Fairing Screen Holder - BMW R 1200 RS (LC) from 2015.The cockpit cover in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part was manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary for us, was subsequently coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

  The front fender for BMW models F 800 R from 2015, R 1200 R (LC) from 2015, and R 1200 RS (LC) from 2015 replaces the original component using the original mounting points. It has been designed in the rear area to significantly reduce the splash effect of water and dirt towards the engine. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part has been completely manufactured in an autoclave according to the latest guidelines from prepreg material (see FAQ) and, as is customary for us, coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.    

Left Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the left in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg material (see FAQ) and, as is customary with us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Right Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the right in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part has been completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

License plate holder two-part - BMW R 1200 R (LC) from 2015 / BMW R 1200 RS (LC) from 2015. The original cases can be used in conjunction with this license plate holder! The carbon license plate holder replaces the original component using the original mounting points. It is slightly shorter than the original part, giving the rear of the motorcycle a slightly higher appearance. The two-part license plate holder is intricately made from carbon and is attached to the frame's rear fairing. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part is manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary with us, is coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The very beautiful rear wheel cover for the R 1200 R / RS (LC) is attached to the vehicle's cardan housing using 3 screws. This fastening is so ingenious and simple that it has been confirmed and protected by the German Patent Office.This cover fits the LC models from the year 2018 onwards! The special design of the rear wheel cover significantly reduces the contamination of the motorcycle by the rear wheel. The specific shape of the cover is model-specific, ensuring that standard chassis or tire variants are taken into account. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary for us, coated with a clear plastic layer in the next step to protect against environmental influences.This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Rear Fender Carbon - BMW R 1200 R (LC) from 2015 / BMW R 1200 RS (LC) from 2015The beautifully designed rear wheel cover for the BMW models R 1200 R (LC) from 2015 and R 1200 RS (LC) from 2015 is attached to the vehicle's cardan housing using 3 screws. This fastening is so ingenious and simple that it has been confirmed and protected by the German Patent Office. This cover fits the R and RS (LC) models up to the production year 12/2017. The special design of the rear wheel cover significantly reduces the contamination of the motorcycle by the rear wheel. The shape of the cover is designed to accommodate standard chassis or tire variants.The carbon part is made entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic coating in the next step to protect against environmental influences.This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

License plate holder from PUIG Includes all parts needed for the conversion, such as the mounts for mini indicators and reflectors, the reflector... (see parts list in the assembly instructions). Only mini indicators need to be ordered separately. The license plate holder is delivered including ABE. The original license plate lighting will be reused.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

Puig Rear Wheel Cover The fender is made of durable ABS plastic and protects the motorcycle as well as the rider from kicked-up dirt. Especially during rainy rides, such a rear fender is a sensible accessory. The mudguard is delivered ready for installation with all brackets and screws (depending on the model, with additional stainless steel reinforcement or aluminum bracket). Instructions for easy self-installation are included.

Injector Cover Right - Carbon - BMW R 1200 GS (LC) / Adventure / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 The carbon injector cover is screwed onto existing mounting points on the vehicle. It enhances the vehicle and provides additional protection against damage. The installation of the parts is done using original mounting points. The carbon part is manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary with us, is coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application