The long version of the belly pan for the BMW K 1200/1300 S models is not compatible with the motorcycle&rsquos centre stand. The bottom of the belly pan is closed just as for racing to keep dirt on the motorcycle caused by splash water and road dirt to a minimum. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The short version of the belly pan for the BMW K 1200/1300 S models can be used together with the motorcycle&rsquos series centre stand. The bottom of the belly pan is closed just as for racing to keep dirt on the motorcycle caused by splash water and road dirt to a minimum. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon battery cover for the BMW K 1200/1300 S models replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part is manufactured entirely from prepreg (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic layer for protection against environmental influences.This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically,it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon clutch cover for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / BMW K 1200 R Sport (2007-2011) / K 1300 S (2008-present) / K 1300 R (2008-present) significantly emphasizes the sporty and dynamic character of the motorcycle. This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part is made entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave, and in the next step, as is customary for us, it is coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also enhances the three-dimensional effect of the carbon structure.

The fairing component in carbon for the BMW K 1200 S replaces the original part using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The side fairing in carbon for the BMW K 1200 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW K 1200 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The design of our front fender in carbon for the BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) is noticeably smaller compared to the original. This lends the motorcycle a notably sportier appearance. and special attention was again paid to this product&rsquos splash water protection. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

With the self-adhesive HP label, the HP carbon parts can be further customized as desired. The silver lettering on a black background measures 22 x 9 mm. Self-adhesive HP label for customization. Dimensions: 22 x 9 mm.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film  reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery  paint protection film set detailed instructions for application

Angeboten wird hier ein Neuteil Fahrzeug: R1200S K1200S K1300S Hersteller: BMW Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet, Kratzer auf dem Glas Teilenummer: 51167698080