Black-T E1 Mono Shock Absorber for for BMW R NineT Pure, R NineT Racer, R NineT Scrambler factory low 2017 - 2019 The E1 product line from Black-T Suspension represents the entry into the world of chassis tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding chassis performance. E1 shock absorbers are individually configured for the respective motorcycle after intensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – the E1 shock absorbers provide a completely new experience of driving dynamics, safety, and precision. The facts: - Black-T shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Black-T E1 shock absorber - Adjustment tool - ABE documents (Online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only an upgrade of the chassis from the rear and front of the motorcycle achieves optimal driving dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our chassis check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW RnineT Pure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. BLACK-T High End Suspension Components provide a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW RnineT Pure from 2017” Scope of delivery:- Replacement spring for the original shock absorber.- Replacement spring for the original fork.- Suitable fork oil.- Paste to improve the sliding properties of the inner tubes.- Including detailed installation instructions. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This BLACK-T Stage4 shock absorber is perfectly tailored to the BMW RnineT/Urban G/S. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this elegant shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel through the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension settings tailored to your riding style at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT /Scrambler/Urban G/S. Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup used here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

More performance and comfort for your BMW RnineT - Racer/Pure with the Black-T Stage3 Shock Absorber. Whether you're heading out for a twisty ride or a leisurely tour with friends, the wide adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Stage3 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. The rebound adjustment allows for the necessary fine-tuning for any road condition and purpose. Whether it's highways, federal roads, small country roads, or a spirited, ambitious riding style. The new suspension dimension for your BMW RnineT - Racer/Pure from 2021.   Key points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to ride. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   Features of the Black-T Stage3 Shock Absorber: - The shock absorber housing is made of aluminum. - This results in the lowest possible weight. - It features low-friction special seals with an integrated Teflon support ring for minimal   wear and long service life of the shock absorbers. - Emulsion construction and finer response of the shock absorber. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability. - 46mm damper piston with special Touratech setup. - Stable stainless steel bushings are installed in the shock eye for the mounting screws. - This ensures a stable, play-free fit of the mounting screw even under the highest loads. - All components are designed for intensive use in travel operations. - Hydraulic high-end preload adjustment via a conveniently positioned handwheel. - QR code on the shock absorber with individual shock absorber information. - Fully serviceable. This ensures consistently high riding dynamics.     The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

This BLACK-T Stage4 shock absorber is perfectly tailored for the BMW RnineT - Racer/Pure. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this premium shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of additional load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand using the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension tuning at any time. For every road condition and purpose, whether on highways, main roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT - Racer/Pure. Key points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the BMW RnineT - Racer/Pure. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with a black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

Puig Ranger Windscreen A universal windscreen for motorcycles with round headlights. It provides good protection against wind and weather. The head and upper body are relieved from wind pressure, allowing for a relaxed ride even on long tours. The universal mount with 4 attachment points is included in the delivery. The mounting points are on the handlebars and the fork. Made from impact-resistant and 3mm thick acrylic. A mounting guide and required brackets are included.Technical Data:Height: 510 mmWidth: 510 mmColor: light smoke gray Manufacturer: Puig

Crash Pad Kit for Rear AxleThe crash pad is precisely designed for BMW models with a single-sided swingarm.The crash pads for the rear axle made of abrasion-resistant plastic protect the swingarm from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the swingarmDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery1 x Crash Pad Kit for Rear AxleInstallation instructionsMounting materialsDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.1 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Puig Rear Wheel Cover The fender is made of durable ABS plastic and protects the motorcycle as well as the rider from kicked-up dirt. Especially during rainy rides, such a rear fender is a sensible accessory. The mudguard is delivered ready for installation with all brackets and screws (depending on the model with additional stainless steel reinforcement or aluminum bracket). Instructions for easy self-installation are included.

Shaft Seal

More performance and comfort for your BMW RnineT / Racer / Pure with the Black-T Shock Absorber Type Stage3. Whether you're heading out for a twisty ride or a leisurely tour with friends, the wide adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Stage3 shock absorber in emulsion design can be adjusted for load adaptation to the large luggage via handwheel and hydraulic spring preload. The rebound adjustment allows for the necessary fine-tuning for any road condition and purpose. Whether on highways, federal roads, small country roads, or spirited, ambitious riding style. The new suspension dimension for your BMW RnineT / Racer / Pure.   Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to ride. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   Features of the Black-T Stage3 Shock Absorber: - The shock absorber housing is made of aluminum. - This results in the lowest possible weight. - There are low-friction special seals with integrated Teflon support rings for low wear and long service life of the shock absorbers. - Emulsion construction and finer response of the shock absorber. - Large 16 mm piston rod made of chrome-molybdenum steel for maximum stability and durability. - 46mm damper piston with special Touratech setup. - Stable stainless steel bushings are installed in the shock eye for the mounting screws. - This ensures a stable, play-free fit of the mounting screw even under the highest loads. - All components are designed for intensive use in travel operation. - Hydraulic high-end spring preload via a conveniently positioned handwheel. - QR code on the shock absorber with individual shock absorber information. - Fully serviceable. This ensures consistently high riding dynamics.   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form  

This BLACK-T Stage4 shock absorber is perfectly tailored for the BMW RnineT / Racer / Pure. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this premium shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of additional load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension tuning at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT / Racer / Pure.   Important points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the BMW RnineT. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling.   The basic setup installed here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual   "Optional" also available with black replacement spring   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form