BATTLAX-T31TOURING MOTORCYCLE TIRE The special features of the new Battlax Sport Touring T31 lie in the improved performance in wet conditions and the maximum contact feel with the road. This allows the rider to feel safer in any weather while enjoying the fun and thrill of the ride.   Bridgestone employs advanced NanoPro-Tech™ technology in the front tire, which increases the silica content at the molecular level in the rubber compound. This not only improves the flexibility of the rubber but also enhances grip on various surfaces as well as in wet and low-temperature conditions.   The rear tire features a 3LC rubber compound with a cap-and-base structure: the softer outer rubber compound provides outstanding grip, while the inner compound is more stable and gives the tire optimal stiffness.   The tread pattern of the T31 has a higher number of grooves in the shoulder area, allowing for better water drainage. In the central area of the rear tire, there are only a few grooves. This guarantees stability, especially at high speeds. The contact area is also up to 7 percent larger, which offers an added safety advantage, particularly when cornering.Technical Data:Width:   120 Aspect Ratio:   70 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   58 Speed Index:   (W) >270 km/h Profile:   T31 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Battlax Sport Touring T32 the new benchmark in the sport touring segment     7% shorter braking distance in wet conditions 13% larger contact area at the rear Increased profile ratio (3% front - 6% rear) New Pulse Groove Pattern Design technology Enhanced contact feel with neutral and linear handling Improved in all performance ranges High mileage (on T31 level) Technical Data:Width:   120 Aspect Ratio:   70 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   58 Speed Index:   (W) >270 km/h Profile:   T32 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Battlax Sport Touring T32 the new benchmark in the sport touring segment     7% shorter braking distance in wet conditions 13% larger contact area at the rear Increased profile ratio (3% front - 6% rear) New Pulse Groove Pattern Design technology Enhanced contact feel with neutral and linear handling Improved in all performance ranges High mileage (on T31 level) Technical Data:Width:   120 Aspect Ratio:   70 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   58 Speed Index:   (W) >270 km/h Profile:   T32 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Michelin Pilot Road 4 GT special version for heavy touring motorcycles The technical highlights of the MICHELIN Pilot Road 4 GT The patented 2AT technology offers maximum stability and comfort for heavy touring motorcycles Original equipment share on the new BMW R 1200 RT Technical Data:Width: 120 Aspect Ratio: 70 % of widthConstruction: R (Radial tire) Rim Diameter: 17 inchesLoad Index: 58 Speed Index: (W) >270 km/h Profile: PILOT ROAD 4 Special Marking: GT Manufacturer: Michelin Whitewall: No Tube Type: TL Reinforced: No Tire Type: Summer tire

BATTLAX-T31TOURING MOTORCYCLE TIRE The special features of the new Battlax Sport Touring T31 lie in the improved performance in wet conditions and the maximum contact feel with the road. This allows the rider to feel more secure in any weather while enjoying the fun and thrill of the ride.   Bridgestone employs advanced NanoPro-Tech™ technology in the front tire, which increases the silica content at the molecular level in the rubber compound. This not only improves the flexibility of the rubber but also enhances grip on various surfaces as well as in wet and low-temperature conditions.   The rear tire features a 3LC rubber compound with a cap-and-base structure: the softer outer rubber compound provides outstanding grip, while the inner compound is more stable and gives the tire optimal stiffness.   The tread pattern of the T31 has a higher number of grooves in the shoulder area, allowing for better water drainage. In the central area of the rear tire, there are only a few grooves. This guarantees stability, especially at high speeds. The contact area is also up to 7 percent larger, which offers an added safety advantage, particularly when cornering.Technical Data:Width:   180 Aspect Ratio:   55 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   73 Speed Index:   (W) >270 km/h Profile:   T31 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Battlax Sport Touring T32 the new benchmark in the sport touring segment     7% shorter braking distance in wet conditions 13% larger contact area at the rear Increased profile ratio (3% front - 6% rear) New Pulse Groove Pattern Design technology Enhanced contact feel with neutral and linear handling Improved in all performance ranges High mileage (on T31 level) Technical Data:Width:   180 Aspect Ratio:   55 % of widthConstruction:   R (Radial tire) Rim Diameter:   17 inchesLoad Index:   73 Speed Index:   (W) >270 km/h Profile:   T32 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Motorcycle Handlebar Superbike Heated Grips BMW - Made from high-strength steel, clamp area Ø22.2 mm. - For BMW models before the year 2004 with original heated grips. - Dimensions see sketch. - Tested according to the latest requirements. - With parts certificate

Gripping well in all situations! The AC S2 brake and clutch levers from AC Schnitzer combine ergonomics and functionality at a high level. Control and manageability are essential factors for safety and stress-free riding enjoyment.- 6-fold scale adjustable CNC precision lever- extremely lightweight, approx. 60 g per lever- high-tech aluminum according to aerospace standard EN 2017- perfect design - convincing finish- excellent grip feel- best controllability- adjustable while riding- aerodynamic air slots- short and long version in one lever- including end pieces for replacement & hex key- color tone black anodized, re-machined cutouts- with ABE (no registration required)

Hex ezCAN GEN 2   HEX ezCAN 4-channel CAN bus accessory manager for freely programmable control of retrofitted headlights, horns, brake lights, and other electrical consumers via the original switches of a BMW motorcycle. Splash-proof, max. load 4x10A (25A for 20 seconds), each electronically protected, including 4 connection plugs (2 or 3-pin), USB cable, mounting materials, as well as instructions (EN) and Windows PC / Mac configuration software (Online).   No registration required due to E11 approval mark.      

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Adjustable Footpeg Lowering Kit for BMW F800ST / F800GTWith the new footpeg adapter, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It can be adjusted in increments of 4°. Generally, the basic adapter can be mounted either upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters. If needed, you can also order a brake lever or a shift lever cap for your BMW. The brake lever cap does not fit the F800R.Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just as you do in a car.Please consider that lowering the footpeg also means less lean angle. Our recommendation: If you also have problems with slipping off the smooth peg while riding, you can change the peg and instead install the pegs with rubber pads from the F800S. An additional effect is that the vibrations of the peg are significantly decoupled. However, a disadvantage is that the peg is 15 mm longer.The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any modifications.

Adjustable Passenger Footpeg Lowering for BMW F800GT, F800R, F800S, F800STincluding ABEWith the footpeg adapter, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter lowers the peg of your BMW F800 by 40 mm, higher or further. In general, the base adapter can be mounted upwards or downwards.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, thereby keeping the distance to the shift and brake lever relatively constant.This achieves a natural ergonomics and a healthier sitting position.The passenger even gets the benefit of adjusting the peg upwards.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.In the case of a motorcycle change, the kit can in some cases be easily transferred.Like all adjustable products, the footpeg adapter is characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".The advantage of these adapters is that the original footpeg is retained.Please note, that lowering the footpeg also means less lean angle. But this adapter is adjustable. This way, you can easily find the optimal setting. All items have been mounted and tested on original motorcycles - without any modifications.

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

Universal programmable TPMS sensor, can be programmed via the diagnostic tool TECH350 (under accessories) or, even better, a clone of the OE sensor can be created. Valve diameter 11.5mm The battery life corresponds to the OE sensor and lasts at least 5 years

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

JMP Lever Cast   Cast levers from JMP match the original part in form and function. They offer a very good price-performance ratio and clean workmanship.  

BMW Keychain

Oil filler screws from Evotech are machined from solid material. A special aluminum alloy makes the screw stable and firm. Theft protection through a special hexagon. Radial holes that allow you to secure the filler screw with safety wire to prevent it from opening (required in motorsport, for example). Special O-ring that has higher resistance to oil, vapor, and temperature.

Oil filler screws from Evotech are machined from solid material. A special aluminum alloy makes the screw stable and firm. Theft protection through a special hexagon. Radial holes that allow you to secure the filler screw with safety wire to prevent it from opening (required in motorsport, for example). Special O-ring that has higher resistance to oil, vapor, and temperature.

Oil filler screws from Evotech are machined from solid material. A special aluminum alloy makes the screw stable and firm. Theft protection through a special hexagon. Radial holes that allow you to secure the filler screw with safety wire to prevent it from opening (required in motorsport, for example). Special O-ring that has higher resistance to oil, vapor, and temperature.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease. To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.