Machined aluminum body, shock absorber adjustable in spring preload and rebound (30 clicks). The adjustment of the spring preload is connected to the damper via a hose, making access easier. The length of the damper is adjustable by +-5mm.

Machined aluminum body, hydraulic shock absorber with adjustable spring preload, rebound (30 clicks), and compression (high/low 30 clicks). The adjustment of the spring preload is connected to the damper via a hose, making access easier. The length of the damper is adjustable by +-5mm.

Lowering Replacement Springs by -25mm for BMW R NineT SCRAMBLER / URBAN G/S 2016 - 2020 The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This BLACK-T Stage4 shock absorber is perfectly tailored to the BMW RnineT/Urban G/S. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this elegant shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel through the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension settings tailored to your riding style at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT /Scrambler/Urban G/S. Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup used here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

More performance and comfort for your BMW RnineT - Scrambler/Urban G/S with the Black-T Stage3 shock absorber. Whether you're heading out for a twisty ride or a leisurely tour with friends, the wide adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Stage3 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. The rebound adjustment allows for the necessary fine-tuning for every road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding styles. The new suspension dimension for your BMW RnineT - Scrambler/Urban G/S from 2021.   Key points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   Features of the Black-T Stage3 shock absorber: - The shock absorber housing is made of aluminum. - This results in the lowest possible weight. - It features low-friction special seals with integrated Teflon support ring for minimal wear and long lifespan of the shock absorbers. - Emulsion construction and finer response of the shock absorber. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability. - 46mm damper piston with special Touratech setup. - Stable stainless steel bushings are installed in the shock eye for the mounting screws. - This ensures a stable, play-free fit of the mounting screw even under the highest loads. - All components are designed for intensive use in travel operations. - Hydraulic high-end preload adjustment via a conveniently positioned handwheel. - QR code on the shock absorber with individual shock absorber information. - Fully serviceable. This ensures consistently high riding dynamics.     The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document

Steering damper from YSS, anodized platinum. Adjustable with 30 clicks. 75mm stroke. Mounting clamp for horizontal attachment to the motorcycle.Included are 2 mounting bushings 6mm for reduction.Mounting bolt: 8mm for clamp and damper arm.   A clamp for horizontal mounting on the vehicle is included in the delivery.

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

The JMP fork dust seals are manufactured by NOK in Japan. NOK is the leading Japanese supplier of fork seals and dust caps, supplying many well-known vehicle manufacturers in Japan and Europe, as well as the leading manufacturers of shock absorbers and chassis components in the motorcycle sector. Therefore, JMP fork dust seals are a high-quality replacement for the original part and guarantee a long service life, low friction, and thus improved responsiveness.Technical Data:Inner Diameter: 43 mmOuter Diameter: 54.2 mmInstallation Height: 6 mmTotal Height: 11 mmManufacturer: JMP

JMP Sliding Bushings   - high-quality OE replacement for worn sliding bushings - dimensions and tolerances precision manufactured - made from hardened steel - corrosion protection through copper coating - coated with PTFE to reduce friction on the sliding surfaceTechnical Data:Outer Diameter:   43.70 mmHeight:   20 mmWall Thickness:   1.00 mm

Crash Pad Kit for Rear AxleThe crash pad is precisely designed for BMW models with a single-sided swingarm.The crash pads for the rear axle made of abrasion-resistant plastic protect the swingarm from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery1 x Crash Pad Kit for Rear AxleInstallation instructionsMounting materialsDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

The Scottoiler Micro V Essentials Kit includes all the necessary mounting components.The special feature is the small tank with a capacity of only 35ml, which allows for installation on very small vehicles or under tight fairing parts.This amount of oil enables efficient chain lubrication for approximately 1,200km.To allow the customer to choose the right oil for them, this kit is delivered without oil.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW RnineT Scrambler/UrbanG/S model. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide significantly improved responsiveness and higher reserves in the limit range.   Info: Fits only for “BMW RnineT Scrambler/UrbanG/S from 2015”   Scope of delivery: - Replacement spring for the original shock absorber. - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

Puig Rear Wheel Cover The fender is made of durable ABS plastic and protects the motorcycle as well as the rider from kicked-up dirt. Especially during rainy rides, such a rear fender is a sensible accessory. The mudguard is delivered ready for installation with all brackets and screws (depending on the model with additional stainless steel reinforcement or aluminum bracket). Instructions for easy self-installation are included.

Shaft Seal

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1200GS. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing the ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and resilient PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

Black-T E1 Mono Shock Absorber for BMW R NineT SCRAMBLER, URBAN G/S 2016 - 2019 The E1 product line from Black-T Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the respective motorcycle after intensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – the E1 shock absorbers provide a completely new experience of riding dynamics, safety, and precision. The Facts: - Black-T shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of Delivery: - Ready-to-install Black-T E1 shock absorber - Adjustment tool - ABE documents (Online) - Installation instructions We recommend having the installation and removal of the shock absorber carried out by a specialist workshop. Tip: Only an upgrade of the suspension from the rear and front of the motorcycle achieves optimal riding dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.