The airchannel cover in carbon for the BMW R 90 T is a direct replacement for the original component.  Attention: The cover fits. without any necessary changes on the bike. from model 08/2015! It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The fuel tank protector for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 67g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The headlight cover in Carbon for the BMW R nineT Urban GS from 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ignition lock cover for the BMW R Nine T / Scrambler Comes on top the original component and. with the weight of only 18g. does not really influence the Performance of the bike in a negative way.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The injector cover for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 30g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The instrument cover for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 36g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The high-quality HP carbon cover for the throttle body combines elegant aesthetics with the perfection of a lightweight high-tech material. The exclusive CFRP component is sealed with a UV-resistant high-gloss coating and adds an individual sporty accent. Noble high-tech appearance. CFRP with UV-resistant high-gloss coating.

The rear frame cover left side for the BMW R NineT Serie in carbon fibre.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear frame cover right side for the BMW R NineT Serie in carbon fibre.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 460g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger designed for the offroad tires fits the BMW R nineT Urban GS / Scrambler and is attached to the vehicle&rsquos bevel drive housing using the original screws. Attaching it is so easy and ingenious it&rsquos been acknowledged and protected by the German patent office. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Safety rearview mirror is the ideal motorcycle mirror for your adventure bike. It fits any motorcycle with a M10 x 1.5 right-hand thread mirror mount. The mirror not only looks great, but it is also made of high-quality and extremely durable plastic.Thanks to the aspherical part, the visible area is enlarged - thus the "blind spot" is a thing of the past. The ball joint allows for easy adjustment of the rearview mirror. A sensible safety feature - for city traffic, country roads, and highways! Sold as a set for the left and right side.With ECE approval mark!Dimensions:Overall approx. (hxb) 160 x 260 mmGlass approx. (hxb) 82 x 140 mm

This tank cover in carbon for the left side of the Petrol Tank of the BMW R 90 T / Scrambler matches not only with the black original tank. it looks also perfect with the Grey or the BMW Optional Alu Tank. We recommend to use the tank cover together with the injector cover in carbon. It looks fantastic on the bike!