Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Alurack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker aluminum standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look will also be maintained in the long term. If needed, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please pay attention to the model-specific notes as well as the motorcycle manufacturer's specifications. Heavy luggage should generally be transported on the rear, rather than in the side cases or tank bag.) Usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions and model-specific notes) Luggage racks generally do not require ABE or registration Scope of delivery: Luggage rack + mounting materials + instructions For top case installation, only suitable for models with a universal plate.

The black backrest for the Vario top case increases passenger comfort, especially on longer trips. The foam pad is easy to install and fits perfectly on the corresponding top case. More comfort for the passenger Perfectly matched to the Vario top case Simple installation

The high-quality tail bag is specifically designed for attachment to the original luggage rack of the BMW R1200/1250GS. Made from coated Cordura fabric, it is water-repellent and durable. With a zipper and compression straps, it offers a variable volume of 15 to 25 liters. Vehicle-specific notes: in combination with the original luggage bridge.

Solid side carriers for the attachment of Hepco&Becker C-Bow side bags and cases High-quality surface finish Standard Hepco&Becker hard-shell cases, such as the Junior or Journey, do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the installation instructions, vehicle-specific notes, and motorcycle manufacturer specifications for any potential restrictions) Usually combinable without issues with top case carriers, sissy bars, or solo racks (please refer to the installation instructions or vehicle-specific notes for each carrier) Luggage bridge extensions may restrict bag mounting on the carrier Luggage carriers do not require ABE or registration in the documents Scope of delivery: left + right + installation instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Please ensure that the bags have sufficient distance from the exhaust and that the turn signals have an adequate radiation angle. The exhaust flow must not be directed at the bags.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

The fixed side case carriers from Hepco&Becker are securely connected to the motorcycle frame. Almost all touring side case systems from Hepco&Becker fit onto these carriers. The cases are securely attached to the carrier using a metal locking mechanism to prevent theft. Additionally, a lock adapter is required. This is usually included with the side cases. The lock adapter is screwed onto the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in case of a fall.The side case carriers from Hepco&Becker can usually be combined without any issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame high-quality surface finish Compatible with most Hepco&Becker hard-shell side cases (Please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Tube diameter: 16 mm

The slim, lightweight, and discreet luggage solution from Hepco&Becker. The Minirack offers a way to securely attach soft luggage to the rear of the motorcycle. Side slots allow for a backpack or bag to be strapped down. NOT suitable for top cases no ABE or registration required high-quality powder coating solid construction made in Germany

This is a used part offered Manufacturer: SW-Motech Condition: noticeable signs of use Description: sold as shown, with rain cover and top ring Part number: BC.TRS.00.103.30000 Volume expansion via zipper from 16 to 20 liters2 outer pocketsTo attach the PRO tank bag, you need the appropriate PRO tank ring for your motorcycle model.Magnetic guiding aid in the PRO tank ring for easy attachmentPre-mounted guide rail of the top ring for ergonomic adjustment of the tank bagTop and bottom of the tank bag made of laminated and shape-stable EVA materialMade of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coatingMOLLE attachment made of durable Hypalon material on the top for smartphone and tablet holdersReflective details for better visibilityMesh pockets insideWeather protection with included rain coverRobust carrying handleCable passage at the front and backCan be used with cable lock or anti-theft device

Simple and innovative at the same time - the BASIC Tank Ring This functional tank ring allows for the attachment of a tank bag from Hepco&Becker.Included in the delivery is a BASIC tank ring, as well as the counter holder, which can be individually screwed onto the tank bag depending on the tank shape and handlebar angle.The fuel cap can still be opened without any problems when the tank ring is mounted.In general, you only need this tank ring and a tank bag from H&B, and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is listed, you can also manually find out via the checklist here in the shop whether a universal tank ring is available for the desired model. (See main menu -> BASIC Tank Rings) FEATURES: absolutely secure hold, even at high speeds mechanical locking Easy operation the Hepco&Becker tank bag is simply placed on and audibly locked onto the tank ring thanks to a sophisticated mechanism Unlocking: The mechanism is unlocked by a strap in the direction of travel at the front of the tank bag; the tank bag is simply removed Simple yet effective mechanics Recommended maximum speed with mounted tank bag: 130 km/h (Please observe the motorcycle manufacturer's specifications, as well as the model-specific information in the instructions or here with the product) Recommended load in the tank bag: approx. 3kg Tank bag systems do not require ABE or registration in the papers in Germany. Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, the Basic tank ring locks purely mechanically compared to the Lock-it tank ring. The magnets assist with centering in the Lock-it tank ring. The difference lies solely in the two magnet or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Note: A tank bag with a Lock-it counter holder cannot be placed on a BASIC tank ring and vice versa. The tank bag counter holder and tank ring must be from the same system.

