Product number:
1008-90000-r850gs
Product information "Adjustable handlebar adapter and handlebar riser with 70mm offset ABE for BMW R1100GS"
BMW Models - Closer - Higher - Further
The first adjustable handlebar adapter for BMW R850GS-R1100GS / Adventure
WE SET STANDARDS
incl. ABE
Handlebars have existed since the inception of series motorcycles. However, there are also different arm lengths. There are some "lucky" ones among us who simply sit on the motorcycle and say: "That fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.
Every motorcyclist knows the tension in the body and neck area that arises from tense arm positions during longer rides. This well-known issue among racers is often resolved through surgical intervention. However, one must refrain from riding for 2-3 months afterward.
No one needs to fool themselves: "I’ll just do this today!". You will experience these issues on every ride. As long as you sit tense on the motorcycle, you will not achieve comfort while riding.
We have now solved this problem for motorcycles with handlebars.
With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.
This allows you to achieve a natural ergonomics for a healthier sitting position.
With adjustment times of only about 2 minutes, the handlebars can be quickly adapted to the respective tour. A highway ride with a high handlebar position followed by sporty cornering in the mountains is now no longer an obstacle.
The adapters are equipped with a strong milled knurling on the holding pin. This has achieved an extreme anti-twist protection, which is especially necessary during strong braking maneuvers.
The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.
On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.
(see photo).
The brake line for the BMW R850GS-R1100GS only needs to be routed and does not need to be extended.
Please keep in mind that we cannot check all models. However, you can check on your motorcycle whether the brake and clutch hose is long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not tense or pinched.
The first adjustable handlebar adapter for BMW R850GS-R1100GS / Adventure
WE SET STANDARDS
incl. ABE
Handlebars have existed since the inception of series motorcycles. However, there are also different arm lengths. There are some "lucky" ones among us who simply sit on the motorcycle and say: "That fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.
Every motorcyclist knows the tension in the body and neck area that arises from tense arm positions during longer rides. This well-known issue among racers is often resolved through surgical intervention. However, one must refrain from riding for 2-3 months afterward.
No one needs to fool themselves: "I’ll just do this today!". You will experience these issues on every ride. As long as you sit tense on the motorcycle, you will not achieve comfort while riding.
We have now solved this problem for motorcycles with handlebars.
With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.
This allows you to achieve a natural ergonomics for a healthier sitting position.
With adjustment times of only about 2 minutes, the handlebars can be quickly adapted to the respective tour. A highway ride with a high handlebar position followed by sporty cornering in the mountains is now no longer an obstacle.
The adapters are equipped with a strong milled knurling on the holding pin. This has achieved an extreme anti-twist protection, which is especially necessary during strong braking maneuvers.
The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.
On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.
(see photo).
The brake line for the BMW R850GS-R1100GS only needs to be routed and does not need to be extended.
Please keep in mind that we cannot check all models. However, you can check on your motorcycle whether the brake and clutch hose is long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not tense or pinched.
All items have been mounted and tested on original motorcycles - without any modifications.
Login