BLACK-T Lowering -30mm for Indian FRT 1200 / FTR 1200 S (2019-2021) Replacement Springs

The Black-T Shock Absorber Stage3 is a true suspension upgrade for your Indian. The Black-T spring preload allows for easy and precise adjustment of the motorcycle's balance to meet your requirements. The Stage3 shock absorber's reservoir enables the powerful separate piston design. The separate adjustability of rebound and compression completes the high-end fine-tuning. Black-T High Performance Suspension for every road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding styles. A completely new experience of comfort and riding dynamics for your Indian.   Key Facts: - We recommend having the installation and setup of the shock absorber done by a professional workshop. - The shock absorber is configured and prepared based on our experiences for the Indian FTR 1200 / FTR 1200 S. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.   Technical Info: - Black-T shock absorber in gas/oil - separate piston design - Adjustable spring preload with tool - 50 clicks adjustable rebound damping - Black linear spring - 50 clicks adjustable rebound damping - 30 clicks adjustable compression damping - Compression damping adjustable in high & low speed - 16 mm piston rod - 46 mm piston diameter   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of Delivery: - Ready-to-install Black-T Stage3 shock absorber. - ABE documents (online) - Installation and assembly instructions   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

This shock absorber is perfect for reducing the seat height (-30mm) for the INDIAN FTR 1200 / FTR 1200 S. At the same time, the large adjustment range remains, allowing for a perfect adaptation of balance and damping. The Stage2 shock absorber can be adjusted for load adjustment for 2-person operation and/or luggage using adjustment tools. This brings the INDIAN FTR 1200 / FTR 1200 S back into the correct riding balance. The rebound adjustment completes the necessary fine-tuning. Black-T High Performance Suspension for every road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding styles. A lowering with riding dynamics for your INDIAN FTR 1200 / FTR 1200 S.   The key facts: - We recommend having the installation and adjustment of the shock absorber done by a professional workshop. - The shock absorber is configured and ready to ride based on our experiences for the INDIAN FTR 1200 / FTR 1200 S. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.   This will severely impair the motorcycle's handling.   Note: For the safe stand of your INDIAN FTR 1200 / FTR 1200 S after lowering, we recommend shortening the side stand.   Technical Info: - Black-T shock absorber -30mm in gas/oil - emulsified construction - Adjustable in spring preload with tools - 50 clicks adjustable rebound damping - Black spring continuously progressive - 16 mm piston rod - 46 mm piston diameter   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install Black-T Stage2 shock absorber -30mm. - Adjustment tool - ABE documents (online) - Installation instructions   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

This shock absorber is perfect for reducing the seat height (-30mm) for the INDIAN FTR 1200 / FTR 1200 S. At the same time, the large adjustment range allows for perfect tuning of balance and damping. The reservoir of the Stage3 shock absorber enables the powerful separate piston design. The separate adjustability of rebound and compression completes the high-end fine-tuning. Black-T High Performance Suspension for every road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding styles. A lowering with riding dynamics for your INDIAN FTR 1200 / FTR 1200 S.   The key facts: - We recommend having the installation and adjustment of the shock absorber done by a professional workshop. - The shock absorber is configured and prepared based on our experiences for the Indian FTR 1200 / FTR 1200 S. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. This will severely impair the motorcycle's handling.   Note: For the safe stand of your INDIAN FTR 1200 / FTR 1200 S after lowering, we recommend shortening the side stand.   Technical Info: - Black-T shock absorber in gas/oil - separate piston design - Adjustable in spring preload with tools - 50 clicks adjustable rebound damping - Black linear spring - 50 clicks adjustable rebound damping - 30 clicks adjustable compression damping - Compression damping adjustable in high & low speed - 16 mm piston rod - 46 mm piston diameter   The base setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install Black-T Stage3 shock absorber -30mm - ABE documents (online) - Conversion and installation instructions   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.  

A lowering of the front with fork springs from Black-T Suspension. With this spring set, you achieve a sensible lowering of -30mm without compromising the riding characteristics. Of course, some ground clearance is lost. The continuously progressive springs are perfectly tuned to the Indian FTR 1200 / FTR 1200 S and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs.   Info: Fits only for “Indian FTR 1200 / FTR 1200 S (2019-2021)“   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - When replacing only one component, optimal riding behavior is not achieved. - You can find the matching components for your Indian FTR 1200 / FTR 1200 S in the accessories of this item. “Please scroll down”   Delivery includes: - Fork springs -30mm - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. - Installation instructions with setup information,   Our recommendation: Have the conversion carried out by a specialist workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

More performance and comfort for your INDIAN FTR 1200 / FTR 1200 S with the Black-T Shock Absorber Stage2. Whether you're heading out for a leisurely weekend tour with friends or planning a longer trip, the wide adjustment range allows for perfect tuning of balance and damping. The Stage2 shock absorber can be adjusted for load adaptation for 2-person operation and/or luggage using an adjustment tool. This brings the Indian back into the correct riding balance. The rebound adjustment completes the necessary fine-tuning. Black-T High Performance Suspension for every road condition and purpose. Whether it's highways, federal roads, small country roads, or spirited, ambitious riding styles. A completely new experience in riding dynamics for your INDIAN FTR 1200 / FTR 1200 S.   Key Facts: - We recommend having the installation and adjustment of the shock absorber done by a professional workshop. - The shock absorber is configured and ready to ride based on our experiences for the INDIAN FTR 1200 / FTR 1200 S. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.   Technical Info: - Black-T shock absorber in gas/oil - emulsion design - Adjustable in spring preload with tool - 50 clicks adjustable rebound damping - Black spring continuously progressive - 16 mm piston rod - 46 mm piston diameter   The base setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of Delivery: - Ready-to-install Black-T Stage2 shock absorber. - Adjustment tool - ABE documents (online) - Installation instructions   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document