The Touratech tool box is the ideal solution for securely storing important small parts. Thanks to the optimal use of space on the vehicle, tools, first aid kits, puncture repair kits, or many other useful items can remain permanently and unobtrusively on the motorcycle. They are always within reach, even when the cases are not attached.The approximately 4.2-liter storage space is splash-proof and can be easily loaded and unloaded through a large opening, even with mounted cases. The lid can be completely removed for better loading, and a safety feature helps prevent loss.The perfect combination of stainless steel and plastic ensures optimal stability and an unparalleled appearance. Even when the cases are not mounted, it is a true gem!The box can be attached super quickly and easily to the luggage rack using special clamping brackets. A splash guard cap on the lock ensures lasting smooth operation.Quality "Made in Germany"- specifically designed for ZEGA Evo case systems- lockable and durable- important small parts always within reach- optimal use of space on the vehicle- splash-proofDimensions: 33 x 9.5 x 19.5 cmVolume: 4.2 litersMaterial: plastic, stainless steel

The brilliant bags for rain suits or spare gloves in a modern touring design!The crash bars of the BMW R1300GS are the ideal position for this little space miracle. Create additional storage space here that does not affect the handling of your GS in any way!The crash bar bags have been specifically designed for the Touratech fairing crash bars of your GS. The bags are simply slipped over the tank bars and secured with two Velcro straps.Dimensions: (L x W x H) approx. 25 x 36 x 7 cmVolume: approx. 2 x 3 litersSuitable for Touratech crash bars 035-5161 / 035-5163 and 035-5166 for BMW R1300GSThe completely newly developed soft luggage series Touring meets the desire of many touring riders for a straightforward and functional soft luggage setup. The excellent workmanship and high-quality Cordura® make the products of the Touring series long-lasting travel companions. The material has a premium feel and is water-repellent treated, so a few raindrops won't harm the contents. During the day, almost invisible in the modern design, the bright reflective applications provide a significant increase in safety in the dark.Robust and durable zippers complete the high-quality features of the new Touring series.

The Travel handlebar bag has been specifically designed to fit most motorcycle handlebars.In the small bag with a volume of approximately 2 liters, small items such as a mobile phone, keychain, or chocolate bar can be securely stored.In addition to the main compartment, the handlebar bag also features a small additional credit card pocket.The magnetic closure allows for quick access and closing of the lid. The water-protected zippers keep the contents secure in the bag.The new Travel soft luggage series combines practical functionality with a distinctive design. The bags are welded waterproof, and the particularly robust Cordura material ensures long durability. The highlight of this new luggage system is the hard shell lids, which provide additional robustness to the bags.Additionally, the lid features a Molle system, to which extra items can be attached. For passive safety and a distinctive look, reflective lettering ensures visibility.

Exclusive at Touratech: The perfectly fitting and high-quality inner bags are the ideal complement for the Vario cases of your new R1300GS!The bag has been specifically designed for the left Vario case of the BMW R1300GS and makes perfect use of the case's volume. With the 360-degree zipper, the storage space in the bag grows along with your case. The large main compartment offers space for clothing, camping gear, and other large items. Thanks to the cleverly positioned zipper, you have access to your luggage at any time, even when the bag remains in the Vario case. In the front and rear additional pockets, you can quickly store small items like charging cables, first aid kits, tools, or toiletries within easy reach.Upon arrival at your destination, simply leave the Vario cases on the vehicle, take the bag out, and store your helmet in it! With the robust and dirt-resistant material as well as the high-quality workmanship, the inner bags look great both at the campsite and in the hotel! The sturdy handles and the practical carrying strap make transporting the bags a breeze!

