JMP Lever Cast Cast levers from JMP match the original part in form and function.They offer a very good price-performance ratio and clean workmanship.

Bleed ScrewTechnical Data:Thread: M8 x 1.25 Length: single with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Guide pin for brake pad JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.          Technical Data:Attachment:   Thread M10 x 1.00 Shaft diameter:   6 mmTotal length:   65 mmShaft length:   48 mm

Guide pin for brake pad JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.    Technical Data:Fastening:   Thread M10 x 1.00 Shaft diameter:   6 mmTotal length:   65 mmShaft length:   48 mm

Guide Pin for Brake Pad JMP Bolt Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel Technical Data:Attachment: Thread M10 x 1.00 Shaft Diameter: 6 mmTotal Length: 65 mmShaft Length: 48 mm

Guide Pin for Brake Pad JMP Bolt Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel  Technical Data:Attachment:   Thread M10 x 1.00 Shaft Diameter:   6 mmTotal Length:   65 mmShaft Length:   48 mm

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.    

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high shine.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.    

Guide pin for brake pad JMP Bolt   Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages:     - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel    Technical Data:Mounting:   Thread M10 x 1.00 Shaft Diameter:   6 mmTotal Length:   65 mmShaft Length:   48 mm

Vent Screw JMP - With cap- Material: Zinc-coated steel- Thread: M8X1.25- Total length: 27 mm

JMP Sponge / Grid Insert for BMW Brake Fluid Reservoir   After any work that affects the fluid level in the front brake circuit (e.g., replacing brake pads or changing brake fluid), the grid insert in the front brake fluid reservoir must be replaced.

CC Carbon Ceramic Scooter Brake Pads for Front or Rear An organic brake pad for scooters that offers an optimal quality-to-price ratio. A pad that is characterized by its durability and optimal performance under all conditions, making it ideal for commuter, leisure, or cargo scooters.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   270 mmInner Diameter:   150 mmBolt Circle:   175 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   solid Manufacturer:   Brembo

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

SR Sintermetall Racing Brake Pad for Front This is a material that remains very stable under all operating conditions. With high braking performance in hot conditions and a good coefficient of friction in cold conditions, it is also suitable for fast road use, making it ideal for motorcycles that are used both on the road and on the racetrack.

EBC Standard Semi-Sintered Metal Brake Pads (V-Series) The EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are organic aramid brake pads with a 30% copper content, designed for cruisers, big twins, and touring bikes. These pads are 6 times stronger than steel and are completely asbestos-free. The medium to high friction coefficient ensures strong braking power across a wide temperature range. The high braking force results in minimal wear on both the brake pad and the brake disc. EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are TÜV certified and come with an ABE!

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Brake Light Switch Original Spare Part

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

Brake Light Switch Original Spare Part

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.