For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

The BMW ConnectedRide Cradle Smartphone Holder is a mount that allows you to use your smartphone on your BMW motorcycle, particularly as a GPS. BMW part number: old 77521691964, new 77521542248 A connected BMW Connected Ride Cradle Smartphone Holder: With the BMW Motorrad Connected app (minimum version 4.0), you can view vehicle data while riding, such as: lean angle, acceleration, and deceleration. The connection and pairing are only performed once during the initial setup.If your motorcycle is equipped with a Multicontroller and the optional equipment "Onboard Computer Pro," additional functions can be utilized.When you connect your phone via Bluetooth (Bluetooth Low Energy version 4.2 minimum), you can use the application with the same controls as for the GPS Navigator VI.Once mounted on the holder, your phone will be charged, either via induction (according to Qi standard, 7.5 W max.) or via USB-C port (7.5 W, 1.5 A for 5 V). An LED display shows you the charging status, and this display can be turned off. BMW Cradle ConnectedRide Smartphone Compatibilities: The holder can be locked for additional security on compatible motorcycles.The Connected Ride Cradle BMW holder is compatible with older motorcycle models. It adapts to all models that have the preparation for GPS installed. Models with a Multicontroller have the option to retrofit the GPS preparation through the BMW Motorrad workshop system (except for the models BMW R1200RT, R1250RT, and K1600).The cradle cannot be attached to the 4-button GPS holder.It is compatible with smartphones with dimensions: minimum 130.1 x 65.5 x 6.9 mm; maximum 162.5 x 78.1 x 8.8 mm. The support sides are individually adjustable to optimally fit your smartphone. Especially during induction charging or to have an optimal and secure position, it may be necessary to remove the protective smartphone case if it is in the way.The holder is compatible with the following smartphones, for example:- iPhone: iPhone 7, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max- Samsung: Galaxy A3, Galaxy A8, Galaxy A8 Plus, Galaxy A9, Galaxy S8, Galaxy S8 Plus, Galaxy S9, Galaxy S9 Plus, Galaxy S10, Galaxy S20, Galaxy S21 Ultra 5G, Galaxy S20 FE, Galaxy Note 8, Galaxy Note 9, Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 20 Ultra- Huawei: P20, P30- Google: Pixel 2 XL- HTC: Le More information about the BMW Motorrad Smartphone Holder: The holder has a total weight of 204 g, with the following dimensions: L: 94.8–111.85 mm x W: 144.07–180.47 mm x H: 41.02 mm. Therefore, it does not interfere with your riding or handling of the vehicle.The BMW Motorrad Smartphone Holder ConnectedRide Cradle is protected against environmental and weather conditions according to IP65 standard, making it dust and water-resistant. Ensure that your smartphone is also resistant to these elements in bad weather.Designed for use with a smartphone, the holder naturally protects your phone from motorcycle vibrations. Compatible motorcycle modelsC 400 GT - K08 - (0C06 0C16) - [2018-2020] C 400 GT 21 - K08 - (0C61, 0C63) - [2021-2022] C 400 X - K09 - (0C09 0C19) [2018-2020] C 400 X 2021 - K09 - (0C31, 0C33) [2021-2022] F 750 GS - K80 - (0B08 0B18) [2016-2022] F 850 GS - K81 - (0B09 0B19) - [2016-2022] F 850 GS ADVE - K82 - (0K01 0K03) - [2017-2022] F 900 R - K83 (0K11, 0K13) - [2019-2022] F 900 R A2 - K83 - (0K31) - [2018-2022] F 900 XR (0K21, 0K23) - [2019-2022] F 900 XR A2 - K84 - (0K41) - [2019-2022] S 1000 R - K63 - (0E51, 0E53) - [2021-2022] S 1000 XR - K49 - (0D03 0D13) - [2014-2019] S 1000 XR - K69 - (0E41 0E43) - [2019-2022] R 1200 GS 2013 - K50 - (0A01 0A11) - [2012-2016] R 1200 GS 2017 - K50 - (0A51 0A61) - [2016-2019] R 1200 GS Adve 2014 - K51 - (0A02 0A12) - [2013-2018] R 1200 R 2015 - K53 - (0A04 0A14) - [2014-2018] R 1200 RS - K54 - (0A05 0A15) - [2014-2018] R 1250 GS - K50 - (0J91 0J93) - [2018-2020] R 1250 GS 2021 - K50 - (0M01, 0M03) - [2020-2022] R 1250 GS Adve - K51 (0J51 0J53) - [2018-2020] R 1250 GS Adve 2021 - K51 - (0M11, 0M13) - [2020-2022] R 1250 R 2019 - K53 - (0J71 0J73) - [2018-2022] R 1250 RS 2019 - K54 - (0J81 0J83) - [2018-2022]

