Machined aluminum body, shock absorber adjustable in preload. The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

Oil Seal Athena These are of higher quality than the OEM seals and guarantee remarkable performance and resistance to high temperatures and wear.Technical Data:Inner Diameter:   65 mmOuter Diameter:   85 mmWidth:   10 mm

Nut for Rear Swingarm   Attention: 4 pieces are required!   Dimensions: - Outer: 16mm - Inner: 8.5mm - Height: 10mm  

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   510 mmDiameter 1:   26.5 mmSpring Rate 1:   4.5 N/mmSpring Rate 2:   6 N/mmAir Chamber Left:   120 mmAir Chamber Right:   120 mmRecommended Viscosity:   10W Manufacturer:   YSS

Fuel cap with key and sealing ring For easier operation, the key only requires a quarter turn to unlock and lock.The key remains in the cap when it is in the unlocked position.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.Technical Data:Cable:   1386 mm

Drive Shaft ScrewTechnical Data:Type: Threaded Screws Thread: M8 x 1.0 Diameter: 8 mmLength: 21 mmHead: External Torx Drive: External Torx Surface: Blackened Color: Black Manufacturer: Other Special Feature: With Washer For Safety Wire: No

NutTechnical Data:Type:   Hex Nuts For Thread Size:   M10 x 1.00 Self-locking:   No Wrench Size / SW:   17 mmMaterial:   Stainless Steel A2 Surface:   No Finishing Strength Class:   No Strength Class Color:   silver

Puig Windscreen NAKED A windscreen in the naked bike look. Made from durable polycarbonate. It offers good protection against wind and weather and improves aerodynamics. Installation instructions and required mounts are included.Technical Data:Height:   345 mmWidth:   320 mmColor:   dark smoke gray Manufacturer:   Puig

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, scratches, rust Part number: 33172301233

  Drive Shaft Bolt Total Length: 20mm Thread Length: 12.5mmTechnical Data:Type:   Threaded Bolts Thread:   M8 x 1.0 Diameter:   8 mmLength:   12.5 mmHead:   External Torx Drive:   External Torx Surface:   Blackened Color:   Black Manufacturer:   Other Special Feature:   With Washer For Safety Wire:   No

  Oil SealTechnical Data:Inner Diameter:   28 mmOuter Diameter:   55 mmWidth:   9 mm

Offered here is a used part Vehicle: R45 R65 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, scratches, rust BMW part number: 33531237227 / 228

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Swingarm Cap

Swingarm Bearings

All Balls Racing Repair Kit Swingarm Bearings / Wheel Bearing Kit - including sealing rings

Quality ball bearings from NTN.Technical Data:Design:   Tapered roller bearing Type:   4T-30203 Inner diameter:   17.00 mmOuter diameter:   40.00 mmWidth:   14.00 mmSealing:   none Bearing clearance:   Standard