Adjustable handlebar adapter and handlebar riser with 70mm offset ABE for BMW F800ST
Product number:
1008-90000-f800st
Product information "Adjustable handlebar adapter and handlebar riser with 70mm offset ABE for BMW F800ST"
BMW Models - Closer - Higher - Further
The first adjustable handlebar adapter for BMW F800ST
WE SET STANDARDS - Exclusive
incl. ABE
With the adjustable handlebar adapter, we have succeeded in manufacturing an adjustable adapter that fits nearly all series-produced motorcycles with tubular handlebars from 1910 to today and in the future – just like your F800ST.
Tubular handlebars have existed since the inception of series motorcycles. However, different arm lengths do too. There are some "lucky" ones among us who simply sit on the motorcycle and say: "That fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.
Every motorcyclist knows the tension in the body and neck area, and the numbness of the hands, leading to the loss of feeling in the entire arm, caused by tense arm positions during longer rides. We have now solved this problem for motorcycles with tubular handlebars.
With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.
This allows you to achieve a natural ergonomics for a healthier sitting position.
With adjustment times of only about 2 minutes, the handlebar can be quickly adapted to the respective tour. A highway ride with a high handlebar position followed by a sporty twisty ride in the mountains is now no longer an obstacle.
The adapters are equipped with a milled knurling on the holding pin. This has achieved an extremely strong anti-twist protection, which is especially necessary during hard braking maneuvers.
The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.
On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.
(see photo).
For the F800ST, a brake line (EL60D65°D80°) is included in the delivery, for motorcycles with ABS.
Please keep in mind that we cannot test all models. However, you can check on your motorcycle whether the brake and clutch line is long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not taut or pinched.
The first adjustable handlebar adapter for BMW F800ST
WE SET STANDARDS - Exclusive
incl. ABE
With the adjustable handlebar adapter, we have succeeded in manufacturing an adjustable adapter that fits nearly all series-produced motorcycles with tubular handlebars from 1910 to today and in the future – just like your F800ST.
Tubular handlebars have existed since the inception of series motorcycles. However, different arm lengths do too. There are some "lucky" ones among us who simply sit on the motorcycle and say: "That fits!". Many, however, wish for the handlebars to be a little closer or perhaps a bit higher.
Every motorcyclist knows the tension in the body and neck area, and the numbness of the hands, leading to the loss of feeling in the entire arm, caused by tense arm positions during longer rides. We have now solved this problem for motorcycles with tubular handlebars.
With the new development, no wish for adjustability remains unfulfilled. A full 70 mm closer - higher or further adjustment range is now available.
This allows you to achieve a natural ergonomics for a healthier sitting position.
With adjustment times of only about 2 minutes, the handlebar can be quickly adapted to the respective tour. A highway ride with a high handlebar position followed by a sporty twisty ride in the mountains is now no longer an obstacle.
The adapters are equipped with a milled knurling on the holding pin. This has achieved an extremely strong anti-twist protection, which is especially necessary during hard braking maneuvers.
The unsightly appearance of the M8 screws in the clamping blocks has been designed so that they are invisibly installed downwards.
On the handlebar adapter with 22 mm, you can attach a ball for securing your navigation device.
(see photo).
For the F800ST, a brake line (EL60D65°D80°) is included in the delivery, for motorcycles with ABS.
Please keep in mind that we cannot test all models. However, you can check on your motorcycle whether the brake and clutch line is long enough. We would appreciate it if you could share your experience with us. Always ensure that the lines are not taut or pinched.
All items have been mounted and tested on original motorcycles - without any modifications.
| Baugruppe: | Steering |
|---|---|
| Marke: | BMW |
| Modell: | F800ST |
Login