JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

Copper sealing ring JMP- 10.0X15.0X1.0     Technical Data: Range :   No Inner diameter :   10 mm Outer diameter :   15 mm Height :   1 mm Material :   Copper Design :   Flat Gasoline resistant :   Yes Oil resistant :   Yes  

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength- outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Type:   Oil Drain Plugs Thread:   M16 x 1.5 Diameter:   16 mmLength:   10 mmHead:   Hexagon Head Drive:   Hexagon Surface:   blue anodized Material:   Titanium Color:   blue Grade:   No grade class O-ring/Washers:   None Manufacturer:   JMP Bolt Special Feature:   Holes for safety wire    magnetic For Safety Wire:   Yes Technical Data:Thread:   M16 x 1.5 Length:   10 mmHead:   Round Head with Internal Hexagon Wrench Size:   8 mm Material:   Titanium Color:   blue For Safety Wire:   No O-ring/Washers:   Yes Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft-grade titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength- outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Type:   Oil Drain Plugs Thread:   M16 x 1.5 Diameter:   16 mmLength:   10 mmHead:   Hexagon Head Drive:   Hexagon Surface:   silver anodized Material:   Titanium Color:   titanium gray Grade:   No grade class O-ring/Washers:   None Manufacturer:   JMP Bolt Special Feature:   Holes for safety wire    magnetic For Safety Wire:   Yes Technical Data:Thread:   M16 x 1.5 Length:   10 mmHead:   Round Head with Internal Hexagon Wrench Size:   8 mm Material:   Titanium Color:   silver For Safety Wire:   No O-ring/Washers:   Yes magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength- outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Type:   Oil Drain Plugs Thread:   M16 x 1.5 Diameter:   16 mmLength:   10 mmHead:   Hexagon Head Drive:   Hexagon Surface:   gold anodized Material:   Titanium Color:   gold Grade:   No grade class O-ring/Washers:   None Manufacturer:   JMP Bolt Special Feature:   Holes for safety wire    magnetic For Safety Wire:   Yes Technical Data:Thread:   M16 x 1.5 Length:   10 mmHead:   Round Head with Internal Hexagon Wrench Size:   8 mm Material:   Titanium Color:   gold For Safety Wire:   No O-ring/Washers:   Yes magnetic:   Yes

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

Valve Shim Set 10 MM Prox valve shims are made from high-quality materials. Due to the specific heat treatment, the hardness of the shims is ensured, providing maximum hardness and reduced wear. All shims are precision-manufactured, ensuring a perfect fit. Contents (3 pieces each) of sizes 1.85 to 3.20: 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 Technical Data:Diameter: 10 mmThickness: set mm

Thermostat Original spare part