The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

The frame protector made of black plastic effectively protects the frame from scratches and prevents wear spots caused by motorcycle boots. Frame protector made of polyamide Protects the frame from scratches Especially during heavy boot use off-road Color: black (textured) Fits the following vehicles: - R1200GS LC - R1200GS LC Adventure - R1250GS - R1250GS Adventure

Puig Touring Screen with Extension   Touring screens provide good protection against wind and weather. The head and upper body are relieved from wind pressure. This allows for relaxed riding even on long tours.  An installation guide and required brackets are included.   Attention:  Puig reinforcement 7566N for OE screen holder (to enable speeds over 140 km/h even with high screens) must be ordered separately!Technical Data:Height:   545 mmWidth:   585 mmDifference to Original Screen:   + 110 mmColor:   light smoke gray Manufacturer:   Puig

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Supplement to the skid plate Mounting on the original center stand Aluminum

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

Multi-X-Creen (MXC) complete screen with integrated adjustable spoiler. The Multi-X-Creen is a two-part screen, the end of which (spoiler) can be individually adjusted. This is outstanding both visually and functionally. After extensive test rides under various conditions, all our test riders - whose heights range from 1.70m to 1.98m - were able to find the perfect adjustment of the screen for their needs. Despite its understated appearance, the Multi-X-Creen screen offers excellent riding comfort.

Manufacturer: BMW Condition: NEW Description: sold as shown, D = 70mm Part Number: 51147721222 Fits:

BMW Center Stand Lowering - low The stable center stand ensures a secure position of the machine even on inclines and offers advantages when refueling, mounting luggage cases and top cases, or checking tire pressure. Additionally, the upright parked machine requires less space. Stable and secure stand. Facilitates refueling, loading, and tire pressure checks. Less space required when parking. No mounting parts required!

The stable main stand ensures a secure position for the machine even on slopes and offers advantages when refueling, mounting luggage cases and top cases, or checking tire pressure. Additionally, the upright parked machine requires less space. Stable and secure stand. Facilitates refueling, loading, and tire pressure checks. Less space required when parking. No mounting parts included!

The frame protector made of black plastic protects against scratches and prevents wear spots from motorcycle boots during tough off-road use. Effective protection made of impact-resistant plastic. Easy installation through plug and play. For left-side installation. Color: Black textured.

The frame protector made of black plastic protects against scratches and prevents wear spots from motorcycle boots during tough off-road use. Effective protection made of impact-resistant plastic. Easy installation through plug and play. For right-side installation. Color: Black textured.

The tinted Rallye windscreen has been specifically designed for off-road use. It is small enough to provide an unobstructed view of the terrain while still offering protection and sufficient freedom of movement when riding standing up. The enduro-specific look emphasizes the off-road potential of the machine. Windscreen for sporty enduro use. Unobstructed view of the terrain. More freedom of movement when riding standing up. Scratch-resistant coating. Customization of the vehicle. Dimensions L x W: approx. 310 x 225 mm

The original BMW windshield in clear is offered for K50 R1200GS LC and R1250GS. Part number: 46638404850

Frame plugs by Puig   To cover the openings in the frame for better aesthetics and to protect against dirt and water.

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Fits BMW R1200GS from 2017 (BMW engine protection bar = accessory) and BMW R1200GS-Adventure from 2017 (BMW engine protection bar = standard).Set for both sides!Can be combined with R1200GS-Adventure from 2017 with fairing crash bar extension 045-5165.Also fits the special model "Adventure Triple Black".

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.Fits only with original BMW side stands for lowered chassis.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlargement, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlargement a great look and full stability. With a secure attachment of the foot enlargement, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered chassis.Suitable for special model R1200GS "Rallye" with special equipment "Sport chassis".Attention: Regardless of the respective model year, different side stands have been installed, so we recommend additionally checking the shape of your side stand.Please use for: - Wide shape 1021-01-045-5276-0- Narrow shape 01-045-5275-0

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

Crash BarsThe robust stainless steel bars protect the engine and components from crash damage and scratches. The use of shot-blasted and electropolished stainless steel offers the advantage over coated steel that damage to the crash bars does not lead to a loss of corrosion resistance.Crash bars from SW-MOTECH provide the necessary added safety for the tank, fairing, and components. The elements specifically manufactured for the motorcycle type seamlessly integrate into the vehicle's appearance while offering optimal lean angle freedom. Tailored mounting elements allow for a sturdy and easy installation at original mounting points.Construction entirely from weather- and corrosion-resistant stainless steelHigh-quality appearance due to shot-blasted and electropolished surfacePipe diameter: 22 / 27 mmWall thickness: 2.5 mmReliable protection of important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and robust frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame mounting pointsScope of Delivery2 x Crash BarsDetailsMaterial: Stainless SteelSurface: ElectropolishedColor: SilverTotal Weight: Approx. 6.8 kgAttentionDoes not fit in conjunction with BMW OEM cylinder protection.Approval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Screen ReinforcementThe screen reinforcement from SW-MOTECH increases the contact area and provides additional stability to the GS windscreen. Fluttering and rattling noises of the windscreen are noticeably reduced, and vibration cracks are prevented. The screen reinforcement can be easily attached to the original mounts, and all adjustment options remain intact.Stabilizes the windscreenReduces vibration and noiseCompatible with original windscreen or screens from other manufacturersAdjustment options of the screen remain intactEasy installation on original mountsCan also be mounted in conjunction with BMW or SW-MOTECH navigation holdersScope of Delivery1 x Screen ReinforcementInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 0.5 kg

Engine Protection Extension for Main StandThe engine protection extension is mounted on the SW-MOTECH main stand of the BMW R1200GS / R1250GS and protects the spring leg steering during the ride.Easy installation on the SW-MOTECH main stand with two screws at existing points and two rubber-coated clampsExtension of the underbody protection against stone chipping and collisionScope of DeliveryEngine protection extension for main standInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmColor: silverTotal weight: approx. 0.6 kgWarningOnly with original BMW main standApproval NoteThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Engine Protection Extension for Main StandEngine protection extension for the main stand for BMW R 1200 GS LC, R 1200 GS Adventure, R 1200 GS Rallye, R 1250 GS, R 1250 GS Adventure.For attachment to the main standProtects the exhaust and rear swingarmExtension of the underbody protection against stone chips and collisionsScope of DeliveryEngine protection extension for the main standInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.30 cmSurface: powder-coatedColor: blackTotal weight: approx. 0.6 kgWarningOnly with original BMW main standApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.