BMW R1200GS LC stainless steel brake lever foldable for BMW R1200GS from 2013 / BMW R1200GS Adventure from 2014

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which is particularly advantageous when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving characterizes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engravingIncludes ABE. (Extension for BMW F900GS in preparation)

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered suspension.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5276-0 for that.Attention: Regardless of the model year, different side stands have been installed, so we recommend checking the shape of your side stand as well.Please use for: - Wide shape 01-045-5276-0- Narrow shape 1021-01-045-5275-0

Often, it's the little things that are missing for the optimal riding experience. While the original gear lever of the GS can be adjusted in height, it cannot be adjusted in length. The gear lever from Touratech can be precisely adjusted to your foot, and since it is foldable, it won't break off with every fall. Additionally, the gear lever made from a high-quality aluminum-stainless steel material mix enhances the visual appeal of your GS!Adjustment range: 32 mm