Sinter Carbon Racing   - High-performance racing compound - Meets the highest demands of professional racers - Excellent durability even under the most extreme conditions with extremely high friction values - SCR pads are also suitable for use in endurance races. - The use of SCR pads is recommended exclusively under professional racing conditions.   The SCR pads do not have ABE

EBC GPFAX Formula Sintered Race Brake Pads - Perfect for Racing!   The new GPFAX Formula Sintered Race Brake Pads replace the GPFA series.State-of-the-art sintered metal technology. The goal of the GPFAX pads is to surpass the Brembo Z04 pads, which they achieve more than well.   The new material features an optimal heat cycle, feels better at the brake lever, and ensures quick bedding-in.GPFAX pads are suitable exclusively for the racetrack, not for the street (street machines).They provide the most uncompromising solution for racing machines.   The material contains no toxic substances such as lead, nickel, or zinc.   The GPFAX Formula Sintered Race Brake Pads are not TÜV certified and are only suitable for the racetrack!

EBC HPSR Brake Disc, rigid design. MADE IN UK.The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the break-in process. Only in this area can light surface rust form after prolonged periods of inactivity. The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear. - Brake ring machined from forged HPSR steel with low carbon content.- Therefore, no warping of the brake disc even under maximum load.- No glazing of the braking surface, thus the coefficient of friction remains constant.- Braking surface drilled with optimized hole pattern.- Galvanized for protection against corrosion.- Minimal manufacturing tolerances.- EBC recommends EBC Double-H sintered brake pads for best braking performance.- Independent design.Technical Data:Outer Diameter: 320 mmInner Diameter: 108.5 mmBolt Circle: 203.4 mmNumber of Holes: 5 Hole Diameter: 16.7x14 mmThickness: 4.5 mmDesign: rigid Manufacturer: EBC

Guide Pin for Brake Pad JMP Bolt Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel  Technical Data:Fastening:   1 Cotter Pin Shaft Diameter:   5 mmTotal Length:   53 mmShaft Length:   45 mmLength from Head to Cotter Pin:   8 mm

  Spring for guide pin   Original spare part

Guide Pin for Brake Pad JMP Bolt Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel Technical Data:Fastening: 1 Cotter Pin Shaft Diameter: 5 mmTotal Length: 53 mmShaft Length: 45 mmLength from Head to Cotter Pin: 8 mm

Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids - black anodized Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

ABS Sensor (Wheel Speed Sensor) Bosch   - Original Equipment Manufacturer quality - Cable length: 1236 mm

Stahlbus Bleed Valve M8 x 1.25 (max. screw-in length 16mm) Innovative quick-bleed screw for safe, clean, and fast bleeding and filling of hydraulic brakes and clutches on all motor vehicles. One-handed operation without external assistance. Especially suitable when replacing rubber lines with steel braided lines. CNC precision turned part made of nickel-plated steel to replace the conventional bleed nipple. Colored cap is not included in the delivery - available as an accessory.

Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids The offered stainless steel screws are all polished to a high gloss. Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids - black anodized Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

JMP Brake Disc Bolt Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel

EBC Standard Semi-Sintered Metal Brake Pads (V-Series) The EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are organic aramid brake pads with a 30% copper content, designed for cruisers, big twins, and touring bikes. These pads are 6 times stronger than steel and are completely asbestos-free. The medium to high friction coefficient ensures strong braking power across a wide temperature range. The high braking force results in minimal wear on both the brake pad and the brake disc. EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are TÜV certified and come with an ABE!

EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with the highest braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Standard Pad Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

SV - Friction MaterialFull metallic sintered material with special coating.High friction coefficient ensures very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for motorsport, as it has no heat resistance above 400 degrees.Only suitable for the front axle.

  EBC Extreme Pro - Perfect for the street and for racing!   State-of-the-art sintered metal technology is now available for all newer sport bikes and street racing machines from the EBC high-tech facility in Cleveland, Ohio.   The new Extreme Pro brake pad has been tested on the dyno, on the racetrack, and on the street, and it was used in the 2008 Daytona 200 races by 8 of the top 20 riders. The new material features an optimal heat cycle, feels better at the brake lever, and ensures quick bedding-in.   Extreme Pro brake pads are ideal for fast street and racing machines,

- CRQ - Friction Compound- Racing compound based on carbon- For track use only- Higher durability than SRQ- Lower hand force and good cold bite value- Suitable for high-performance applications

BMW Original Rear Brake Disc NEW Item Description This offer includes 1 rear brake disc . This offer applies to the item in the red marked circle!!! ( Image No. 1 ) BMW Part Number: 34217664102 Fits according to part number for the following vehicles: R 1200 GS 04 R 1200 GS 08 R 1200 GS 10 R 1200 GS Adventure 06 R 1200 GS Adventure 08 R 1200 GS Adventure 10 HP2 Enduro HP2 Megamoto R 1200 RT 05 R 1200 R 10 R 900 RT 05 SF R 900 RT 10 SF R 1200 R 06 R 1200 R 11 R nineT R nineT Scrambler K 1200 S K 1300 S K 1200 R K 1200 R Sport K 1300 R S 1000 XR F 700 GS F 700 GS 17 F 800 GT F 800 S F 800 ST F 650 GS F 800 GS 08 F 800 GS 13 F 800 GS 17 F 800 GS Adventure F 800 GS Adventure 16 F 800 R F 800 R 15

Brake Caliper Piston Repair Kit

JMP Brake Disc Bolt   Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages:   - excellent corrosion resistance - surpasses grade 8.8 in steel - 42% lighter than steel  

Bracket for Brake Hose JMP Bolt   Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel.  

Bracket for Brake Hose JMP Bolt   Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel.