Rear Hugger incl. Upper Chainguard S 1000 XR from MY 2020
Product number:
1004-KHO.009.1XR20.K
Product information "Rear Hugger incl. Upper Chainguard S 1000 XR from MY 2020"
Bolted to the original attachment points. the rear fender made of carbon has proven itself in all situations. It protects the rider and motorcycle much better from the dirt coming from the rear wheel. The exposed chain guard was also lengthened in its construction compared to the original part. This means that unwanted stains - by a well-lubricated chain - on bike and rider are a thing of the past.
But not only technically. but also optically. the rear fender can utilize its full potential. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to achieve a particularly harmonious overall appearance. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result.
The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.
Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.
Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.
A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.
The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.
Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component.
The expertise gained from this flows into each of our products. improving every single component.
The facts:
- Production in our own facility according to ISO 9001
- Including ABE - Part is legal to use on the street
- Use of prepreg specially developed for Ilmberger
- Manufacturing in autoclave for maximum strength and perfect surfaces
- Unique plastic powder coating for protection and a special depth effect
- Hand lamination by experts with years of experience
- Precise edge cutting by robot
- High-gloss clear coat layer for a flawless surface
- No aging of parts thanks to multi-layer protection against UV light
- Delivery in ready-to-install condition
- TÜV-certified quality
Login
Accessory Items
Seat Unit (left side) S 1000 XR from MY 2020
€399.90*
Discreet and yet perfectly visible - these words are probably the best way to describe the rear fairing on the left. Installed in just a few minutes. it increases the value of the motorcycle enormously.
In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result.
For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.
In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.
So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.
The facts:
- With general operating permit (ABE)
- Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds
- Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light
- Delivery ready for installation
- TÜV certified quality
- made of prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Attachment using the original attachment points
- quick and easy assembly
Seat Unit (right side) S 1000 XR from MY 2020
€399.90*
Discreet and yet perfectly visible - these words are probably the best way to describe the rear fairing on the left. Installed in just a few minutes. it increases the value of the motorcycle enormously.
In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result.
For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.
In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.
So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.
The facts:
- With general operating permit (ABE)
- Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds
- Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light
- Delivery ready for installation
- TÜV certified quality
- made of prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Attachment using the original attachment points
- quick and easy assembly
Upper rear fairing
€189.90*
Mounted directly above the license plate holder. the upper carbon rear fairing complements the motorcycle in an exclusive way. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. The compination with the number plate holder in Carbon is particularly good
For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.
In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.
So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.
The facts:
- With general operating permit (ABE)
- Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds
- Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light
- Delivery ready for installation
- TÜV certified quality
- made of prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Attachment using the original attachment points
- quick and easy assembly
Front Mudguard (long version) S 1000 XR from MY 2020
€329.90*
When the latest high-tech materials meet modern designs. the result is often overwhelming. And the extended front fender made of carbon is not only visually impressive. Thanks to the latest technology in the field of powder coating. it is optimally protected against all common environmental influences. Thanks to its optimized shape. it also protects the water cooler behind it. In the factory state. this is constantly exposed to the thrown away dirt and other environmental influences. coming from the front wheel. In contrast. the Ilmberger Carbon fender is a little longer. Just as long as needed to keep as much dirt as possible away from the radiator and at the same time short enough to fit perfectly into the lines of the motorcycle.
The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.
Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.
Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.
A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.
The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.
Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component.
The expertise gained from this flows into each of our products. improving every single component.
The facts:
Production in our own facility according to ISO 9001
Including ABE - Part is legal to use on the street
Use of prepreg specially developed for Ilmberger
Manufacturing in autoclave for maximum strength and perfect surfaces
Unique plastic powder coating for protection and a special depth effect
Hand lamination by experts with years of experience
Precise edge cutting by robot
High-gloss clear coat layer for a flawless surface
No aging of parts thanks to multi-layer protection against UV light
Delivery in ready-to-install condition
TÜV-certified quality
Similar Items
Alternator cover BMW S 1000 XR from MY 2020
€199.90*
Mounted on the motorcycle in a very short time. the alternator cover offers good additional protection for the components underneath. The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result.
The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.
Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.
Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.
A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.
The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.
Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component.
The expertise gained from this flows into each of our products. improving every single component.
The facts:
Production in our own facility according to ISO 9001
Including ABE - Part is legal to use on the street
Use of prepreg specially developed for Ilmberger
Manufacturing in autoclave for maximum strength and perfect surfaces
Unique plastic powder coating for protection and a special depth effect
Hand lamination by experts with years of experience
Precise edge cutting by robot
High-gloss clear coat layer for a flawless surface
No aging of parts thanks to multi-layer protection against UV light
Delivery in ready-to-install condition
TÜV-certified quality