Adjustable Footpeg Lowering Kit 40mm ABE for BMW F800ST / F800GT
Product number:
1008-907228-f800st
Product information "Adjustable Footpeg Lowering Kit 40mm ABE for BMW F800ST / F800GT"
Adjustable Footpeg Lowering Kit for BMW F800ST / F800GT
With the new footpeg adapter, no wish remains unfulfilled.
As diverse as its adjustment options are, so are its applications.
The adapter in its basic form fits 98% of all motorcycle models.
Its adjustability is complemented by a universal adapter for 40 mm lowering. It can be adjusted in increments of 4°. Generally, the basic adapter can be mounted either upwards or downwards.
This allows you to achieve a natural ergonomics and a healthier sitting position.
The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.
After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.
MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.
If needed, you can also order a brake lever or a shift lever cap for your BMW. The brake lever cap does not fit the F800R.
Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just as you do in a car.
Please consider that lowering the footpeg also means less lean angle.
Our recommendation:
If you also have problems with slipping off the smooth peg while riding, you can change the peg and instead install the pegs with rubber pads from the F800S. An additional effect is that the vibrations of the peg are significantly decoupled. However, a disadvantage is that the peg is 15 mm longer.
The advantage of these adapters is that the original footpeg is retained.
With the new footpeg adapter, no wish remains unfulfilled.
As diverse as its adjustment options are, so are its applications.
The adapter in its basic form fits 98% of all motorcycle models.
Its adjustability is complemented by a universal adapter for 40 mm lowering. It can be adjusted in increments of 4°. Generally, the basic adapter can be mounted either upwards or downwards.
This allows you to achieve a natural ergonomics and a healthier sitting position.
The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.
After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.
MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.
If needed, you can also order a brake lever or a shift lever cap for your BMW. The brake lever cap does not fit the F800R.
Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just as you do in a car.
Please consider that lowering the footpeg also means less lean angle.
Our recommendation:
If you also have problems with slipping off the smooth peg while riding, you can change the peg and instead install the pegs with rubber pads from the F800S. An additional effect is that the vibrations of the peg are significantly decoupled. However, a disadvantage is that the peg is 15 mm longer.
The advantage of these adapters is that the original footpeg is retained.
All items have been mounted and tested on original motorcycles - without any modifications.
| Baugruppe: | Footrests / Levers |
|---|---|
| Marke: | BMW |
| Modell: | F800GT, F800ST |
Login
Similar Items
Adjustable passenger footpeg lowering 40mm ABE for BMW F800GT F800R F800S F800ST
€157.38*
Adjustable Passenger Footpeg Lowering for BMW F800GT, F800R, F800S, F800STincluding ABEWith the footpeg adapter, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter lowers the peg of your BMW F800 by 40 mm, higher or further. In general, the base adapter can be mounted upwards or downwards.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, thereby keeping the distance to the shift and brake lever relatively constant.This achieves a natural ergonomics and a healthier sitting position.The passenger even gets the benefit of adjusting the peg upwards.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.In the case of a motorcycle change, the kit can in some cases be easily transferred.Like all adjustable products, the footpeg adapter is characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".The advantage of these adapters is that the original footpeg is retained.Please note, that lowering the footpeg also means less lean angle. But this adapter is adjustable. This way, you can easily find the optimal setting.
All items have been mounted and tested on original motorcycles - without any modifications.
Handlebar Adapter Handlebar Rise 50mm closer ABE for BMW F800GT
From
€161.40*
Superbike Handlebar Adapter and Handlebar Rise with 50mm Offset ABE for F800GT
The handlebar adapter in new design
including brake line extension
The new handlebar adapter for your BMW F800GT improves your seating position by an optimal 50 mm. The handlebar comes 50 mm closer to the rider and about 25 mm higher. You will clearly feel this advantage. No more tense, outstretched arms. You simply sit comfortably on your motorcycle and no longer so close to the tank, which is a great advantage for men. The tingling and numbness in your hands are now a thing of the past.The base adapter is secured with M8 screws and has an elongated hole with a center distance of 36 mm-42 mm.The conversion is quick and easy to implement: Remove the existing handlebar clamps (please ensure that the containers for brake and clutch fluid do not tip over too much!) and insert the lower part of the MV adapter. Now just place the handlebar in the new mounts and secure it with the included handlebar clamps. All necessary screws and an extension adapter for the brake line are included in the conversion kit.
Those who have the original BMW navigation system will need longer screws for the installation of our handlebar adapters. The front screws are replaced, and the original rear screws are used as spacers.Please select when ordering.The adapters are delivered with ABE.All items have been mounted and tested on original motorcycles - without any aftermarket modifications.