Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Jet stock for Bing constant pressure carburetor type 64-3. Total length 27 mm; largest diameter 11.7 mm; hexagon SW 10 mm; thread M 12x1 and M 6

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to be resistant to gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

BMW Original Spare Part Air Filter Insert Top Brand Quality

Bolt

Choke return spring for 32mm carburetor

Choke Screw CV Carburetor

Fuel Tank Seal

Fuel Tap

Fuel Tap Seal Germa 7-Hole

Fuel Tap Seal Karcoma 5-Hole

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of wear Description: sold as shown, Germa Part number: 316121240988 Shift shaft

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Mahle Oil Filter - One-piece filter- Only for models without oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance provided by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start

O-ring for fuel tap Original spare part

  O-Ring Fuel Pressure RegulatorTechnical Data:Range:   No Inner Diameter:   5 mmOuter Diameter:   8 mmHeight:   1.5 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

51.9X45.3X0.3MM     Oil Filter Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Oil Filter Gasket Athena Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Mahle Oil Filter - Two-part filter with seals- For models without oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance provided by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Mahle Oil Filter - Two-part filter- With seals- For models with oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance ensured by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of thick oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, discoloration, scratches Part number: 13721335773

Fuel Cap Seal