TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm            

6ON Replacement Two-Wheeler Tool Set, 5-piece Contents: 1 Open-end Wrench SW 8 x 10 mm 1 Open-end Wrench SW 12 x 14 mm Small Combination Pliers Interchangeable Screwdriver Flat / Phillips Spark Plug Wrench 3 in 1 with Handle, 16, 18, and 21mm

Brake Caliper Piston Reset Tool for BMW   The brake caliper piston reset tool is suitable for all fixed calipers of all model years, where the reset tool fits due to its design.   The set consists of:   2x Reset Plates 2x 8MM Adapters 2x 9MM Adapters 1x 7.5MM Adapter 1x 11MM Adapter 2x Fixing Pieces

JMP Brake Fluid Filler For filling the ABS unit without introducing air into the system Filling capacity: 500ml Suitable for BMW models with Integral ABS

The laser light is visible in a line along the entire length of the chain, allowing for easy and quick visualization. For belt drive systems, two belt markers (included in the delivery) are attached to the belt. The SE-CAT-Line is ideally suited for this application, as both belt markers can be illuminated simultaneously, making it clear whether the rear axle is correctly positioned. Application errors are nearly impossible.The chain alignment can be adjusted in seconds using the precise testing device. It only needs to be checked whether the light line illuminates the same distance from the edge of the chain along the entire length.The precisely adjusted rear wheel ensures optimal handling.     Scope of delivery: 1 x Chain alignment testing device with line laser 1 x Film pouch 1 x Battery pack (3 AG5 in insulating sleeve) 4 belt markers 1 x Plastic-free packaging and storage box        

JMP Chain Gauge For determining the pitch of drive chains

JMP Universal Chain Breaker and Riveting Tool for Hollow Rivets Solid professional tool for work on the vehicle With chain roller holder, preventing the chain from slipping during breaking or riveting Only one tool needed for the most common chain sizes Suitable for chains of sizes 420, 428, 520, 525, 530, and 532 Note: To correctly press the chain link for JT chains in conjunction with hollow rivet locks, please use the pressing plates for clip locks. It is essential to ensure that the links are not pressed too tightly. Consists of: Chain breaker and riveting tool Upper pressing plate for 428 clip lock Upper pressing plate for 428 rivet lock Upper pressing plate for 520 clip lock Upper pressing plate for 520 rivet lock Upper pressing plate for 530 clip lock Upper pressing plate for 530 rivet lock Lower pressing plate Chain roller holder for 420 and 428 chains Chain roller holder for 520, 525, 530, and 532 chains Rivet head for 420 and 428 chains Rivet head for 520, 525, 530, and 532 chains Counter plate Screw for lower pressing plate Separation pin for 420 and 428 chains Separation pin for 520, 525, 530, 532, and 630 chains

Transform a ratchet into a torque wrench and/or calibrate your torque wrench!Details, torque range & tolerance:• Range: 4-203 Nm• Tolerance: ± 2%• Size: 3/8 "Dr. & 1/4" adapter (3/8 "F x 1/4" M)• Units of measurement: kg-cm, kg-m, in-lb, ft-lb, n-m• 10 memory settings• LED screen illumination• Adapter: 50 x 50 x 76 mmL• Box: 120.5 x 60 x 180 mmL• Works in both clockwise and counterclockwise directionsFor more user-friendliness:• The screen can be rotated 240° for easier reading• Acoustic signal starting at 30% before reaching the set limit, with a constant tone upon reaching and exceeding the limit

