JMP Lever Cast   Cast levers from JMP match the original part in form and function. They offer a very good price-performance ratio and clean workmanship.  

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease. To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

  Sheet Nut   Original Spare PartTechnical Data:For Screw Ø:   4.00 mmFor Thread Size:   No Metric Thread Length:   16.60 mmWidth:   15 mmShape:   open Self-locking:   No Surface:   galvanized Material:   Steel

Timing belt for BMW motorcycles. Number of teeth 182, pitch 11, width 34.Technical Data:Length:   182 number of teethWidth:   34 mm

Touratech Suspension E1 Mono Shock Absorber for BMW F 800 GT (also ESA) 2013 - 2017 The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – the E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber carried out by a specialist workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Replacement Springs by -25mm for BMW F 800 GT (also ESA) 2013 - 2018 The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Progressive Springs for Fork and Shock Absorber for BMW F 800 GT (also ESA) 2013 - 2018 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.