-light conditions. All in all, the Bornite H2O Ladies Glove has all the necessary features to keep you riding even when the winter cold tries to stop you.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, effectively retaining warmth.Fixed FiberfillClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.ProtectionTemperfoam® KnucklePWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer Fabric600D PolyesterThis fabric made from polyester yarn is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface, creating a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back HandBrand emblem made from laminated reflective material, which increases visibility.

The Bornite H2O motorcycle glove has everything you need to get through the cooler months. This model covers more than just your basic commuting needs; it comes standard with practical features for cold weather. The permanently integrated Fiberfill® lining provides ample warmth without compromising your feel for the handlebars. Because we all know that motorcycle gloves with too much insulation rob you of the right amount of riding sensation. The high-loft fur lining envelops your hands in comfort, while the hydratex membrane ensures 100% waterproofing. A visor wiper removes the moisture that restricts visibility on rainy days. The soft knuckle shell and double-layered inner hand protection made from PWR|Shell provide protection and flexibility. Reflective elements on the fingers, the back of the hand, and the cuff ensure your visibility in low-light conditions. There is an adjustment option at the wrist, and the stretch material provides a comfortable city fit. Thanks to the conductive fabric on the index finger and thumb, you don't have to take off the glove when using a touchscreen. With the Bornite H2O gloves, you won't want to miss any opportunity to get on your motorcycle.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, effectively retaining warmth.Fixed FiberfillClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.ProtectionTemperfoam® KnucklePWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer Fabric600D PolyesterThis polyester yarn fabric is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back of the HandBrand emblem made from laminated reflective material, which increases visibility.