Exclusive at Touratech: The perfectly fitting and high-quality inner bags are the ideal complement for the Vario cases of your new R1300GS!The bag has been specifically designed for the right Vario case of the BMW R1300GS and makes perfect use of the case's volume. With the 360-degree zipper, the storage space in the bag grows along with your case. The large main compartment offers space for clothing, camping gear, and other large items. Thanks to the cleverly positioned zipper, you have access to your luggage at any time, even when the bag remains in the Vario case. In the front and rear additional pockets, you can quickly store small items like charging cables, first aid kits, tools, or toiletries within easy reach.Upon arrival at your destination, simply leave the Vario cases on the vehicle, take the bag out, and store your helmet in it! With the robust and dirt-resistant material as well as the high-quality workmanship, the inner bags look great both at the campsite and in the hotel! The sturdy handles and the practical carrying strap make transporting the bags a breeze!

Exclusive at Touratech: The perfectly fitting and high-quality inner bags are the ideal complement for the Variokoffer of your new R1300GS!The bag has been specifically designed for the Variotopcase of the BMW R1300GS and makes perfect use of the suitcase's volume. With the 360-degree zipper, the storage space in the bag grows along with your top case. The large main compartment offers space for clothing, camping gear, and even your helmet fits inside. Thanks to the cleverly positioned zipper, you have access to your luggage at any time, even when the bag remains in the top case.Upon arrival, simply leave your Variotopcase on the vehicle, take out the bag, and store your helmet in the case! With the robust and dirt-resistant material as well as the high-quality workmanship, the inner bags look great both at the campsite and in the hotel! The sturdy handle and the practical carrying strap make transporting the bags a breeze!

Easily accessible additional storage - the Vario top case of the BMW R1300GS provides the ideal base for this shape-stable lid bag.Perfect fit, appealing design, and effective utility characterize this additional bag. The four Velcro straps keep the bag securely in place. The all-around zipper makes it easy to load and unload the bag. The size is well thought out for all the little things that need to be quickly accessible, such as a safety vest, first aid kit, or snacks for a break, without significantly affecting aerodynamics.The Molle straps on the lid and the elastic band allow for additional securing of other small items if needed.Designed for the Vario top case of the BMW R1300GS, the lid bag also fits very well on our ZEGA Pro and Evo top cases.Dimensions: approx. 30 x 24 x 9 cmVolume: approx. 6 liters

The Touratech luggage rack has been designed in terms of both design and function specifically for the requirements of the R 1300 GS, as no aluminum cases and top cases are provided for this model from the factory. The motorcycle luggage racks form the basis for the diverse range of ZEGA aluminum luggage solutions for the new BMW Boxer GS! The same technology is applied to the luggage racks as is already used in the Touratech crash bars and the main frame of the BMW R1300GS: 3-dimensional shaped components. This type of construction ensures significantly higher stability while maintaining a lower weight!   The Touratech luggage rack derives its particularly high stability from the combination of 10,000-fold proven construction, highest quality materials, as well as from the patented connecting elements and 3D tabs. At the same time, the luggage rack incorporates the design of the rear frame of the BMW R 1300 GS. For the first time, the 18x2 mm stainless steel tubes are reinforced by 3D elements made of 2 and 3 mm thick stainless steel sheets! Not just an optical gain! The relatively low-mounted end silencer of the BMW R 1300 GS allows for a symmetrical setup and thus the use of the same case size on both sides of the motorcycle. Available are cases from the series ZEGA Mundo, ZEGA Pro, ZEGA Evo in all 3 sizes 31, 38, and 45 liters, as well as all Touratech side bags for luggage racks.   The installation is done at easily accessible existing mounting points. With just a few screws, the very robust construction can be mounted or dismounted for off-road use.   Your luggage is always safely with you with the Touratech motorcycle luggage rack, whether on-road or off-road, it makes no difference... The perfect luggage system for the great journey.   - made of electropolished stainless steel- also suitable for tough off-road use- no restriction for the passenger- fits elegantly into the overall look of the BMW- easy assembly / disassembly- total width approx. 50 cm