Diagnostic device for motor vehicles and motorcycles. A diagnostic system with an intuitive and easy-to-understand user interface in 10 languages. The simple symbol-based menu structure helps the user complete their tasks quickly and reliably. With extensive functions and special features, the user has access to a unique diagnostic system. The diagnostic device is indispensable in a modern automotive/motorcycle workshop.Supported control units:Engine electronics / Engine control unit CDICentral electronics / Chassis electronics BCMInstrument cluster / SpeedometerTire pressure monitoring RDKSABS – Anti-lock braking systemTheft warning system / Alarm systemRadio / MultimediaRadio control unitElectric hydraulic tilt standBattery management system BMSIntegrated power supply control module ICSMElectric power steering EPSElectronic throttle control EPTExhaust flap control FCEKeyless GO systemLED headlightsAutomatic transmission / Transmission controlTraction controlAirbagDiagnostic functions / Diagnostic capabilities:Service reset / Service Reset / DESMO / OilRead and clear complete fault memoryKey programmingAdjust fuel injection systemUnlock immobilizerAdjust / Adapt throttle valveSet date and time, e.g., after battery replacementReset adaptation valuesSpecific actual/target values / Live DataRead current mileage and softwareRead chassis numberValve clearance service resetBleed ABS pressure modulator / Bleeding test from the ABS hydraulic systemInitialize brake wear indicatorCalibrate windscreenESA/SAF shock absorber calibrationStepper adjustmentCalibration: height sensor, windscreen, idle actuator, film sensor, etc…Sensor adjustment, e.g., exhaust flap, interference pipe flap, reverse assistance adjustment, speed sensor, transmission, idle actuator, lambda sensors, etc.Actuator diagnosis, e.g., fan, fuel injector, valvesTire pressure sensor RDC learning – programming – initializingNo limitations or restrictions on modelsTechnical specifications:3.5-inch IPS color display with high resolutionRobust housing with ergonomic gripsGraphical user interface with clear symbolsElongated metal dome buttons on membrane keyboardRubber-protected housingOperation without battery, power supplied by the machineUpdate via USB-C standard cableSoftware updates occur automatically via Windows softwareDimensions L/W/H 17x11x4cm Weight 300gSpecial functions: *Service reset date / mileageSet date and time, e.g., after battery replacement Reset adaptation values for the engine control unitSpecific actual valuesRead current mileageRead chassis numberValve clearance service resetBleed ABS pressure modulatorCalibrate idle actuatorInitialize brake wear indicatorCalibrate windscreenESA/SAF calibrationStepper adjustmentCalibration: height sensor, windscreen, idle actuator, film sensor, etc…Sensor adjustment: exhaust flap, interference pipe flap, reverse assistance adjustment, speed sensor, transmission, idle actuator, lambda sensors. Actuator diagnosisNo limitations or restrictions on models*(These functions are not available for all models, engine variants, and control units.)Supported protocols:KWP-2000 SpecificCAN-BUS SpecificUDS SpecificWhich models are supported?All models from Euro 4 are equipped with the OBD-2 connector at BMW. Approximately from 08.2016M1000RRS1000RRR1250RSK1600GTK1600GTLK1600BK1600 Grand AmericaR1250 RTS1000RR1250RF900RG310RR18R nineT / Pure / Urban ScramblerR1250GSS1000XRF900XR F850GSF750GSG310GSC400Supported control units:Engine electronics from Motronic 2.4Central electronicsInstrument clusterTire pressure monitoring ABS anti-lock braking system from I-ABSTheft warning system RadioFunction satelliteActive headlightsESA electric shock absorber adjustmentSAF semi-active suspensionAccess systemTelematics moduleAudio platformBody controllerSideview assistChassis electronicsElectric hydraulic tilt standsScope of delivery:Diagnostic device including 1 license for BMW, OBD-2 diagnostic cable, manual, and bag.

With the combination of hardware and software GS-911, you can safely and reliably read the control units of almost all BMW motorcycles as well as some Husqvarna motorcycles. Initially started as a pure emergency tool for the GS series, today both the software and the interfaces have all the functions necessary for maintenance and service work. Since the GS-911 interfaces are not only small but also lightweight, they can be easily taken on trips.Enthusiast VersionWith this version, you can diagnose up to 10 motorcycles with 10 different VINs. This cost-effective version is particularly suitable for beginners or hobby users.The GS-911 WIFI OBD2 is compatible not only with BMW models with OBD2 connection but also with older models. The interface transmits vehicle data over a Wi-Fi network to the corresponding GS-911 PC software, providing you with a new dimension of range and comfort. Additionally, it is equipped with a USB port, allowing you to connect it to your PC using the included cable.For mobile use, the GS-911wifi App offers a browser-based option. This allows the use of all iOS and Android smartphones as well as tablets that have a Wi-Fi connection and an internet browser.The connection to BMW motorcycles with a 10-pin socket is only possible with an adapter.Functions- The EMERGENCY functions are directly integrated into the interface and are therefore available via the PC software and the mobile app. They allow you to read and clear error codes from all control units. Additionally, you can display information about the engine control unit as well as its real-time sensor data.- With the SERVICE functions, you have the ability to perform service resets, calibrations, and adjustments. You can also conduct output function tests and ABS bleeding tests. These applications are primarily usable via the PC software.- The CLOUD functionality allows a mobile device equipped with a modern browser and connected to the HEX Cloud Server to access the SERVICE functions.- Free UPDATES are available on the manufacturer's download page free of charge for an indefinite period, but at least 12 months from the date of purchase. They include new features, additional motorcycle models, and bug fixes.Technical DataSoftware and Storage Space: GS-911 PC software for Windows (at least 10 MB) or GS-911wifi App for Android and iOS (at least 4 MB)Connection: USB or Wi-FiUSB Connection: Type BPower Supply: USB and/or 12 V power supply via vehicle interfaceScope of Delivery- GS-911 WIFI OBD2 Interface (Enthusiast Version)- USB connection cable- Quick Start Guide- Sturdy protective caseSupported BMW ModelsR-SERIES- HP2 Enduro, HP2 Megamoto, R1200GS, R1200GS Adventure, R1200RT, R1200R, R1200ST, R1200S, HP2 Sport (R1200S), R nineT (2014 - 2016)- R1200C, R1200CL (Single and Twin Cylinder)- R1150GS/Adventure, R1150RT, R1150R, R1150RS (Single and Twin Cylinder)- R1100S (Single and Twin Cylinder)- R900RT, R850C, R850R, R850RTG-SERIES- G650 XChallenge, G650 XCountry, G650 XMoto- G650GS, G650GS Sertao- G450XK-SERIES- K1300GT, K1300R, K1300S- K1200GT, K1200R, K1200R Sport, K1200S, K1200LT, K1200GT (not CAN), K1200RSS-SERIES- S1000RR, S1000RR HP4F-SERIES- F800GS Adventure, F800GT, F700GS, F800S, F800ST, F800GS, F800R- F650GS 2008 - 2013 (Twin Cylinder)- F650GS, F650GS/Dakar, F650CS (Single Cylinder)- F650GS, F650GS/Dakar, F650CS (Twin Cylinder)C-SERIES- C600 Sport, C650GT, C1-125, C1-200BMW K001-CHASSISR-SERIES- R1200GS LC (K50), R1200GS Adventure LC (K51), R1200RT LC (K52), R1200R LC (K53), R1200RS LC (K54)- R nineT (K21) 2017+, R nineT Pure (K22), R nineT Scrambler (K23), R nineT Racer (K32), R nineT Urban G/S (K33)S-SERIES- S1000R (K47), S1000RR (K46) 2015+, S1000XR (K49)K-SERIES- K1600GT (K48), K1600GTL (K48), K1600GTL Exclusive (K48), K1600 Bagger (K61)C-SERIES- C650 Sport (K18A) 2016+, C650GT (K19A) 2016+- C-evolution (K17)F-SERIES- F800GS 2016+

JMP Ignition Lock Tool For disassembling the ignition lock. - Diameter in mm: 1.2 Compatible with BMW models

Fixing Piece Set Spare part for BMW brake caliper retractor

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

The lightweight, compact first aid kit from BMW Motorrad fits into any motorcycle and contains a basic supply for treating minor injuries. In addition to a variety of band-aids and disposable gloves, it also includes skin cleansing wipes, a quick bandage, and a rescue blanket in a water-repellent nylon bag. Its signal red color makes the first aid kit highly visible, ensuring it is quickly accessible in case of an emergency. A truly helpful companion that fits in any Flexcase and should not be missing from any motorcycle. Basic supply for minor injuries. Water-repellent zippered nylon case. Contents: Variety of band-aids Quick bandage (size 2) Skin cleansing wipes Disposable gloves Rescue blanket

Thanks to its compact pocket format, this practical multitool fits in any motorcycle and replaces 40 full-fledged tools, allowing you to perform almost all simple maintenance and care tasks as well as ergonomic adjustments on the motorcycle. Its high-quality lightweight construction made of stainless steel makes the multifunctional tool light, handy, and particularly user-friendly. An indispensable companion that should not be missing from any motorcycle – and it can also be worn on the belt in the included black leather case. Lightweight, compact multifunctional tool. High-quality construction made of stainless steel. Black leather case with BMW logo included. Dimensions (L/H): 115 mm / 46 mm. Weight: 372 g. Scope of delivery: Includes practical black leather case with BMW logo.