The BMW ConnectedRide Cradle Smartphone Holder is a mount that allows you to use your smartphone on your BMW motorcycle, particularly as a GPS. BMW part number: old 77521691964, new 77521542248 A connected BMW Connected Ride Cradle Smartphone Holder: With the BMW Motorrad Connected app (minimum version 4.0), you can view vehicle data while riding, such as: lean angle, acceleration, and deceleration. The connection and pairing are only performed once during the initial setup.If your motorcycle is equipped with a Multicontroller and the optional equipment "Onboard Computer Pro," additional functions can be utilized.When you connect your phone via Bluetooth (Bluetooth Low Energy version 4.2 minimum), you can use the application with the same controls as for the GPS Navigator VI.Once mounted on the holder, your phone will be charged, either via induction (according to Qi standard, 7.5 W max.) or via USB-C port (7.5 W, 1.5 A for 5 V). An LED display shows you the charging status, and this display can be turned off. BMW Cradle ConnectedRide Smartphone Compatibilities: The holder can be locked for additional security on compatible motorcycles.The Connected Ride Cradle BMW holder is compatible with older motorcycle models. It adapts to all models that have the preparation for GPS installed. Models with a Multicontroller have the option to retrofit the GPS preparation through the BMW Motorrad workshop system (except for the models BMW R1200RT, R1250RT, and K1600).The cradle cannot be attached to the 4-button GPS holder.It is compatible with smartphones with dimensions: minimum 130.1 x 65.5 x 6.9 mm; maximum 162.5 x 78.1 x 8.8 mm. The support sides are individually adjustable to optimally fit your smartphone. Especially during induction charging or to have an optimal and secure position, it may be necessary to remove the protective smartphone case if it is in the way.The holder is compatible with the following smartphones, for example:- iPhone: iPhone 7, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max- Samsung: Galaxy A3, Galaxy A8, Galaxy A8 Plus, Galaxy A9, Galaxy S8, Galaxy S8 Plus, Galaxy S9, Galaxy S9 Plus, Galaxy S10, Galaxy S20, Galaxy S21 Ultra 5G, Galaxy S20 FE, Galaxy Note 8, Galaxy Note 9, Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 20 Ultra- Huawei: P20, P30- Google: Pixel 2 XL- HTC: Le More information about the BMW Motorrad Smartphone Holder: The holder has a total weight of 204 g, and its dimensions are: L: 94.8–111.85 mm x W: 144.07–180.47 mm x H: 41.02 mm. Therefore, it does not interfere with your riding or handling of the vehicle.The BMW Motorrad Smartphone Holder ConnectedRide Cradle is protected against environmental and weather conditions according to IP65 standard, making it dust and water-resistant. Ensure that your smartphone is also resistant to these elements in bad weather.Designed for use with a smartphone, the holder naturally protects your phone from motorcycle vibrations. Compatible motorcycle modelsC 400 GT - K08 - (0C06 0C16) - [2018-2020] C 400 GT 21 - K08 - (0C61, 0C63) - [2021-2022] C 400 X - K09 - (0C09 0C19) [2018-2020] C 400 X 2021 - K09 - (0C31, 0C33) [2021-2022] F 750 GS - K80 - (0B08 0B18) [2016-2022] F 850 GS - K81 - (0B09 0B19) - [2016-2022] F 850 GS ADVE - K82 - (0K01 0K03) - [2017-2022] F 900 R - K83 (0K11, 0K13) - [2019-2022] F 900 R A2 - K83 - (0K31) - [2018-2022] F 900 XR (0K21, 0K23) - [2019-2022] F 900 XR A2 - K84 - (0K41) - [2019-2022] S 1000 R - K63 - (0E51, 0E53) - [2021-2022] S 1000 XR - K49 - (0D03 0D13) - [2014-2019] S 1000 XR - K69 - (0E41 0E43) - [2019-2022] R 1200 GS 2013 - K50 - (0A01 0A11) - [2012-2016] R 1200 GS 2017 - K50 - (0A51 0A61) - [2016-2019] R 1200 GS Adve 2014 - K51 - (0A02 0A12) - [2013-2018] R 1200 R 2015 - K53 - (0A04 0A14) - [2014-2018] R 1200 RS - K54 - (0A05 0A15) - [2014-2018] R 1250 GS - K50 - (0J91 0J93) - [2018-2020] R 1250 GS 2021 - K50 - (0M01, 0M03) - [2020-2022] R 1250 GS Adve - K51 (0J51 0J53) - [2018-2020] R 1250 GS Adve 2021 - K51 - (0M11, 0M13) - [2020-2022] R 1250 R 2019 - K53 - (0J71 0J73) - [2018-2022] R 1250 RS 2019 - K54 - (0J81 0J83) - [2018-2022]