The Travel side bag, with its 40 liters of volume, is the ideal companion for your next motorcycle trip.Thanks to the robust click closures, easy access and secure closing of the hard shell lid is guaranteed. The proven roll closure under the lid keeps the contents safe and waterproof in the bag. The mesh pocket inside the bag holds small items.The new Travel soft luggage series combines practical functionality with a distinctive design. The bags are welded waterproof, and the particularly robust Cordura material ensures long durability. The highlight of this new luggage system is the hard shell lids, which provide additional robustness to the bags.Additionally, there is a Molle system on the lid, where extra items can be attached. For passive safety and a distinctive look, reflective lettering and also reflective sections behind the side Molle patches provide visibility.The handle allows for comfortable handling after removing the bag. The D-rings can be used to attach the optionally available carrying strap, so you can keep your hands free.The Travel side bag fits perfectly on most luggage racks made of 18 mm round tube - like our Touratech luggage racks. The completely newly developed locking mechanism allows for easy attachment and equally easy removal from the luggage rack. The bag stays securely in place. Thanks to the lock preparation, you can retrofit optionally available locks that match your Touratech cases, navigation mounts, oil plugs, etc. This way, the bag is protected against theft, and you can continue to use your Touratech locking system key.- Waterproof- Up to 40 liters of volume- High-quality workmanship made in the EU- Optional locks available- Optional carrying strap available- Quick to attach and quick to remove- Suitable for most straight luggage racks made of 18 mm round tube

This small, inconspicuous bag makes perfect use of the available space under the Touratech ZEGA Topcase carrier. The design of the top case carrier protects the contents of the bag like a cage. The large, forward-facing opening allows for safe loading and unloading of the bag. The volume of 5 liters is sufficient for all the little things you should always have on hand, such as a first aid kit, safety vest, wallet, or a small snack. Attachment is done using sturdy and easy-to-install Velcro straps. - certified Cordura fabric- high-quality inner lining in light gray- washable and easy to clean- best fit- secure and flutter-free attachment- low weight with high payload and large usable volume- Made in the EU- Delivery includes storage bag/multifunctional pouch (055-0555)Dimensions: approx. 23 x 24 x 9 cm; Volume: approx. 5 liters. Specifically made for Touratech ZEGA Topcase carriers 035-5455 / 035-5456!

The Touring tank bag is the centerpiece of our Touring series! Designed for the BMW R1300GS, it offers approximately 9 liters of luggage volume, which can be expanded to 14 liters via the all-around zipper. The "Touring" fits perfectly on the tank and does not interfere with the rider during any conceivable maneuver.The two outer pockets provide additional storage space. The tank bag easily withstands a downpour – for monsoon-like rain, the optional rain cover is recommended. Touratech's typical features, such as the prepared cable entry, the credit card pocket for toll stations, and the pen holder in the lid, are, of course, included.The proven attachment using click fasteners and Velcro keeps the tank bag securely in place and allows for quick refueling and easy mounting of the "Touring".The Molle straps are not just for decoration. Here, additional luggage can be secured, or the optionally available map case can be attached. Or use the reflective elastic cord to quickly secure accessible luggage or wet clothing. This way, you can customize your Touring to your liking.Specifically designed for the demands of touring, the Touring tank bag impresses with an enormous range of functions and practical details.• Play-free and stable hold on the vehicle• High-quality Cordura®• Washable and easy to clean• Reflective inserts, ergonomic, stable carrying handle• Easily expandable via all-around zipper• Molle system for additional luggage on the lid• Organizer with mini pocket for toll cards, credit cards, and loops for pens or small flashlights on the inside of the lid• Touratech-typical attachment with easy-to-use click fasteners and Velcro• Stable, play-free attachment at the back with a large Velcro fastener• Optional carrying strap for use as a shoulder bag• Water-protected, high-quality zippers• Elastic, reflective rubber cords with quick release for easy attachment of gloves or rain jackets• Rain cover available as an option• Practical, spacious side pockets• Large main compartment without dividers for maximum space and individual loading• Water-repellent cable entry for power supply to the interior• Includes storage bag/multifunctional pouch (055-0555)Please use a paint protection film if necessary!Dimensions: (L x W x H) approx. 37 x 27 x 22/32 cm;Volume: approx. 9/14 litersThe completely newly developed soft luggage series Touring meets the desire of many touring riders for a straightforward and functional soft luggage setup. The excellent workmanship and high-quality Cordura® make the products of the Touring series long-lasting travel companions. The material has a premium feel and is water-repellent treated, so a few raindrops won't harm the contents. During the day, almost invisible in the modern design, the bright reflective applications provide a significant increase in safety in the dark.Robust and durable zippers complete the high-quality features of the new Touring series.

