The carbon alternator cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) with partially attached using the alternator cover screws. and in the front area also glued on using a small dot on the alternator cover. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The carbon bellypan is not only light as a feather. it also gives the BMW S1000XR a completely new look. It completely replaces the two smaller original covers and extends over the full length. The engine and other critical components are protected even better. while the sporty look of the motorcycle is further intensified. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.     The facts:   - This version can NOT be installed with the main stand. Here you can find the version compatible with a main stand. - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Oil filler screws from Evotech are machined from solid material. A special aluminum alloy makes the screw stable and firm. Theft protection through a special hexagon. Radial holes that allow you to secure the filler screw with safety wire to prevent it from opening (required in motorsport, for example). Item comes without O-ring. Please use the original.

  Exhaust Valve   Original Spare PartTechnical Data:Head Diameter:   27.15 mmTotal Length:   92.44 mmStem Diameter:   4.91 mm

  Intake Valve   Original Spare PartTechnical Data:Head Diameter:   33.50 mmTotal Length:   96.04 mmStem Diameter:   4.96 mm

Oil filler screws from Evotech are machined from solid material. A special aluminum alloy makes the screw stable and firm. Theft protection through a special hexagon. Radial holes that allow you to secure the filler screw with safety wire to prevent it from opening (required in motorsport, for example). Item comes without O-ring. Please use the original.

Clutch Cover BMW S1000XR from 2015 The clutch cover in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Clutch Cover Gasket Original Spare Part

Cylinder Head Gasket Original Spare Part

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K46 S1000RR Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , Kratzer und Abschürfungen Teilenummer: 11147713749

Front Sprocket Cover BMW S1000XR'15 The front Sprocket Cover in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The carbon ignition rotor cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is attached to the engine using the 4 original screws. The lower section of the ignition rotor cover is designed as thick as possible to provide the most effective engine cover protection possible in the event of an accident. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Angeboten wird hier ein Gebrauchtteil Fahrzeug: K49 S1000XR Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer: 11148394299

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon head Wrench Size:   17 mm Material:   Titanium Color:   black For Safety Wire:   Yes O-ring/Washers:   No Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon Head Wrench Size:   17 mm Material:   Titanium Color:   blue For Safety Wire:   Yes O-Ring/Washer:   Yes Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aerospace titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength- outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon Head Wrench Size:   17 mm Material:   Titanium Color:   Gold For Safety Wire:   Yes O-Ring/Washer:   Yes Magnetic:   Yes

Oil Drain Plug JMP Bolt   Magnetic oil drain plugs made of titanium collect metallic wear particles on the magnetand thus protect the engine from excessive wear! Alnico 5 LNG44 Magnet. Made from durable aircraft titanium 6AL4V (Grade 5), which offers the following advantages: - excellent strength - outstanding corrosion resistance- surpasses grade 8.8 in steel- 42% lighter than steelTechnical Data:Thread:   M16 x 1.5 Length:   12 mmHead:   Hexagon head Wrench Size:   17 mm Material:   Titanium Color:   silver For Safety Wire:   Yes O-ring/Washers:   Yes Magnetic:   No

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Set

This is a new part offered Vehicle: S1000RR Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 11437715430 Fits according to part number for the following vehicles:

Oil Level Check

JMP Oil Temperature Direct Meter / Analog Display   The original oil filler screw must be replaced with the direct meter. Please note that the measuring probe is often only wetted with splashed oil.A measurement at, for example, the oil drain screw will therefore yield a different value.  Technical Data:Thread:   24 x 2.0 Thread Length:   11 mmTotal Length:   33 mmNeedle Length (exposed):   14 mm

JMP Oil Temperature Direct Meter / Analog Display   The original oil filler screw must be replaced with the direct meter. Please note that the measuring probe is often only wetted with splashed oil.A measurement at, for example, the oil drain screw will therefore yield a different value.  Technical Data:Thread:   24 x 2.0 Thread Length:   11 mmTotal Length:   34 mmNeedle Length (exposed):   14 mm

JMP Oil Temperature Direct Meter / Analog Display   The original oil filler screw must be replaced with the direct meter. Please note that the measuring probe is often only wetted with splashed oil.A measurement at, for example, the oil drain screw will therefore yield a different value.  Technical Data:Thread:   24 x 2.0 Thread Length:   11 mmTotal Length:   33 mmNeedle Length (exposed):   14 mm