BMW K1 K 1 tubular handlebar adapter handlebar adapter adjustable with ABE

€175.00*

Available, delivery time: 4 Tage

Product number: 1008-90000-k1

Product information "BMW K1 K 1 tubular handlebar adapter handlebar adapter adjustable with ABE"

BMW Models - Closer - Higher - Further
The first adjustable handlebar adapter for BMW K1

WE SET STANDARDS

With the adjustable handlebar adapter, we have succeeded in manufacturing an adjustable adapter that fits nearly all series-produced motorcycles with tubular handlebars from 1910 to today and in the future – just like your BMW K1.

Tubular handlebars have existed since the inception of series motorcycles. However, different arm lengths do too. There are some "lucky" ones among us who simply sit on the motorcycle and say: "This fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.

Every motorcyclist knows the tension in the body and neck area that arises from tense arm positions during longer rides. This well-known issue among racers is often resolved through surgical intervention. However, one must refrain from riding for 2-3 months afterward.

No one needs to fool themselves: "I only have this today!". You will experience these issues on every ride. As long as you sit tense on the motorcycle, you will not achieve comfort while riding.

We have now solved this problem for motorcycles with tubular handlebars.

With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.

This allows you to achieve a natural ergonomics for a healthier sitting position.

With adjustment times of only about 2 minutes, the handlebars can be quickly adapted to the respective tour. A high handlebar position for highway riding followed by sporty cornering in the mountains is now no longer an obstacle.

The adapters are equipped with a strong milled knurling on the holding pin. This has achieved an extreme anti-twist protection, which is especially necessary during strong braking maneuvers.

The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.

On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.
(see photo).

For the BMW K1, the impact plate needs to be slightly adjusted.

Please keep in mind that we cannot check all models. However, you can check on your motorcycle whether the brake and clutch hoses are long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not strained or pinched.

All items have been mounted and tested on original motorcycles - without any modifications.

Baugruppe:	Steering
Marke:	BMW
Modell:	K1

No reviews found. Share your insights with others.

Similar Items

BMW K1 K 1 Passenger Footrest Lowering Adjustable 40 mm Lower ABE

Footpeg Lowering Kit Adjustable for BMW K1 - 40 mmincluding ABEWith the new footpeg adapter for your motorcycle, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter in its basic form fits 98% of all motorcycle models.The optimal leg angle is 90°. A bent leg angle also bends the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.With the adapter, a lowering of the peg by 40 mm is achieved. In general, the basic adapter can be mounted upwards or downwards.This allows for a natural ergonomics and a healthier sitting position.After installation, the adapters can be adjusted every 4° so that the footpeg is positioned vertically downwards. The passenger even has the benefit of being able to adjust the peg upwards if there is enough space available.Depending on the setting, the passenger achieves a healthy and comfortable leg position.The complete kit for both sides is supplied with side compensation depending on the model. This variant is slightly more expensive but necessary, as for example, the exhaust must be bridged.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.As with all adjustable products, the footpeg adapter is also characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".Please consider that lowering the footpeg also means less lean angle.The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

€157.38*

BMW K1 K 1 Passenger Footrest Lowering Adjustable 60 mm Lower ABE

Footpeg Lowering Kit Adjustable for BMW K1 - 60 mmincluding ABE With the new footpeg adapter for your BMW, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models. The optimal leg angle is 90°. A bent leg angle also compresses the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.With the adapter, you achieve a lowering of the peg by 60 mm. Generally, the basic adapter can be mounted upwards or downwards.This allows for a natural ergonomics and a healthier sitting position.After installation, the adapters can be adjusted every 4°, allowing the footpeg to be positioned vertically downwards. The passenger even has the benefit of adjusting the peg upwards if there is enough space available. Depending on the setting, the passenger achieves a healthy and comfortable leg position. The complete kit for both sides is delivered with side compensation depending on the model. This variant is slightly more expensive but necessary, as, for example, the exhaust must be bridged.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters. As with all adjustable products, the footpeg adapter is also characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".Please note that lowering the footpeg also means less lean angle. The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

€157.38*

BMW K1 K 1 tubular handlebar adapter handlebar adapter adjustable with ABE

Product information "BMW K1 K 1 tubular handlebar adapter handlebar adapter adjustable with ABE"

Login