Spark Plug Tube Seal   Original Spare Part

Engine Bolt Set JMP Bolt Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel. The set corresponds to the original equipment of the engine bolts.

JMP Bolt Engine Screw Set Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel. The set corresponds to the original equipment of the engine screws.

Endless Timing Chain   - Manufactured by Borg Warner Morse - OEM quality   Attention! Check timing after replacement and adjust if necessary.

  Timing Chain Guide Set   Original Spare Part

  Intake Valve   Original Spare PartTechnical Data:Head Diameter:   33.50 mmTotal Length:   96.99 mmStem Diameter:   4.94 mm

Cylinder Head Gasket Original Spare Part

Adjuster Kits from TRW   Consisting of a thicker and a thinner steel disc to compensate for the factory tolerances, if necessary.  

  Exhaust Valve   Original Spare PartTechnical Data:Head Diameter:   27.17 mmTotal Length:   93.42 mmStem Diameter:   4.91 mm

The carbon clutch cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is glued to the original clutch cover. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Clutch Cover Gasket Original Spare Part

Cylinder Head Gasket Original Spare Part

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K46 S1000RR Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , Kratzer und Abschürfungen Teilenummer: 11147713749

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon ignition rotor cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is attached to the engine using the 4 original screws. The lower section of the ignition rotor cover is designed as thick as possible to provide the most effective engine cover protection possible in the event of an accident. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K49 S1000XR Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer: 11148394299

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon head Wrench Size:   17 mm Material:   Titanium Color:   black For Safety Wire:   Yes O-ring/Washers:   No Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon Head Wrench Size:   17 mm Material:   Titanium Color:   blue For Safety Wire:   Yes O-Ring/Washer:   Yes Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aerospace titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength- outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon Head Wrench Size:   17 mm Material:   Titanium Color:   Gold For Safety Wire:   Yes O-Ring/Washer:   Yes Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon head Wrench Size:   17 mm Material:   Titanium Color:   silver For Safety Wire:   Yes O-ring/Washers:   Yes Magnetic:   No

Steering Head Nut JMP Bolt  Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel.      Technical Data:Type:   Flanged Nuts    Hex Nuts For Thread Size:   M28 x 1.0 For Screw Diameter:   28.0 mmSelf-locking:   No Material:   Aluminum Surface:   gold anodized Strength Class:   No strength class Special Feature:   with flange    open Color:   gold

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Set