JMP mirrors correspond in shape and function to the original part.They offer a very good price-performance ratio and a clean finish.The mirror glass has a reducing effect.Technical Data:Usage: Vehicle-specific Mirror Type: Stem mirror Mounting: Clamp mounting Mirror Head Shape: Rectangular Mirror Head Width: 140 mmMirror Head Height: 88 mmMounting Side: Left Total Width: 210 mmColor: Black Material: Plastic With Indicator: No E-approved: Yes

JMP mirrors correspond in shape and function to the original part.They offer a very good price-performance ratio and a clean finish.The mirror glass has a reducing effect.Technical Data:Usage: Vehicle-specific Mirror Type: Stem mirror Mounting: Clamp mounting Mirror Head Shape: Rectangular Mirror Head Width: 140 mmMirror Head Height: 88 mmMounting Side: Right Total Width: 210 mmColor: Black Material: Plastic With Indicator: No E-approved: Yes

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

Secure Hepco&Becker aluminum protection for the cardan shaft. Bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Includes mounting materials and instructions

Original BMW Spare Parts For all boxer models from 2013 (water-cooled) BMW Part Number: 33357708117, 33358556597 Fits the following vehicles:

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC)/R1250GS. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC)/R1250GS 2013-2023 with BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC)/R1250GS. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC)/R1250GS 2013-2023 without BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC). The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC) 2017 -2018 with BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring front for original shock absorber.- Replacement spring rear for original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

Original BMW Accessories for Installation on the Rear Axle Rear Axle Cover Additional Information

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 150N/mm Rear for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Replacement spring linear (55 N/mm) front for original shock absorber. - Replacement spring linear (150 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS Adventure models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS Adventure 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Linear replacement spring (60 N/mm) front for original shock absorber. - Linear replacement spring (158 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

Lowering Kit -20mm perfectly tuned to the original shock absorbers of the BMW R1200GS(LC). With this spring set, you achieve a sensible lowering of -20mm while maintaining consistently good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1200GS(LC). After the conversion, the suspension still offers good responsiveness and high safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.Info: Fits only for *BMW R1200GS(LC) 2017-2018 with BMW Dynamic ESA *Our recommendation: Have the conversion carried out by a specialist workshop.Scope of delivery:- Replacement spring -20mm front for original shock absorber.- Replacement spring -20mm rear for original shock absorber.- Installation instructions.Info: Side stand and center stand can be used without modifications.Do you have further questions? We are happy to advise you personally, please contact us

With the GS through knee-deep water - no problem. Unfortunately, not quite!A small inconspicuous valve on the final drive ensures the necessary ventilation and pressure equalization inside the housing. If the vent valve gets submerged, moisture can be sucked into the final drive, potentially damaging it.The solution to the problem: relocating the final drive vent to a protected position.Using two robust, aluminum-turned connection pieces and a durable hose, the valve can be easily relocated to a safe spot on the vehicle.An absolute MUST for any long-distance trip! compatible with: HP2 Enduro 2004 - 2006R 1150 GS 1999 - 2004R 1150 GS Adventure 2001 - 2006R 1150 R 2000 - 2006R 1200 GS 2003 - 2018R 1200 GS Adventure 2005 - 2018R 1250 GS 2018 - 2023R 1250 GS Adventure 2018 -R 1250 R 2018 -R 1250 RS 2018 -R 1300 GS 2022 -R nineT 2013 -

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in chassis technology for your BMW R1200GS equipped with BMW DDC. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride.   This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important Note: - We recommend replacing both the rear and front shock absorbers together with this suspension solution. - Only then can the best possible handling be achieved with this premium suspension.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber “Rear" - Ready for installation with connection plug and wiring.   The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.   Do you have further questions? We are happy to advise you personally contact us

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on any road surface, including off-road stages . This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important Note:- We recommend replacing both the rear and front shock absorbers together with this suspension solution.- Only then can the best possible handling be achieved with this premium suspension.Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber “Rear"- Ready for installation with connection plug and wiring. The basic setup here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted by us with a spring of higher spring rate to meet your needs. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally contact us

