Machined aluminum body, hydraulic shock absorber with adjustable spring preload, rebound (30 clicks), and compression (high/low 30 clicks). The adjustment of the spring preload is connected to the damper via a hose, making access easier. The length of the damper is adjustable by +-5mm.

Machined aluminum body, shock absorber adjustable in spring preload and rebound (30 clicks). The adjustment of the spring preload is connected to the damper via a hose, making access easier. The length of the damper is adjustable by +-5mm.

Progressive Springs for Fork and Shock Absorber for BMW R NineT 2017 - 2019 These progressive replacement springs are perfectly tuned to the fork and shock absorber of your motorcycle. This results in better coordination for the demands of motorcycle touring. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Fork springs. - Replacement spring for original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the glide properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

Vehicle-Specific Information: Lowering by 30 mmWith the MFW rear lowering kit, you can customize your motorcycle to meet your personal needs. Reduction of seat height, allowing you to achieve a secure footing with both feet Easier and safer maneuvering Modification of the shock absorber linkage through various systems, tailored to the specific vehicleDue to the lowering, the seat height is reduced by 15-50 mm (depending on the model). We recommend having the installation done by a professional workshop! With ABE, no registration required Made in Germany

Seal kit with dust caps from All Balls Racing   - better breakaway torque and up to 3x lower friction than OE seals - Patented Max-Life manufacturing, which increases lifespan by 3-4 times - Seals are triple sealed - Dust caps are coated with a special grease to improve responsiveness to enhance performance

Crash Pad Kit for Rear AxleThe crash pad is precisely designed for BMW models with a single-sided swingarm.The crash pads for the rear axle made of abrasion-resistant plastic protect the swingarm from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery1 x Crash Pad Kit for Rear AxleInstallation instructionsMounting materialsDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Dust cap for BMW fork   Original spare partTechnical Data:Manufacturer:   BMW

Seal for Fork BMW   Original spare part     Attention: Please order 2x!Technical Data:Inner Diameter:   46 mmOuter Diameter:   58 mmInstallation Height:   8.5 mmTotal Height:   11 mmManufacturer:   BMW

O-Ring

Puig Rear Wheel Cover The fender is made of durable ABS plastic and protects the motorcycle as well as the rider from kicked-up dirt. Especially during rainy rides, such a rear fender is a sensible accessory. The mudguard is delivered ready for installation with all brackets and screws (depending on the model with additional stainless steel reinforcement or aluminum bracket). Instructions for easy self-installation are included.

Shaft Seal

ELRING Sealing Ring Dust protection: without dust lip Material: NBR (Nitrile Butadiene Rubber) Type of radial shaft seal: A Height [mm]: 7 mm Outer diameter [mm]: 52 mm Inner diameter [mm]: 32 mm suitable for: AUDI BMW SEAT SKODA VW Technical Data:Inner diameter:   35 mmOuter diameter:   52 mmWidth:   7 mm

Black-T E1 Mono Shock Absorber for for BMW R NineT 2013 - 2019 The E1 product line from Black-T Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – the E1 shock absorbers provide a completely new experience of ride dynamics, safety, and precision. The Facts: - Black-T shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Black-T E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal ride dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

More performance and comfort for your BMW RnineT / Racer / Pure with the Black-T Shock Absorber Type Stage3. Whether you're heading out for a twisty ride or a leisurely tour with friends, the wide adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Stage3 shock absorber in emulsion design can be adjusted for load adaptation to the large luggage via handwheel and hydraulic spring preload. The rebound adjustment allows for the necessary fine-tuning for any road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding style. The new suspension dimension for your BMW RnineT / Racer / Pure.   Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to ride. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   Features of the Black-T Stage3 Shock Absorber: - The shock absorber housing is made of aluminum. - This results in the lowest possible weight. - There are low-friction special seals with integrated Teflon support rings for low wear and long service life of the shock absorbers. - Emulsion construction and finer response of the shock absorber. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability. - 46mm damper piston with special Touratech setup. - Stable stainless steel bushings are installed in the shock eye for the mounting screws. - This ensures a stable, play-free fit of the mounting screw even under the highest loads. - All components are designed for intensive use in travel operation. - Hydraulic high-end spring preload via a conveniently positioned handwheel. - QR code on the shock absorber with individual shock absorber information. - Fully serviceable. This ensures consistently high riding dynamics.   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form  

This BLACK-T Stage4 shock absorber is perfectly tailored for the BMW RnineT / Racer / Pure. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this premium shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of additional load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension tuning at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT / Racer / Pure.   Important points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the BMW RnineT. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form  

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1200GS. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing the ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and resilient PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver