BATTERY HOLDER "UNDERENGINE S1" A solution for all those who no longer want their large battery in plain sight. The suspension of the battery box is done at the rear axle of the engine mount. Additionally, 2 rubber buffers serve as supports to brace the battery box against the oil pan. 2 rubber grommets are used for cable routing. 2 tension springs hold the lid. Easy installation. Universal mounting materials included in the delivery .Important notes: Main stand must be removed Specifically designed for small batteries, e.g.: cs-batteries Batteries must be insulated by the customer (rubber mats) Material: 1.4301 (stainless steel) surface shot-blasted Width (internal measurement) 179 mm Height (internal measurement) 83 mm Depth (internal measurement) 98 mm Larger battery boxes available upon request!BATTERY HOLDER "UNDERENGINE S1" Stainless steel shot-blasted for BMW 2-valve boxer /5- /6 - /7 R 45, R 65, R 65LS `78 - `84 R 65, R 80, R 80RT, R 100 RS, RT - All Monolever models from `85 R80G/S, R80ST, R80GS, R100 GS, R80R / 100R and Mystik

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Machined aluminum body, adjustable spring preload and rebound (30 clicks). The locking of the spring preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The preload is locked using a set screw.   The adjustment tool is included in the delivery.

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

Elring Aluminum Seal Ring DIN/ISO: 7603 Shape: A-Form Material: Aluminum Thickness/Strength [mm]: 1.5 mm Outer Diameter [mm]: 22 mm Inner Diameter [mm]: 18 mm Packaging unit 100 (Price per piece packaging unit = Minimum order quantity) used among others for oil drain plugs in vehicles: BMW (G30, F90, G11, G12, G05, G15, G06) BMW MOTORCYCLES Technical Data:Range: No Inner Diameter: 18 mmOuter Diameter: 22 mmHeight: 1.5 mmMaterial: Aluminum Design: A-Form Gasoline Resistant: Yes Oil Resistant: Yes

The Arizona touring screen is an extra tall touring screen.

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 41 mm

Ball Bearing

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery Strap Total Length: 200 mm

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6005 Inner diameter:   25.00 mmOuter diameter:   47.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

BMW Keychain

Progressive Springs for Fork and Shock Absorber for BMW R 65, R 65, RT, R 80, R 80 RT, R 100 RS, R 100 RT 1985 - 1995 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

BMW 38mm Stainless Steel Header Set WITHOUT Interference Pipe for R 80, R 80RT, R 100 RS, R100 RT Monolever Models from '85 HATTECH STAINLESS STEEL - Polished header system with 38mm header diameter HATTECH STAINLESS STEEL 38mm Header suitable for models WITH and WITHOUT oil cooler no additional modifications necessary WITHOUT Interference Pipe with cutout for oil thermostat Available in various surface options:              untreated / uncut surface               brushed              polished              brushed & heat-colored at the welds

BMW K1100 Radio Grundig Europa 65142304504 Spare Part Dispenser This is a used part being offered Vehicle: K1100LT Manufacturer: BMW Condition: noticeable signs of wear Description: sold as shown, scratches and abrasions, 1 crack in the housing, functionality not tested, no code available, cable cut, no key for the radio compartment BMW Part Number: 65 14 2 304 504

The innovative tank bag mounting system - Fidlock patented This solid tank ring allows for the attachment of a Lock-it tank bag from Hepco&Becker.Included in the delivery is a Lock-it tank ring, as well as the counter holder, which can be individually screwed onto the tank bag depending on the tank shape and handlebar angle.The fuel cap can still be opened without any problems with the tank ring mounted.In general, you only need this tank ring and a tank bag from H&B, and you have everything you need.Each model-specific tank ring is usually available for the respective motorcycle model. If no tank ring is available, these universal tank rings can help. You can find the suitable tank ring by measuring various dimensions using the checklist here in the shop. FEATURES: absolutely secure hold, even at high speeds mechanical/magnetic locking easy operation the tank bag is simply inserted and locks automatically with an audible click thanks to the magnets Unlocking: The mechanism is unlocked by a strap in the forward direction on the tank bag; the tank bag is simply removed simple yet effective mechanics Fidlock patented shielded magnetic field, safe for credit cards and electronic devices Recommended maximum speed with mounted tank bag: 130 km/h (Please observe the motorcycle manufacturer's specifications, as well as the model-specific information in the manual or here with the product) Recommended load in the tank bag: approx. 3kg

Product Description: original BMW workshop equipment high-performance surface sealant, thermally resistant, standard strength recommended by BMW! For all surface and flange seals in the engine, transmission, and drive area e.g. cylinder base gasket R1200 GS RT R..... Contents 35 ml 99.83 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For commercial users / professionals only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)