For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

Vehicle-Specific Information: for vehicles with cruise control Brake light/clutch switch Original spare part

Clutch Switch Original Spare Part

This new charger is the logical evolution of the successful and proven built-in socket 01-030-0084-0. All weatherproof and BMW Plug-and-Play features remain the same, but the electronics take it a step further. The built-in socket features a USB-A and a USB-C port, but the most important aspect is the 12 different fast charging protocols with automatic detection of the connected device.The USB ports can be separately covered with custom-fit rubber caps. An unused port is thus safely protected from environmental influences such as water and dirt!Technical Data:Input: 8 to 30 Volts DCVarious fast charging protocols automatically adjust the power to the connected device.Supported fast charging protocols:USB-C port only: USB PD3.0/PD2.0/PPS (for Apple fast charging, an Apple Lightning to USB-C cable must be used).Both ports: Qualcomm Quick Charge QC4+/QC4/QC3.0/QC2.0, Samsung AFC, Huawei FCP and SCP, MediaTek PE2.0/PE1.1, Spreadtrum SFCP, OPPO VOOC.Others: BC1.2, Apple 2.4APower:USB-C: 5V⎓3A / 9V⎓3A / 12V⎓3A (36W max.)USB-A: 4.5V⎓5A / 9V⎓3A / 12V⎓3A (36W max.)USB-C + USB-A: 5V⎓4.8A (24W max.) 

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket

Hex ezCAN Extension Cable Set   The Hex ezCAN Extension Cable Set extends the four switch outputs with pre-assembled cables.   Scope of delivery:   1 piece of 3-wire extension cable L = approx. 45cm2 pieces of 3-wire extension cable L = approx. 145cm1 piece of 2-wire extension cable L = approx. 145cm3 pieces of connectors with pins & cable plugs5 pieces of sockets with pins & cable plugsBag of small and insulating materials

The charging socket with 12-volt voltage allows the supply of external power consumers. With the BMW USB charger, external navigation devices, music players, or mobile phones can be powered or charged even while riding. Additional Information: Fits the following vehicles: G 310 GS G 310 R C 400 GT R nine T R nine T Pure R nine T Scrambler R nine T Urban G/S R 1200 GS LC R 1250 GS R 1200 GS LC Adventure R 1250 GS Adventure S 1000 R S 1000 RR from 2019 M 1000 RR S 1000 XR F 750 GS F 850 GS F 850 GS Adventure

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable