Charger BC K900 EVO+ for Lead-Acid and Lithium Batteries Battery Charger / Maintenance Device

BC K900 EVO+ is the only charging and maintenance device for all 12V lead-acid and lithium batteries with CAN-Bus compatible charging program for charging through the DIN 4165 12V socket of motorcycles with CAN-Bus system (e.g., BMW).
BC K900 EVO+ is not only ideal for restoring, charging, and maintaining all scooter, ATV, and motorcycle batteries, but it can also be used for the care of car batteries. The device can remain connected to the battery as long as the vehicle is unused.
The mode selection is simple; it is only necessary to press a button. 3 LEDs indicate the mode in use, which is stored for later use.
BC K900 EVO+ performs automatic microprocessor-controlled multi-cyclic charging processes (8 cycles for lead-acid batteries, 7 cycles for LiFePO4 batteries). The charging technology for lead-acid batteries is ideal for recharging deeply discharged batteries (from 1.25 volts) and for charging, desulfating, and maintaining all 12V batteries up to 100 Ah. The LiFePO4 program allows for the recovery of deeply discharged batteries, fast/powerful charging, balancing between battery cells, and maintaining the battery over extended periods. Safety is always ensured: at low temperatures, detected by an integrated sensor, the POLAR mode is activated.
The device delivers a maximum current of 0.9 amperes and is suitable for batteries from 1.2 to 100 Ah. Two LEDs indicate the phase being executed as well as any error messages. BC K900 EVO+ is protected against short circuits, reverse polarity, overvoltage, and overheating.

The packaging includes:
- a waterproof cable with eyelets that can always remain mounted on the vehicle
- a connection cable with insulated clamps
- a 12/18 mm universal adapter (optional accessory) to charge the battery via a cigarette lighter


TECHNICAL DATA:
- Input voltage 220-240 V AC, 50-60 Hz
- Output voltage 13.8 V / 14.4 V - Nominal 12 V (mode 12 Volt)
- Charging current 0.9 A max.
- Battery types 12 V lead-acid (wet batteries, gel, maintenance-free, VRLA, AGM, Ca/Ca, etc.) & 12V LiFePO4
- Charging algorithm - Lead-acid 8 automatic charging stages (initialization, recovery, trickle charge, bulk charge, desulfation, battery analysis, maintenance, balancing)
- Battery capacity - Lead-acid from 1.2 Ah to 100 Ah (maintenance)
- Charging algorithm - LiFePO4 7 automatic charging stages (initialization, recovery, trickle charge, bulk charge, battery analysis, maintenance, balancing)
- Battery capacity - LiFePO4 from 1 Ah to 100 Ah
- Operating temperature from -20° to +50°C
- IP protection class: Weather-resistant - Splash-proof IP44 (suitable for outdoor use)