The Travel tank bag has been specifically designed for the BMW R 1300 GS. It is probably the first model-specific tank bag for the GS.The Travel tank bag combines the advantages of the new Travel series with the proven Touratech mounting system. The combination of straps with click closure and Velcro allows for a secure attachment for off-road use while also enabling quick and convenient removal of the tank bag.The magnetic closure allows for quick access and closing of the lid. The water-protected zipper keeps the contents secure in the bag.With a volume of approximately 9 liters, it can hold everything that needs to be quickly accessible. The mesh pocket in the inner lid accommodates small items.The new Travel soft luggage series combines practical functionality with a distinctive design. The bags are welded waterproof, and the particularly robust Cordura material ensures long durability. The highlight of this new luggage system is the hard shell lids, which provide additional robustness to the bags.Additionally, there is a Molle system on the lid, where extra items can be attached. For passive safety and a distinctive look, reflective lettering and also reflective sections behind the side Molle patches ensure visibility.The handle allows for comfortable handling after removing the tank bag. The optional carrying strap can be attached to the D-rings, allowing you to keep your hands free.Delivery includes a storage bag/multifunctional pouch (055-0555)

Touratech also offers the proven luggage systems with ZEGA aluminum cases for the BMW R 1300 GS! Viva la Evolution!Continuous EVOLUTION - under this motto, we have further developed our ZEGA luggage systems, and thus the name of our latest aluminum case was established. The ZEGA Evo combines the proven robustness with extra comfortable handling - not least thanks to a completely new mounting system.The case as part of the luggage system:The ZEGA Evo was not developed as an isolated product, like all cases from Touratech before it, but is intended from the outset as part of a luggage system. The outstanding practical utility is the result of the unique combination of a beautifully designed yet indestructible case, a brilliant mounting mechanism, and a rugged carrier made of 18 mm thick stainless steel tubes. Matching inner bags and practical accessory holders complete the luggage system (available as an option).The advantages at a glance:- Newly designed plastic corners - protect the rider and case in the event of an accident- Proven mounting pins - for ZEGA Evo accessory holders- Proven handle - for comfortable carrying- Newly developed mounting system - for easy hanging and stable hold on the luggage rack- Newly developed lockable one-hand closure - for comfortable and secure fixation on the luggage rack - Newly developed lockable lid closure - for comfortable, two-sided opening and closing thanks to practical hinge function- Proven silicone seal - for dryness in the case even in pouring rain- Proven tie-down eyes - for secure attachment of case lid bags and other soft luggage- Standard hooks on the inside of the lid - for attaching accessories (bags, nets)Practical utility and user-friendliness:The ZEGA Evo offers even easier hanging with absolutely stable hold - even in tough off-road use! It combines optimal ergonomics and absolute comfort without compromising reliability. With the new lid closures, we have retained the popular hinge function. The lid can be opened from both sides or completely removed. The lid and bottom of the case are manufactured using modern deep-drawing processes, eliminating unsightly weld seams.The stable connection between the housing and bottom is ensured by high-quality, waterproof special rivets. The lid has a groove-spring profile with an integrated silicone seal that guarantees a waterproof closure. The newly developed ventilation relieves pressure in the case during altitude changes. This means you can open a case closed in the valley even on the highest mountain pass. Like its predecessor, the ZEGA Evo is also made from established 1.5 mm thick aluminum.The ZEGA Evo is already equipped with practical accessory mounting pins. This allows you to easily attach the special ZEGA Evo accessory holders without drilling holes in your new case. As with the previous versions, the proven tie-down eyes are standardly installed on the lid to securely attach special case lid bags or other items to your ZEGA Evo. The case is easy to transport thanks to the carrying handle.Whether silver or black anodized, the new ZEGA Evo once again sets the standard for high-quality luggage solutions in terms of design. The rounded, newly designed plastic corners are not just a decorative element. In the event of an accident, they protect both the case and the rider from injury.Newly developed mounting system:The core element of the ZEGA Evo is a completely newly developed and constructed mounting system on the luggage rack that combines easy handling with stable hold. The case remains securely attached to the motorcycle even under very high forces. The operation for hanging is super simple, the locking is equipped with a safety lock even without locking, and handling is even easy with the thickest gloves. Simply slide the hooks onto the rack and press the tension lever down until it clicks into place. The case can be additionally secured against theft with a lock on the rack. To remove, simply pull on the tension lever and lift the case off the rack. The mechanics work even under demanding conditions such as dirt, sand, mud, etc.Luggage rack:- Made of stainless 18 mm round steel tube reinforced with 3 mm thick, 3D-formed elements- Additional cross brace for more stability- Suitable for tough off-road use- Also suitable for all ZEGA Mundo, ZEGA Pro, and ZEGA Pro2 cases- Utilizes existing mounting points- Absolutely suitable for passengers- Elegantly integrates into the overall appearance Our luggage racks are made from robust and stainless 18 mm round steel tubes, ensuring particularly high stability even off the beaten path. An additional cross brace provides more stability, making the luggage system suitable for tough off-road use. Since the luggage rack utilizes existing mounting points, installation is super easy. Of course, we have considered that the luggage rack is just as practical for world travel as it is for everyday use. Therefore, we have ensured absolute passenger suitability.   Order now: ZEGA Evo lock set for 2 cases 01-050-6000-0 (Not included in delivery)

