Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids - black anodized Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

Guide Pin Set for Brake Pad   Original Spare PartTechnical Data:Mounting:   Thread M10 x 1.00 Shaft Diameter:   6 mmTotal Length:   58 mmShaft Length:   40 mm

BMW R1200 GS R RT RS LC original rear brake disc Part number 34218526568 K50 K51 K52 K53 K54 Original BMW spare part

for R1200GS from 2013/ BMW R1200GS Adventure from 2014/ BMW R nineT/ BMW R1200RT from 2014/ BMW R1200R from 2015/ BMW R1200RSJust a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping in-easy removal for maintenance work-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: blackAlso fits the BMW RnineT (not Scrambler)!

Just a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is now hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping on-easy removal for maintenance-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: redAlso fits the BMW RnineT (not Scrambler)!

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

Oetiker Continuous Ear Clamp (Type 167) Material: Stainless steel (Material No. 1.4301/UNS S3040) Diameter range: 11.3 - 13.8 mmBand width: 7 mmBand thickness: 0.6 mmEar width inside: 8 mm 360° Continuous design - no steps and/or overlaps on the inner circumference Narrow band, concentrated clamping force transmission Specially shaped band edges reduce the risk of damage to the binding material Weight-saving design Binding control through visibly completed deformation of the clamp tube Carton unit: 10Technical Data:Type: Ear clamps continuous Min clamping range: 11.3 mmMax clamping range: 13.8 mmWidth: 7.0 mmMaterial: Stainless steel Color: silver

Seal kit for brake caliper piston

Brake Caliper Piston Set 28mm

- Mounting accessories BMW for floating-mounted, riveted TRW-Lucas brake discs 5mm- from model year 12/2007-- the set includes 5 washers- 1 mounting kit per brake disc Most BMW motorcycle models are still equipped with a rigid brake disc, which, unlike the otherwise common floating brake discs from other motorcycle manufacturers, is directly bolted to the rim using sleeves and wave washers (or spring rings).The bolted construction was replaced by a pressed variant by BMW in 2008.With the TRW mounting kits, it is possible to cover both variants.This significantly simplifies the assignment and inventory management and is an interesting, cost-effective option for the BMW customer.

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a birdwing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design.Technical Data:Number of Holes:   5 Design:   rigid Manufacturer:   EBC

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge - Available in rigid and floating variants - Coordinated design from front to rear axle Technical Data:Outer Diameter: 320 mmInner Diameter: 181 mmBolt Circle: 202.5 mmNumber of Holes: 5 Hole Diameter: 16.5 mmThickness: 4.5 mmDesign: rigid Manufacturer: TRW

All brake discs come with an ABE, also for scooters.   The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts.   All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel.   The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads.   A uniform temperature rise and fall allows for a constant pressure point.     A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours.   Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc RAC   - Notched outer contour with slotted brake edge - Available in rigid and floating variants - Coordinated design from front to rear axleTechnical Data:Outer Diameter:   320 mmInner Diameter:   181 mmBolt Circle:   203 mmNumber of Holes:   5 Hole Diameter:   8.4 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   TRW

TRQ Brake Pads   The new pads with the new compound are the successors to the previously successful SRQ pads, featuring a significant upgrade in performance. They are classified as racing pads, but with the new ECE R90, they also have street approval. This makes them particularly suitable for giving it your all on the racetrack (e.g., during track days) and then being able to ride directly home afterward. The target audience is ambitious, sporty riders. The TRQ is positioned above the SRT.   - Higher braking performance due to a higher and more stable friction coefficient (compared to the previous SRQ) - More direct response due to optimized initial bite - Significantly lower wear on pads and discs - Approved for the street with ECE R90! - The friction material is firmly bonded to the backing plate with the NRS system - Easy bedding in recommended for optimal performance - Particularly thermally resilient thanks to the innovative sintering process  

All brake discs come with an ABE, also for scooters.   The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts.   All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel.   The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads.   A uniform temperature rise and fall allows for a constant pressure point.     A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours.   Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc RAC   - Notched outer contour with slotted brake edge - Available in rigid and floating variants - Coordinated design from front to rear axleTechnical Data:Outer Diameter:   320 mmInner Diameter:   181 mmBolt Circle:   203 mmNumber of Holes:   5 Hole Diameter:   8.4 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   TRW

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to work together. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free to move can it operate optimally!

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while also providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   276 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

Two-tone anodized cover for the rear brake fluid reservoir. CNC machined from aluminum. Patented design

Vehicle-Specific Information:  right sideBrembo is an Italian company that specializes in brakes. The company is an original equipment manufacturer for numerous vehicles such as BMW, Ducati, Aprilia, and Harley-Davidson. Brembo produces the original brake calipers with the caliper type *M4.32* for sporty motorcycles. These brake calipers ensure maximum performance and an extremely low weight through the unique Brembo Monobloc technology.   -          Caliper type: M4.32 -          Monoblock, cast -          Brake piston diameter: 32 mm -          Number of brake pistons: 4 -          Distance between mounting holes: 100 mm (center to center) -          Delivered without brake pads -          Identical to various brake calipers from the original equipment manufacturers -            Good to know: These Brembo brake calipers correspond as OEM replacement parts to the original brake calipers for the specified vehicles.

Rubber Boot Brake Caliper

SA Sintered Metal Front Brake Pads (SA) A sintered mixture specifically designed for front wheel brakes, providing improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.