Superbike handlebar adapter and handlebar riser with offset 50mm ABE for BMW R850GS R1100GS

The Handlebar Adapter for BMW R850GS-R1100GS

The handlebar adapter in a new design - extension of 50 mm

including ABE

The new handlebar adapter for all 22 mm handlebars improves your seating position by an optimal 50 mm. The handlebar comes 50 mm closer to the rider and about 25 mm higher.

This achieves a natural ergonomics for a healthier sitting position.

You will clearly feel this advantage. No more tense, outstretched arms. You simply sit comfortably on your motorcycle and no longer lean so far forward towards the tank, which is a significant advantage for men. The tingling and numbness in your hands are now a thing of the past.

The base adapter is secured with M8 screws and has an elongated hole with a center distance of 31 mm - 39 mm.

For all motorcycles with 22 mm handlebars, whose riders want to bring the handlebars even closer, we offer our 70 mm variant.

The conversion is quick and easy to implement:
Remove the existing handlebar clamps - (Please ensure that the reservoirs for brake and clutch fluid do not tip over too much!) - and insert the lower part of the adapter. Now just place the handlebar in the new mounts and secure it with the included handlebar clamps. All necessary screws are included with the conversion.

In general, it is sufficient for the BMW R850GS-R1100GS to route the cables and lines behind the fork bridge. In some models, the lines may need to be replaced with longer ones. Just contact us.

We also offer adapters for 25 mm and 28 mm handlebars; for 22 mm, the hole distance is 31 - 39 mm, while for 25 mm or 28 mm handlebars, the hole distance is 36 - 42 mm.

They are available in silver anodized or black.
Please select when ordering.

All items have been mounted and tested on original motorcycles - without aftermarket modifications.