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS (LC) equipped with BMW DDC. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. This way, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for the various riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride.   This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this suspension is the high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any riding situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Scope of delivery: - Touratech Suspension DDA Plug & Travel front shock absorber - Touratech Suspension DDA Plug & Travel rear shock absorber - Ready for installation with connection plug and wiring.   The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. Thus, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for different riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this suspension is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any riding situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber- Touratech Suspension DDA Plug & Travel rear shock absorber- Ready for installation with connection plug and wiring. The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Replacement Springs by -20mm for BMW R 1250 GS LC ESA 2018 - 2022 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS with original factory lowering adjusted. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS. The suspension continues to offer good responsiveness and high safety in critical situations after the conversion. By replacing the springs front and rear, the balance of your motorcycle is maintained.   Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: Have the conversion performed by a professional workshop.   Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions.   Info: Side stand and center stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.                        

The Touratech Suspension Plug & Travel DSA EVO UP is a cost-effective and effective upgrade for the rear shock absorber of the BMW R1200GS / R1250GS with BMW Dynamic ESA. The clever part: The original electronic spring preload (EPA) and the spring are still used. Only the electronic damper is replaced with a high-quality component from Touratech Suspension. Another advantage of this clever suspension tuning is that the front Dynamic ESA shock absorber from BMW can be retained. If necessary, it can be replaced later with the Touratech Suspension Plug & Travel EVO shock absorber. The upgrade is the ideal alternative as a replacement for worn or defective original damper units or as a dynamic driving upgrade for more comfort and riding pleasure. In terms of ride comfort, reserves under load, and driving safety, we get the maximum out of the rear shock absorber of your GS with this electronic damper element. The semi-active shock absorber remains fully integrated into the motorcycle after the conversion and processes the data from the Central Function Unit (ZFE) directly. A complicated calibration of the electronics is not required. Operation is as usual via the standard switch units.   Benefit from the advanced features of the EVO series: The new electronic valve of the Plug & Travel EVO dampers processes the signals from the vehicle's own sensors with previously unattainable precision. Whether on the road, off-road, or on rapidly changing road surfaces – the suspension reacts in real-time to all eventualities. The Low Friction seal combines excellent durability with a low breakaway torque, ensuring a sensitive response in all driving situations. The new design of the Hyper Flow damper piston suppresses oil foaming even at very high damping speeds, ensuring consistent performance even under extreme loads. For easy pre-adjustment of the compression damping, the new EVO line features a conveniently operated rotary knob with an easily readable scale. This allows even less experienced users to reliably achieve individual and reproducible suspension setups. The progressive end stop gently slows down extreme compression movements for maximum comfort. Best durability thanks to minimal tolerances characterizes the high-quality uniball bearings. Their rubber seals are particularly pressure-resistant and effectively keep dirt and water out.   How does the Touratech Suspension Plug & Travel Upgrade work?   Please contact us via email [email protected] or by phone at 07728-9279-1555 We will find the optimal shock absorber upgrade for you together Option to send: We will arrange a date for you to send the rear standard Dynamic ESA BMW shock absorber to our Touratech Suspension Service Center. After your shock absorber arrives, the damping system will be converted within one working day. You will receive your upgraded shock absorber back as soon as possible. Option for complete assembly: You schedule a workshop appointment with us, and we will carry out the complete upgrade including installation and removal at a fixed price in our Touratech Suspension Service Center.   Top 10 Benefits of Touratech Suspension Plug & Travel EVO UP Cost-effective upgrade with the electronic Plug & Travel DSA EVO damper unit Continued use of BMW EPA and BMW spring Seamless integration into the vehicle Newly developed electromagnetic valve – patented worldwide New Hyper Flow damper piston Low friction seal Comfortable compression adjuster Special Touratech setup for rides with luggage End stop with progressive buffer High-quality uniball bearings Fully serviceable   Scope of delivery: - Touratech Suspension EVO Plug & Travel damper unit - Without BMW Dynamic ESA EPA / without spring.   These components are taken from your original BMW shock absorber. - ABE documents - Assembly instructions   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

The lowering by 50mm for your BMW R1200GS/R1250GS with BMW DDC auto-leveling equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adapts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -50mm- Touratech Suspension DDA Plug & Travel rear shock absorber -50mm- Ready for installation with connection plug and wiring. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS/R1250GS, the side stand and/or center stand must be adjusted.The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.