Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the appearance of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and run-overs high-quality technical workmanship made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle including mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

This is a new part being offered Vehicle: R1300GS + Adventure Manufacturer: BMW Condition: New Description: sold as shownPart number: 11127109366

The most comprehensive all-round protection ever for boxer engines!The Touratech Engine Crash Bar is there where it is needed to prevent damage!This also applies to the boxer engine of the BMW R 1300 GS with its favorable center of gravity but widely protruding cylinders. The high-load construction with its 4 independent mounting points forms a "cage" and completely encloses the components. This creates the most effective protection for cylinders, valve covers, and the sensitive lambda sensors! The 25x2 mm stainless steel pipes are for the first time supported by 3 mm thick, 3-dimensional formed stainless steel plates. These fit perfectly in both technology and design with the frame of the R1300GS. Because even there, the advantages of the formed plates with their significantly higher load capacity while maintaining low weight are utilized. The 3D formed plates of the Touratech Engine Crash Bar wrap protectively around the particularly vulnerable front area of the valve cover and secure it forward and to the side. By the way, it fits perfectly into the new flatter design language of the large "GS" and visually makes the crash bar a part of the motorcycle. The forces occurring in a fall or crash are safely absorbed, distributed and effectively redirected to suitable points of the construction and gently dissipated. Numerous predetermined bending points prevent overloads and thus protect the frame and engine. Made exclusively from robust electropolished stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their terror and can be easily polished out. The distance of the crash bars to the vehicle has been chosen to be as close-fitting as possible. There is no noticeable impact on ground or lean angle clearance, yet there remains enough space "to work". Installation is simple and quick through perfectly matched mounting points for the motorcycle. Complete mounting material is, of course, included in the delivery. In short: - complete protection of the cylinders, also to the rear and above - safe dissipation of occurring forces without damaging the frame and engine - no restrictions on lean angle or ground clearance - made from 25/2 mm stainless steel pipes and 3D formed components - Made in Germany TIP for perfect all-round protection: The ideal complement to the engine crash bar is our Fairing Crash Bar for the BMW R 1300 GS (035-5161).Also fits with "Option 719" / "Tramuntana".

Touratech Engine Crash Bar "Street" - the sporty protection for the cylinder and valve cover of your BMW R 1300 GS! The core of the Touratech Engine Crash Bar "Street" is the integrated sliding protection. This is perfectly contoured to the valve cover of the 1300 Boxer and positioned exactly where it needs to be! In the event of a "tip-over" or "slip," the bar absorbs the forces generated and distributes them gently. The sliding pad can support itself broadly against the valve cover in a serious situation. The close-to-engine routing of the bars ensures that ground clearance is not affected. The Touratech Engine Crash Bar "Street" is an effective combination of 25 mm thick electropolished stainless steel tubing and extremely durable plastic elements. In short: - effective protection for the cylinder and valve cover - efficient combination of electropolished stainless steel tubing and fiberglass-reinforced plastic sliding pads - lightweight, safe, and easy to install By reducing the lengths of the tubes, the weight has been reduced by almost 50%! (Weight compared to engine crash bar 035-5160)

Whether on-road or off-road, BMW has once again improved the true all-rounder with the R1300GS. However, the protection of the engine can still be individually optimized. With the Touratech Engine Guard Expedition, the heart of the machine is effectively protected, no matter where the journey leads.   Professional protection for engine and exhaust header. The Touratech Engine Guard "Expedition" offers optimal protection for your motorcycle. Dirt or stones kicked up by the front wheel do not reach the engine and header. Unpleasant damages, such as dents in the header or even holes in the engine block, are effectively avoided by the Touratech Engine Guard. For maximum stability, the multiple recessed contours in the 4 mm thick aluminum base plate play a key role. Additionally, the force of an impact is widely distributed thanks to the extra 3 mm stainless steel mounting plate on the engine. The ground clearance is not noticeably restricted. Thus, the Touratech Engine Guard *Expedition* is one of the most robust on the market.   Furthermore, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. Almost incidentally, they also prevent dirt from settling. This makes it easy to disassemble the engine guard even after heavy off-road use. Last but not least, the combination of a continuous underside and fiberglass-reinforced plastic rails facilitates the "sliding over" of stones, rocks, or tree stumps. A product that meets the highest technical demands and is visually an absolute highlight!   Details: - made from 4mm thick aluminum reinforced with 3mm thick stainless steel - best protection for engine and header - plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps. - ground clearance is hardly affected - designed for optimal force distribution - easy to install - complete mounting material included in the set - detailed installation instructions   All in all, the large Touratech Engine Guard for the BMW R 1300 GS is a product that meets the highest technical demands and is visually an absolute "highlight"!