Battery Rubber Holder

Warning Blink Relay Bosch

Left Headlight Bracket   Attention: The headlight bracket is intended for unfaired models (2-valve, R series with air-cooled twin engine between 1974 and 1985).Please note that this bracket is designed for headlights with a larger mounting hole of 22 mm diameter on the left side.

Vehicle-Specific Information:  Government VehiclesRegulator/Rectifier   For all BMW 2V Boxer models from 1969 (government version, black). 0.5 volts higher charging voltage.  

HERTH+BUSS Working Current Relay 5-pole, 12 V Mini relay with holder and flat plug connections 6.3 mm With parallel resistor for the coil Closes the circuit between the power source and an electrical consumer Application area: main headlights, auxiliary headlights, horns, heaters, fan motors, power windows, climate and ignition systems, etc. Technical Data: Connector design ID: B1 Wiring diagram: W1 Temperature range from -40 °C to max. 85 °C Load capacity (at +85 °C) normally open contact Resistive load: 20 A Inductive load: 6 A Capacitive load: 10 A Load capacity (at +85 °C) normally closed contact Resistive load: 30 A Inductive load: 20 A Capacitive load: 20 A Technical Data: Voltage : 12 V Number of Poles : 5 Switch Function : Changeover Load Capacity : 20/30 A with Holder : Yes

Lock nut including wave washer   Stainless steel   Dimensions: - Outer: 19.5mm - Inner: 4mm - Height: 14mm  

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).