BATTERY HOLDER "UNDERENGINE S1" A solution for all those who no longer want their large battery in plain sight. The suspension of the battery box is done at the rear axle of the engine mount. Additionally, 2 rubber buffers serve as supports to brace the battery box against the oil pan. 2 rubber grommets are used for cable routing. 2 tension springs hold the lid. Easy installation. Universal mounting materials included in the delivery .Important notes: Main stand must be removed Specifically designed for small batteries, e.g.: cs-batteries Batteries must be insulated by the customer (rubber mats) Material: 1.4301 (stainless steel) surface shot-blasted Width (internal measurement) 179 mm Height (internal measurement) 83 mm Depth (internal measurement) 98 mm Larger battery boxes available upon request!BATTERY HOLDER "UNDERENGINE S1" Stainless steel shot-blasted for BMW 2-valve boxer /5- /6 - /7 R 45, R 65, R 65LS `78 - `84 R 65, R 80, R 80RT, R 100 RS, RT - All Monolever models from `85 R80G/S, R80ST, R80GS, R100 GS, R80R / 100R and Mystik

BATTLAX-ADVENTURECROSS-AX41ADVENTURE MOTORCYCLE TIRE      50% Off-Road 50% On-Road 30% higher stability of the rubber compound Even wear Off-Road traction and grip performance Technical Data:Width:   4.00 Construction:   - (Diagonal tire) Rim Diameter:   18 inchesLoad Index:   64 Speed Index:   P -150 km/h Profile:   AX41 Special Marking:   M+S Manufacturer:   Bridgestone Whitewall:   No Tube Marking:   TL Reinforced:   No Tire Type:   Winter tire

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, adjustable spring preload for the shock absorber. The locking of the spring preload is done using a set screw.   The adjustment tool is included in the delivery.      

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

All Balls Racing tapered roller bearing set for steering head / wheel bearing set   Note: Steering head bearing set only for GasGas, wheel bearing set only for BMW!   - includes all bearings and seals required for installation - high-quality OE replacement for ball bearings or direct replacement for tapered bearings - specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean  

Elring Aluminum Seal Ring DIN/ISO: 7603 Shape: A-Form Material: Aluminum Thickness/Strength [mm]: 1.5 mm Outer Diameter [mm]: 22 mm Inner Diameter [mm]: 18 mm Packaging unit 100 (Price per piece packaging unit = Minimum order quantity) used among others for oil drain plugs in vehicles: BMW (G30, F90, G11, G12, G05, G15, G06) BMW MOTORCYCLES Technical Data:Range: No Inner Diameter: 18 mmOuter Diameter: 22 mmHeight: 1.5 mmMaterial: Aluminum Design: A-Form Gasoline Resistant: Yes Oil Resistant: Yes

Ball Bearing

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

Battery Rubber Holder

Battery Strap Total Length: 200 mm

Injector for Bing constant pressure carburetor type 64-3. - Replacement part for Bing carburetors: 64/26/301 - 64/26/304 64/26/315 - 64/26/318

Jet stock for Bing constant pressure carburetor type 64-3. Total length 27 mm; largest diameter 11.7 mm; hexagon SW 10 mm; thread M 12x1 and M 6

Washer for main jet for Bing constant vacuum carburetor type 64-3. Outer diameter 15 mm; Inner diameter 6.1 mm

Needle jet for Bing constant vacuum carburetor type 64-3. 4 grooves/indentations at the top; total length 53 mm; shaft diameter 2.4 mm; tip diameter 1.20 mm. - Replacement part for Bing carburetors: 64/26/315 - 318 64/32/311 - 312 64/32/335 - 336 64/32/347 - 354 64/32/357 - 362 64/32/375- 377(Ducati Indiana 650 US)- 379(Ducati Indiana 750 US)- - 381(Ducati Indiana 350)- - 383 - 385

Mounting screw for the piston of the Bing constant vacuum carburetor type 64-3. Note: Price per piece

Seal for rotary slide for Bing constant pressure carburetor type 64-3. Largest dimension 34x44 mm

Spring bracket for the attachment of the float chamber Bing constant pressure carburetor type 64-3.

BMW Keychain

The innovative tank bag mounting system - Fidlock patented This solid tank ring allows for the attachment of a Lock-it tank bag from Hepco&Becker.Included in the delivery is a Lock-it tank ring, as well as the counter holder, which can be individually screwed onto the tank bag depending on the tank shape and handlebar angle.The fuel cap can still be opened without any problems with the tank ring mounted.In general, you only need this tank ring and a tank bag from H&B, and you have everything you need.Each model-specific tank ring is usually available for the respective motorcycle model. If no tank ring is available, these universal tank rings can help. You can find the suitable tank ring by measuring various dimensions using the checklist here in the shop. FEATURES: absolutely secure hold, even at high speeds mechanical/magnetic locking easy operation the tank bag is simply inserted and locks automatically with an audible click thanks to the magnets Unlocking: The mechanism is unlocked by a strap in the forward direction on the tank bag; the tank bag is simply removed simple yet effective mechanics Fidlock patented shielded magnetic field, safe for credit cards and electronic devices Recommended maximum speed with mounted tank bag: 130 km/h (Please observe the motorcycle manufacturer's specifications, as well as the model-specific information in the manual or here with the product) Recommended load in the tank bag: approx. 3kg

Product Description: original BMW workshop equipment high-performance surface sealant, thermally resistant, standard strength recommended by BMW! For all surface and flange seals in the engine, transmission, and drive area e.g. cylinder base gasket R1200 GS RT R..... Contents 35 ml 99.83 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For commercial users / professionals only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)