Reliable Weather Protection: The outdoor cover protects the vehicle from moisture, dirt, and other environmental influences even when exposed to the elements. The high-quality nylon cover is waterproof and features ventilation openings as well as a large viewing window in the license plate area. Drawstrings ensure optimal fixation of the cover to the vehicle, and the two metal eyelets at the front can be used for theft protection. Additionally, the integrated pocket is practical for storing the cover when not in use. The black cover is adorned with a large silver BMW Motorrad logo and is suitable for many BMW motorcycles. Reliable weather protection. Practical handling. Material: Nylon with waterproof PU coating

Digital pocket scale with blue LCD touchscreen to determine the weight of unmarked variator rollers.Essential for tuning the variomatic on any scooter or quad with CVT (continuously variable transmission) drive. The scale measures with an accuracy of 0.01 grams up to a maximum of 100 grams. A calibration weight is included for precise calibration of the scale. Also included are 2x1.5V batteries (LR03; AAA) and a leather protective case.

ALCAR TECH350 Service Device Tire Pressure Monitoring System (TPMS) Motorcycle Professional diagnosis of motorcycle OE sensors Reading, programming, and cloning of Alcar sensors 2.8-inch color display OBD II module included 3 years software license included Blind sensor detection (especially useful on complete wheels) 20+ languages installed Reference article for all OE and ALCAR sensors including OE part numbers Training and learning information available directly on the device Remote key test in the device Technical specifications: High-resolution 2.8-inch color display 2.3 Ah LiPo battery Dimensions (LxWxH) 204x800x35 mm Weight 380 g Scope of delivery: Device TECH350 USB cable OBD cable          

The professional motorcycle tool for BMW motorcycles for on-the-go and for the workshop at home. Whether on a long motorcycle journey or a short ride, this 70-piece motorcycle tool kit allows you to perform necessary tasks at any time.The sturdy double-layer roll bag, weighing only 2.5 kg, comes with a professional motorcycle tool set made from the best materials: the S2 bits with black phosphate rust protection. The sockets and wrenches are Cr-V satin chrome plated. With its compact dimensions, this motorcycle tool bag in Touratech design always finds a place on your bike.Touratech professional tool set for BMW motorcycles, 70 pieces, includes: • 3-in-1 multifunction tool: T-handle - 1/4" hex bit ratchet - 11 mm ratchet• Extension "Turbo Sleeve" for 1/4" hex bit ratchet• Socket adapter 6mm square to 1/4"• 13mm ratchet wrench (ring/open-end wrench)• Socket adapter 13mm to 3/8"• Bit set internal hex T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, Phillips PH3, slotted 5mm (drive: 1/4" = 6.35mm, length: 25 mm)• Bit set internal hex H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, Phillips PH2 (drive: 1/4" = 6.35mm, length: 25 mm)• Socket WITH: 6 mm (1/4, E8) with drive: 1/4" = 6.35mm• Socket WITH: 8 mm (5/16, E10)• Socket WITH: 10 mm (3/8, E12)• Socket WITH: 11 mm (7/16, E14)• Socket WITH: 12 mm (15/32, -)• Socket WITH: 13 mm (1/2, -)• Socket WITH: 14 mm (9/16, E18)• Socket WITH: 15 mm (19/32, -)• Socket WITH: 17 mm (11/16, -)• Socket holder (7 x 1/4" & 2 x 3/8")• 8 mm ring/open-end wrench, WITH on the ring side• 10 mm ring/open-end wrench, WITH on the ring side• 12 mm ring/open-end wrench, WITH on the ring side• 14 mm ring/open-end wrench, WITH on the ring side• 16 mm ring/open-end wrench, WITH on the ring side• Small tire pressure gauge up to 3.5 Bar (kg) or 50 psi• Locking pliers, 169 mm long• 10x cable ties, 100 mm long• 14 mm spark plug socket 3/8"• 16 mm spark plug socket 3/8"• Poplock extension 3/8" with 16 mm external hex, 125 mm long• Axle tool (17-22 mm / 24-19 mm) with internal hex for attachment to a 3/8" ratchet• BMW spark plug socket• 3/8" 72-Tooth Super Light Matt Finishing Ratchet• Socket: T55 internal hex, length: 50mm• 1/4" bits: T9, T15, T25, slotted2 (50mm length)• 3/8″ 12mm internal hex insert• 17 mm open-end wrench, WITH on the ring side• Socket: T50 internal hex• Socket: T60 internal hex• High-quality roll bag in Touratech design (210 Den nylon bag, 19 x 38 cm)Weight: 2.5 kgDimensions open: W 49 cm x H 26.5 cmDimensions rolled up: Ø 10 x H 26.5cm