For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket

Hex ezCAN Extension Cable Set   The Hex ezCAN Extension Cable Set extends the four switch outputs with pre-assembled cables.   Scope of delivery:   1 piece of 3-wire extension cable L = approx. 45cm2 pieces of 3-wire extension cable L = approx. 145cm1 piece of 2-wire extension cable L = approx. 145cm3 pieces of connectors with pins & cable plugs5 pieces of sockets with pins & cable plugsBag of small and insulating materials

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable