Universal programmable TPMS sensor, can be programmed via the diagnostic tool TECH350 (under accessories) or, even better, a clone of the OE sensor can be created. Valve diameter 11.5mm The battery life corresponds to the OE sensor and lasts at least 5 years

JMP Lever Cast Cast levers from JMP match the original part in form and function.They offer a very good price-performance ratio and clean workmanship.

JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6204 Inner diameter:   20.00 mmOuter diameter:   47.00 mmWidth:   14.00 mmSealing:   2 sealing discs Bearing clearance:   Standard

JMP Valve Caps   - made from CNC machined aluminum - black anodized - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

BMW Keychain

EBC SFA HH Scooter Sintered Brake Pads   State-of-the-art sintered metal technology for larger and faster scooters.   Advantages at a glance: - Long lifespan due to the material composition - High-quality production in our own facility - High HH friction - Suitable for high speeds

EBC Scooter Brake Pads Organicin premium quality, specially manufactured for scooters. These brake pads offer a long lifespan as well as good braking performance.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

SV - Friction MaterialFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Only suitable for the front axle.

SH - Friction MaterialFull metallic sintered material with special coating.High friction coefficient, guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Tuned to the friction coefficient of the SV material.Only suitable for the rear axle.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

Accossato Cast Lever   The cast levers from Accossato match the original part in form and function.   Accossato is an Italian brand known from the Superbike, Moto 2, Moto 3, and AMA championships. Spare parts from this brand are correspondingly high quality. Many renowned manufacturers have their products made by Accossato.   The brand has, for example, a 20-year collaboration with Aprilia.

TRW-Lucas EC Scooter Brake Pad   - organic pad - good price/performance ratio - European production - with ABE

Scooter Carbon Brake Pads SFAC - suitable for all brake discs - no damage to the brake disc - longer lifespan due to carbon granulate - good and even braking performance through the use of copper powder - TÜV certified

EBC Organic Brake Pads in premium quality, specially manufactured for scooters. These brake pads offer a long lifespan as well as good braking performance.

JMP Reminder Cable for Disc Lock The spiral cable is attached to the lock and the handlebar.An affordable investment to avoid costly damage from forgotten disc locks. Dimensions: 4mm diameter, 1530mm lengthColor: neon yellow 

JMP Bolt Valve Cap With these pretty little tire valve covers, dirt stays out and an airtight seal is ensured. Universally suitable for cars and motorcycles.   Material: Anodized aluminum in color

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm