S1000RR 2009- Adjustable Clip-On Handlebars Black MultiClip Ø55/40-70 mm Clip-On Handlebars multiClip The Clip-On Handlebar that adapts to the rider * Individually infinitely adjustable Clip-On Handlebar that adapts to the rider * Tour Version: Height adjustment approx. 40 - 70 mm from the original handlebar position * Also available for fork diameters 41/43/45/48/50/53/55/58 mm * Laser scaling for symmetrical and correct adjustment in all positions * Maximum safety against twisting due to triple clamping on the fork * Handlebar tube offset of 5° for optimal fine adjustment * CNC machined from high-strength aluminum, black anodized

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K46 S1000RR 08-11 Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 32737721823

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

JMP Heated Grips Length of grip rubber 120 mm - 12V operation- Heating power adjustable in five levels- Electronic switch for screw and adhesive mounting- For 22 mm handlebars- Open grip end with closure cap- Grip rubber mixture is resistant to environmental influences and heat- Includes grip adhesive Power Level 1: 41.85WPower Level 2: 43.74WPower Level 3: 44.96WPower Level 4: 45.5WPower Level 5: 45.9W

Stubby Handlebar Kit multiClip Sport Ready-to-install kit with all necessary parts, always tailored to the selected vehicle model. Choose the color combination of the steel braided lines: Sheathing/Fitting. The illustration shows the exemplary scope of delivery of a multiClip Kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with a pipe handlebar directly. The stubby can also be adjusted lower again if needed. With parts certificate. KIT consists of: multiClip Sport Ø55 mm BM1S Extended clutch cable Upper brake line Spacer for fairing Hose piece for reservoir Clamp for the original fork bridge [2x] Spacer ring under the fork bridge [2x]Stubby approximately 3 cm higher / approximately 7 cm wider compared to the original.

The CNC-machined HP clutch lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine in a particularly impressive way. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the clutch lever can be individually adjusted in three stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality clutch lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in three stages. Scope of delivery: One clutch lever.

The titanium-colored CNC-machined HP brake lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine particularly impressively. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the brake lever can be individually adjusted in five stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality brake lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in five stages. Delivery includes: one brake lever, titanium-colored.

The CNC-machined HP brake lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine particularly impressively. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the brake lever can be individually adjusted in five stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality brake lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in five stages. Scope of delivery: One brake lever.

Essential on the racetrack, the M brake lever protector also makes a clear statement on the road in terms of uncompromising sportiness. The curved bracket made of aluminum and plastic protects the brake lever on the handlebar from being unintentionally activated upon contact with another vehicle, thus preventing accidents caused by a locked front wheel. The dynamic design with the M logo perfectly complements the rest of the M accessories. High-quality protection for the brake lever. Bracket made of aluminum and plastic. With laser-engraved M logo, two-tone (black/silver). Perfectly matched to the design of the motorcycle. Compatible with the clutch lever protector. Delivery includes: one protector.

The M clutch lever protector makes a clear statement on the road with its dynamic look, showcasing uncompromising sportiness. The curved bracket made of aluminum and plastic protects the clutch lever on the handlebar and is the perfect complement to the M brake lever protector. High-quality protection for the clutch lever. Bracket made of aluminum and plastic. Two-tone (black/silver) with laser-engraved M logo. Perfectly matched to the design of the motorcycle. Compatible with the brake lever protector. Scope of delivery: one protector.

Retractable brake lever by Puig Made of aluminum Adjustable length

Ready-to-install KIT with all necessary parts, always tailored to the selected vehicle model. The illustration shows the exemplary scope of delivery of a KIT multiClip. This varies depending on the motorcycle model. With the stub: significantly higher seating comfort without having to install a superbike KIT with a tubular handlebar directly The stub can also be adjusted lower again if needed With parts certificate The KIT consists of: multiClip Sport Ø55 mm Base for fairing up to approx. 5 cm higher / up to approx. 8 cm wider

Stubby Handlebars KIT multiClip Tour Ready-to-install KIT suitable for the selected vehicle model. Choose the color combination of the steel braided lines: sheath / fitting. The illustration shows the exemplary scope of delivery of a KIT multiClip. This varies depending on the motorcycle model. With the stubby handlebars: significantly higher seating comfort without having to install a superbike KIT with tube handlebars directly. The stubby handlebars can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate KIT consists of: multiClip Tour Ø55 mm Extended clutch cable Adjustment screw for clutch cable Extended throttle cable Mounting plates for fairing Upper brake line

CNC-machined Handlebar Ends for Motorcycles Distinctively elegant finish with only 6.5 mm thickness Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 44g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles High-quality anodized in color The mounting screw elegantly disappears under the cover Available in various anodized colors / End cap is always black Permanently secure fit through aluminum expansion sleeves Ø12+18 mm Weight per pair: 120g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 140g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair - Black Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 360g Dimensions: see sketch