Touratech also offers the proven luggage systems with ZEGA aluminum cases for the BMW R 1300 GS! A robust and aesthetically pleasing aluminum case that handles all tasks from everyday use to adventure with ease. The ZEGA Mundo builds on the tradition of the legendary ZEGA Case.With the ZEGA Mundo luggage system, we provide a luggage solution for extreme use, backed by over 25 years of experience and thousands of test kilometers. Our ZEGA luggage systems are specifically designed for each motorcycle model, customized, and manufactured in Niedereschach, Germany, after thorough quality checks.Advantages at a glance:- Waterproof, dustproof, and extremely high-quality workmanship- Lightweight yet sturdy construction- Specifically developed for your motorcycle model- Luggage rack is bolted to existing mounting points- Quick assembly- Absolutely play-free fit of the cases even after thousands of off-road kilometers- Designed for extreme use- Elegantly integrates into the overall look- Automatic locking prevents accidental opening of the closures- Compatible with ZEGA accessoriesIn addition to the ZEGA Pro and ZEGA Evo luggage systems, we also offer the ZEGA Mundo luggage systems specifically for your motorcycle model. The reasons for choosing this system are as diverse as our customers themselves. Some appreciate the authentic, simple look of the legendary ZEGA Cases, which they find in the ZEGA Mundo. For others, the ZEGA Mundo luggage system is the entry into high-quality hard luggage solutions. What unites everyone is the desire for a luggage system that fits perfectly to the respective motorcycle model, is of high quality, and functions flawlessly even in extreme use.Of course, we have ensured that our ZEGA Pro luggage accessories are also compatible with the ZEGA Mundo. Since all our products are standardized, replacing individual parts is also no problem.Cases:- Body made of 1.5 mm thick aluminum- Designed for extreme use- Available with 31, 38, or 45 liters of volume- Proven high-quality, lockable stainless steel fittings- Ergonomically shaped mounting wheels inside the case- Tight and torsion-resistant- Play-free fit even after thousands of off-road kilometers- Quick assembly- Automatic locking prevents accidental opening of the closures- Installation locks can be easily retrofitted- Compatible with ZEGA accessories- Made in EUIn developing the ZEGA Mundo, the focus was one hundred percent on pure functionality. Practicality, robustness, and technically clear design are combined in this aluminum case.To achieve a connection with maximum strength, the indestructible body made of 1.5 mm thick aluminum sheet is connected to the one-piece aluminum base with special rivets. This concept also gives the case a significant increase in rigidity. Furthermore, an integrated, generously sized sealing tape ensures optimal sealing of the seam.The same applies to the specially shaped profile that forms the upper closure of the case body. It stiffens the case and, with the integrated sealing lip that fits snugly into the profile of the lid, ensures a weatherproof closure.Luggage rack:- Made of stainless 18 mm round steel tube, reinforced with 3 mm thick, 3D-shaped elements- Additional cross brace for more stability- Suitable for tough off-road use- Also suitable for all ZEGA Pro and ZEGA Evo cases- Utilizes existing mounting points- Absolutely passenger-friendly- Elegantly integrates into the overall lookOur luggage racks are made of robust and stainless 18 mm round steel tube, ensuring particularly high stability even off the beaten path. An additional cross brace provides more stability, making the luggage system suitable for tough off-road use. Since the luggage rack utilizes existing mounting points, assembly is a breeze.Of course, we have considered that the luggage rack is just as practical for world travel as it is for everyday use. Therefore, we have ensured absolute passenger-friendliness.