Washer M10X1.0X14MM   Original spare part Technical Data: Type :   Washer Inner Diameter :   10.2 mm Outer Diameter :   14.0 mm Thickness :   1.00 mm Design :   flat Material :   Stainless Steel

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Clutch Switch Original Spare Part

Endless Timing Chain- Manufactured by Borg Warner Morse- OEM quality

The two-part engine protection bar made of matte blasted stainless steel protects the engine housing from damage and perfectly integrates into the elegant overall concept of the motorcycle. Stable tube construction made of matte blasted stainless steel. Includes installation instructions. Weight: approx. 1.9 kg. Additional Information Includes mounting materials

Timing Chain Tensioner Gasket Original Spare Part

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Set

Water pump cover gasket O-ring set Original spare part

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

The two-part, robust engine protection bar made of matte blasted stainless steel protects the engine housing from major damage and perfectly integrates into the elegant overall concept. 2-part, robust engine protection bar made of electropolished stainless steel Elegant, matte blasted surface Protects the engine housing from damage and reduces consequential damage Weight: approx. 1.9 kg (both sides including mounting parts)

The two-part, robust engine protection bar made of matte blasted stainless steel protects the engine housing from major damage and perfectly integrates into the elegant overall concept. 2-part, robust engine protection bar made of electropolished stainless steel Elegant, matte blasted surface Protects the engine housing from damage and reduces consequential damage Weight: approx. 1.9 kg (both sides including mounting parts)

Bolt

  Valve Cover Gasket   Original Spare Part