BMW Mounting Parts for Navigator IV Navi 4 Original Packaging Item Description This offer includes the mounting parts for the Navigator IV.

The mounting adapter is simply attached to the handlebar clamps of your BMW. All of our GPS mounts fit perfectly on its 12 mm strut. This allows you to easily and securely attach your GPS device. The view of the instruments remains unobstructed.Mounting adapter / GPS mount / Navigation device holder

Mounting bracket / base mount for the zumo 340/ 345/ 350/ 390/ 395 for attachment to the motorcycle.Replacement mounting bracket compatible with the zumo 340/ 345/ 350/ 390/ 395. - To attach to the handlebar, you will need "optional" accessories from RAM and/or our Touratech handlebar mount.- With the optional Garmin connection cable (01-065-0418-0), the zumo 340/ 345/ 350/ 390/ 395 can also be connected to the electrical system of your motorcycle.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

The ride of your life with the zumo® XT2 and the best motorcycle navigation from Garmin ever. Discover unforgettable tours and diverse routes along popular motorcycle roads, featuring MICHELIN Scenic Roads and Garmin Adventurous Routing™. Our brightest and largest zumo® display is easy to read in all conditions. Connect with other bikers via the Tread® App, share your ride dynamics and GPX data, or create Group Rides for shared trips. With real-time information on weather and traffic, as well as excellent connectivity through Bluetooth calling and Smart Notifications, you’ll always stay up-to-date. Pair your zumo® XT2 with the inReach® Mini 2 (sold separately) for global satellite communication or use the interactive SOS emergency call in case of an emergency.HighlightsRobust motorcycle navigation with a bright 6-inch (15.2 cm) HD displayVisual route planner - including Garmin Adventurous Routing™,MICHELIN Scenic Road, and popular motorcycle routesCompatible with Tread® App, including Group Ride MobileRide summary with data on your ride dynamicsMICHELIN Green Guide, Trendy Places, and Local SpotsGarmin real-time services for traffic, weather, and fuel pricesSmart & Connected - notifications, calling, and moreAccident notification via Tread® App and mobile connectionCompatible with inReach® and Garmin Powerswitch™Included in deliveryzumo® XT2Motorcycle mountMounting kitMotorcycle connection cableUSB cableDocumentation

TomTom Mount for Your BMW R1200GS Adventure LC With this mount, you can easily and securely attach the original TomTom holder to the bracket above the speedometer. Our mount is suitable for bracket diameters of 12mm and 16mm. The integrated grooves ensure that the mount is securely fixed to the bracket (light mounting traces may occur). The mount is compatible with all TomTom Rider motorcycle navigation devices. made from high-strength aluminum CNC machined black anodized complete with all mounting materials easy installation Made in Germany Delivery includes: Mount upper and lower part 2 pcs. mounting screws for the mount 4 pcs. mounting screws for the TomTom holder Attention, only the mount with screws is delivered, not the navigation device and/or accessories! Usage list: R1200GS Adventure LC all models with a bracket above the speedometer (some special accessories, please check if available!)

The 4-button mount cradle allows for easy attachment and operation of the BMW motorcycle navigator. Important functions such as replaying the last voice output, adjusting the map scale, and changing the view can be easily controlled while riding using the four outer buttons of the cradle, without needing to directly operate the touch screen of the BMW motorcycle navigator. This increases the ease of use and safety of the motorcycle. Easy attachment of the BMW motorcycle navigator within the driver's line of sight. Operation using four outer buttons. Increases ease of use and safety. For motorcycles without navigation preparation. Electrical connection option for the navigation device. Compatible with Navigator VI and Navigator V. Scope of delivery: BMW motorcycle 4-button mount Mounting materials for installation on vehicle-specific holder for BMW motorcycle navigation devices Without navigator!

The charging socket with 12-volt voltage allows the supply of external power consumers. With the BMW USB charger, external navigation devices, music players, or mobile phones can be powered or charged even while riding. Additional Information: Fits the following vehicles: G 310 GS G 310 R C 400 GT R nine T R nine T Pure R nine T Scrambler R nine T Urban G/S R 1200 GS LC R 1250 GS R 1200 GS LC Adventure R 1250 GS Adventure S 1000 R S 1000 RR from 2019 M 1000 RR S 1000 XR F 750 GS F 850 GS F 850 GS Adventure

With the retrofit preparation for the navigation device, motorcycles without navigation preparation can be retrofitted accordingly. The navigation preparation with holder and mount cradle for the instrument cluster integrates the BMW Navigator neatly into the cockpit and thus into the direct line of sight of the rider. The navigation system is secured against theft, and operation is conveniently done via the multi-controller on the handlebar. Retrofit preparation for navigation device. Secure mounting for BMW motorcycle navigator. Complete integration into the cockpit. Perfect positioning in the rider's line of sight. Operation via multi-controller on the handlebar. Theft protection, as the navigation device can be locked.

Intuitively applicable and ultra-robust: Get a high-quality smartphone mounting solution for your handlebars with the SP Connect™ Moto Mount Pro. The mount can be installed on standard or oversized handlebars and is flexibly adjustable by 360°. This way, your phone is optimally positioned within your field of vision.You decide whether to use it in landscape or portrait mode. Use your smartphone even during motorcycle rides, for example, for navigation, and keep an eye on the route at all times. Maximum safety and practical usability.        ✔  CNC-machined from aircraft-grade aluminum        ✔  Landscape or portrait mounting        ✔  360° adjustability in 6° increments        ✔  Suitable for standard and oversized handlebarsThe Moto Mount Pro can be mounted on standard and oversized handlebars with diameters of 2.22 / 2.54 / 2.86 / 3.17 cm or 0.875 / 1.0 / 1.125 / 1.25 inches.Note: For smartphones with mechanical image stabilization, we recommend using the Moto Mount Pro in conjunction with the vibration-dampening Anti Vibration Module. This helps prevent potential damage to your camera caused by vibrations from motorcycle engines. If you are unsure or experience issues with your phone, please do not use the product in combination with this smartphone and contact your smartphone manufacturer.

