Machined aluminum body, adjustable spring preload and rebound (30 clicks). The locking of the spring preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The preload is locked using a set screw.   The adjustment tool is included in the delivery.

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

Ball Bearing

Progressive Springs for Fork and Shock Absorber for BMW R 65, R 65, RT, R 80, R 80 RT, R 100 RS, R 100 RT 1985 - 1995 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Fehling Touring Handlebar Type: LN 22   - made of chrome-plated steel tube - tube diameter 22 mm (7/8") - without cable drilling - with TÜV certificate   - compatible with BMW R 80 G/S, R 80 RT/ST, R 100 RT   Fehling has been manufacturing accessories for motorcycles and large scooters since the 1950s. From development to production, top quality according to ISO 9001 and Made in Germany.   Dimensions: a: 710 mm b: 200 mm c: 135 mm d: 260 mm e: 180 mm Technical Data:Diameter:   22.2 mm (7/8 inch) Type:   Touring Material:   Steel Width:   710 mmColor:   chrome Special Feature:   no special feature Manufacturer:   Fehling

JMP Connector Sheet Nut Suitable for the following vehicles: Mercedes-Benz: MB 100, 190 W201, CL C215, C-Class W204, E-Class W110 + W111 + W114 + W115 + W120 + W210 + W212, G-Class W461, ML W164, S-Class W112 + W116 + W140, R-Class W251, SL R107 + R129, SLK R170 + R171, Vito W628 + W629, Sprinter 901/902/903/904/906 Maybach: 57, 62 Key size: 3 - 4 mmWidth [mm]: 11 mmLength [mm]: 15.5 mm for screw diameter: 4.2 mmWeight [g]: 1 g Contents: 10 Packaging unit: 1 Technical Data:For screw Ø: 4.20 mmFor thread size: No metric thread Shape: open Self-locking: No Surface: galvanized Material: Steel

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   36 mmInner diameter:   28 mmLength:   614 mmTop connection:   Internal thread Bottom connection:   No thread Thread:   30 x 1.5 Color:   chrome

  Drive Shaft Bolt Total Length: 20mm Thread Length: 12.5mmTechnical Data:Type:   Threaded Bolts Thread:   M8 x 1.0 Diameter:   8 mmLength:   12.5 mmHead:   External Torx Drive:   External Torx Surface:   Blackened Color:   Black Manufacturer:   Other Special Feature:   With Washer For Safety Wire:   No

  Oil SealTechnical Data:Inner Diameter:   28 mmOuter Diameter:   55 mmWidth:   9 mm

Spacer ring for center stand   Stainless steel  

Swingarm Cap

Swingarm Bearings

Progressive Springs for Fork and Shock Absorber for BMW R 65 RT, R 80 RT, R 100 RS, R 100 RT 1985 - 1995 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Black-T E1 Mono Shock Absorber for for BMW R 100 RT 1987-1995R 100 RS 1985-1993R 80 RT 1984-1995R 80 1984-1995R 65 RT 1985-1988R 65 1985-1993The E1 product line from Black-T Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the respective motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of ride dynamics, safety, and precision. The Facts: - Black-T shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Black-T E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal ride dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

Vehicle-Specific Information:  20 mm lowerMachined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The preload is locked using a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.Technical Data:Type:   Gas pressure Top Mounting:   Eye Inner Diameter of Eye:   15.1 mmLength:   390 mmBottom Mounting:   Eye Inner Diameter of Eye:   15.1 mmAdjustment Options:   Preload continuously adjustable    Length adjustable +/- 5 mm    Rebound Spring Color:   black Spring Rate:   80 Spring Length:   200 mmSpring Diameter:   46 mmReservoir:   No Manufacturer:   YSS Piston Diameter:   36 mmPiston Rod Diameter:   16 mm

Vehicle-Specific Information:  10 mm higherMachined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The preload locking is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.