Lowering Replacement Springs by -25mm for BMW R NineT SCRAMBLER / URBAN G/S 2016 - 2020 The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

JMP Sliding and Guide Bushings   - high-quality OE replacement for worn sliding bushings - dimensions and tolerances precision-engineered - made from hardened steel - corrosion protection through copper coating - coated with PTFE to reduce friction on the sliding surface

Fork Seal Set with Dust Cap Tourmax   Made in Japan      Technical Data:Seal: Inner Diameter:   43 mmSeal: Outer Diameter:   54 mmSeal: Installation Height:   11 mmSeal: Total Height:   11 mmDust Cap: Inner Diameter:   43 mmDust Cap: Outer Diameter:   54 mmDust Cap: Installation Height:   5.8 mmDust Cap: Total Height:   13 mmManufacturer:   Tourmax

These continuously progressive fork springs are perfectly tuned to the original fork of the BMW RnineT . They provide the fork with the best possible tuning and optimal front wheel guidance. BLACK-T High Suspension Fork Springs offer a significantly improved response and higher reserves in the limit range.Info: Fits only for the original fork of the “BMW RnineT Scrambler / Urban G/S from 2015“For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.- When replacing only one component, optimal handling is not achieved.- You can find the matching components for the motorcycle in the accessories of this item.   “Please scroll down” Our recommendation: Have the conversion carried out by a specialist workshop.Scope of delivery:- Replacement spring for the original fork.- Suitable fork oil.- Paste to improve the sliding properties of the inner tubes.- Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW RnineT Scrambler/UrbanG/S model. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide significantly improved responsiveness and higher reserves in the limit range.   Info: Fits only for “BMW RnineT Scrambler/UrbanG/S from 2015”   Scope of delivery: - Replacement spring for the original shock absorber. - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

Color/ Black Set includes - 1x Oil seal 43 x 54 x 9 - 1x Dust cap 43 x 54.35 x 5 - 1x Spacer 2mm The spacer can be used to compensate for height differences compared to the OE oil seals. A mounting instruction is included in the package. SKF Fork Oil Seal In the development of the fork oil seals, SKF placed special emphasis on sealing performance.This means that the highest quality materials were deliberately chosen for the SKF fork seals and SKF dust wipers. A major advantage of the SKF seal kits is that they have a very good stick-slip effect (sticking and sliding).The so-called stick-slip effect is very low, thus SKF guarantees a very good sensitive response of the motorcycle fork and mountain bike fork. The response of the fork is improved by 20%.Furthermore, the fork with the SKF kits sucks in less air through the seal into the fork, significantly reducing the need to pump up the fork.Technical Data:Oil seal: Inner diameter: 43 mmOil seal: Outer diameter: 54 mmOil seal: Installation height: 9 mmOil seal: Total height: 9 mmDust cap: Inner diameter: 43 mmDust cap: Outer diameter: 54.35 mmDust cap: Installation height: 5 mmManufacturer: SKF

Color/ Green Set includes - 1x Oil Seal 43 x 54 x 9 - 1x Dust Cap 43 x 54.35 x 5 - 1x Spacer 2mm The spacer can be used to compensate for height differences with the OE oil seals. A mounting instruction is included in the package. SKF Fork Oil Seal In the development of the fork oil seals, SKF placed special emphasis on sealing performance.This means that the highest quality materials were deliberately chosen for the SKF fork seals and SKF dust wipers. A major advantage of the SKF seal kits is that they have a very good stick-slip effect (sticking and sliding).The so-called stick-slip effect is very low, thus SKF guarantees a very good sensitive response of the motorcycle fork and mountain bike fork. The response of the fork is improved by 20%.Furthermore, the fork with the SKF kits sucks in less air through the seal into the fork, significantly reducing the need to pump up the fork.Technical Data:Oil Seal: Inner Diameter: 43 mmOil Seal: Outer Diameter: 54 mmOil Seal: Installation Height: 9 mmOil Seal: Total Height: 9 mmDust Cap: Inner Diameter: 43 mmDust Cap: Outer Diameter: 54.35 mmDust Cap: Installation Height: 5 mmDust Cap: Total Height: 5 mmManufacturer: JMP

Dual Compound Set includes - 1x Oil Seal 43 x 54 x 9 - 1x Dust Cap 43 x 54.35 x 5 SKF Fork Oil Seal In the development of the fork oil seals and fork sealing rings, SKF placed special emphasis on sealing performance.This means that the highest quality materials were deliberately chosen for the SKF fork sealing rings and SKF dust wipers. A major advantage of the SKF sealing kits is that they have a very good stick-slip effect (sticking and sliding).The so-called adhesion-sliding effect is very low, thus guaranteeing SKF a very good sensitive response of the motorcycle fork and mountain bike fork. The response of the fork is improved by 20%.Furthermore, the fork with the SKF kits sucks in less air through the seal into the fork, significantly reducing the need to pump up the fork.Technical Data:Oil Seal: Inner Diameter: 43 mmOil Seal: Outer Diameter: 54 mmOil Seal: Installation Height: 9 mmOil Seal: Total Height: 9 mmDust Cap: Inner Diameter: 43 mmDust Cap: Outer Diameter: 54.35 mmDust Cap: Installation Height: 5 mmDust Cap: Total Height: 5 mmManufacturer: SKF

Cone Roller Bearing Set for Steering Head with Dust Seals          Technical Data:Type:   Cone Roller Bearing Manufacturer:   JMT Outer Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mmOuter Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mm

Tapered Roller Bearing Set for Steering Head Tourmax   Made in JapanTechnical Specifications:Type:   Tapered Roller Bearing Manufacturer:   Tourmax Outer Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mmOuter Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mm

Crash Pad Kit for Front AxleThe crash pads for the front axle made of abrasion-resistant plastic protect the fork from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the forkDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery2 x Crash Pad Kit for Front AxleInstallation instructionsMounting materialsDetailsTotal weight: approx. 0.3 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.