Water Cooler JMP   >>> Optimal Cooling Performance and Durability <<<   Advantages of JMP: -          Better cooling performance due to special fin technology -          Ideal for engines with high thermal loads -          Hand-welded, polished, and pressure tested -          Can be directly replaced with the OE cooler     When the engine runs, friction and heat are automatically generated. Therefore, the engine must be cooled as effectively as possible to avoid overheating. Water coolers consist of pipes and the fins in between. The coolant flows through these pipes. A continuous airflow cools the liquid and thus prevents the engine from overheating.   Water Cooler Variants: -          Mechanically assembled cooler -          Soldered cooler   Mechanically Assembled Cooler: -          Cost- and energy-saving production -          Round pipes fully inserted through the fins -          Small air gaps between pipes and fins -          Lower heat transfer / cooling performance   Soldered Cooler: -          Pipes and fins are soldered in ovens -          Creation of a metallic bond -          Optimal heat transfer -          Flattened pipes -          Larger cooling surface -          Up to 60% more cooling performance

Housing Thermostat Mahle

O-Ring CoolerTechnical Data:Range: No Inner Diameter: 17.5 mmOuter Diameter: 21.5 mmHeight: 2 mmMaterial: Rubber Design: round

A must-have for all off-road riders: The protective grids made of impact-resistant plastic effectively protect the radiator from damage caused by stones or brush in rough terrain. This practical addition is easy to install and also enhances the robust enduro look of the machine. Robust protection made of impact-resistant plastic. Easy installation thanks to "Plug & Play". A sensible addition for off-road use. For mounting on both sides.

Water Cooler JMP   >>> Optimal Cooling Performance and Durability <<<   Advantages of JMP: -          Better cooling performance due to special fin technology -          Ideal for engines with high thermal loads -          Hand-welded, polished, and pressure tested -          Can be directly replaced with the OE cooler     When the engine runs, friction and heat are automatically generated. Therefore, the engine must be cooled as effectively as possible to avoid overheating. Water coolers consist of pipes and the fins in between. The coolant flows through these pipes. A continuous airflow cools the liquid and thus prevents the engine from overheating.   Water Cooler Variants: -          Mechanically assembled cooler -          Soldered cooler   Mechanically Assembled Cooler: -          Cost- and energy-saving production -          Round pipes fully inserted through the fins -          Small air gaps between pipes and fins -          Lower heat transfer / cooling performance   Soldered Cooler: -          Pipes and fins are soldered in ovens -          Creation of a metallic bond -          Optimal heat transfer -          Flattened pipes -          Larger cooling surface -          Up to 60% more cooling performance

Temperature Sensor Original Spare Part

BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Discreet in appearance yet unmistakably in the Touratech style, the radiator guard made of laser-cut, black powder-coated stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steelColor: blackScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can also be secured with the included cable ties.Note: Covering the radiator can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.

BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Discreet in appearance yet unmistakably in the Touratech style, the radiator guard made of laser-cut, black powder-coated stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steelScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can additionally be secured with the included cable ties.Note: Covering the radiator can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and under full load. Please pay attention to your water temperature gauge.