Adrenaline in your blood. The sound of the engine in your ears. The feeling of freedom as you ride through impressive, winding landscapes. And from now on, you can also keep your phone and route reliably in view. With the SP Connect™ Moto Bundle, your riding experience becomes even more versatile.The Moto Bundle includes all the components you need to quickly and securely attach your phone to the handlebars of your machine. Focus on what matters and enjoy even more flexibility on your rides.        ✔  Mounting on the handlebars of your motorcycle        ✔  Quick and secure locking with a 90-degree rotation        ✔  Maximum smartphone protection on the go    Setting up your Moto Bundle:Thanks to easy installation, the mount included in the Moto Bundle can be quickly attached to the standard or oversized handlebars of your motorcycle, and you can secure your SP Connect™ Case in just one second. A simple 90° rotation and your phone is held securely. Depending on your desired setting, the mount can be installed in both landscape and portrait orientation.    The Moto Bundle includes the following components:    Phone Case        Slim, protective, functional        Access to all ports and buttons        3-layer construction for ultimate protection        QI charging possible¹    & Weather Cover (not included in universal variants)        Protects against rain, sweat, dust, and mud        Provides additional shock resistance    or Universal Phone Case        Universal pouch for smartphones in 2 sizes (M or L)        M: 70x153 mm / L: 80x165 mm        Protects against rain, sweat, dust, and mud        Access to all ports and buttons        Touchscreen operation possible    or Universal Interface        3M™ adhesive film        Secure and flat interface        Size: 66 x 55 mm (2.6 x 2.17 inches)    or Universal Phone Clamp        Integrated mounting mechanism        Simple and secure closure system        Touchscreen and button operation remains possible        Tool-free size adjustment from 58-85 mm    Moto Mount Pro        CNC machined from aircraft aluminum        Landscape or portrait mounting        Super stable 360° adjustment in 6° increments        Suitable for standard and oversized handlebars (2.22 / 2.54 / 2.86 / 3.17 cm or 0.875 / 1.0 / 1.125 / 1.25 inches in diameter)Note: If you are using a smartphone with a mechanical image stabilizer, we recommend using our additional vibration-damping module, the Anti Vibration Module, to best prevent potential damage to your phone's camera caused by vibrations from motorcycle engines. If you continue to have issues and are unsure, please do not use the product in combination with this smartphone and contact your smartphone manufacturer.Note: For optimal touchscreen functionality with the Weather Cover, we recommend avoiding strong screen protectors or gloves. The Weather Cover restricts the home button functionality of iPhone SE (2020), 8, 8 Plus, 7 & 7 Plus. This can be bypassed by activating the software home button (Assistive Touch) feature.    ¹Wireless charging of the iPhone 12 series in combination with the SP Connect Phone Case is possible with a variety of inductive chargers. The best results are achieved when the components of the USB cable and power supply meet the QC 3.0 standard (Quick Charge 3.0) or higher. Inductive charging with the Apple MagSafe charger is not possible.

Navigation Mount in the CockpitTo achieve optimal positioning, a powder-coated steel plate secures the stable attachment of the navigation mount to original mounting points in the cockpit.Clever positioning, vibration damping, and easy removal: these are combined in the vehicle-specific navigation mounts. The swiveling mount can be removed with one hand and provides secure support for many current navigation devices, as well as Navi Case Pro device bags and smartphone hard cases from SW-MOTECH, thanks to its universal hole pattern. An integrated damping system protects the hardware from shocks.Easy installation on existing mounting points in the cockpitNavigation mount made of black powder-coated steel with QUICK-LOCK mechanism made of fiberglass-reinforced plasticTailored to the motorcycle model for optimal positioningRemovable, swiveling, and vibration-dampedMounting plate with universal hole pattern provides secure support for standard navigation models and Navi Case Pro device bags or hard cases from SW-MOTECHScope of Delivery1 x Navigation Mount in the CockpitInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: Black / BlackTotal Weight: Approx. 0.7 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Form and function form a unity.To meet the design, haptics, and design language of the Samsung Galaxy S5/S6/S6 Edge/S7, the components have been reduced to the essentials. The shapes and technical components are designed for maximum stability despite their delicate execution. UV-resistant silicone rings provide the necessary tension for the intelligent 3D locking mechanism. The Samsung Galaxy S5 is housed in highly stable, device-friendly plastic corners. This precision locking contour, custom-made for the Samsung Galaxy S5, integrates the device completely play-free into the handlebar mount. The operation of the Samsung Galaxy S5 remains fully intact.The important compact:- 3D locking mechanism with one-handed operation- CNC laser-cut and CNC bent stainless steel components.- Precision locking contour specifically tailored for the Samsung Galaxy S5/S6/S6 Edge/S7.- Touratech iBracket plastic corners with UV-resistant silicone rings.- Touratech vibration decoupling- iBracket handlebar mount rotatable by 90°- iBracket handlebar mount for bicycle handlebars.- iBracket handlebar mount suitable for motorcycle useHandlebar mount "iBracket" for Samsung Galaxy S5/S6/S6 Edge/S7 also compatible with:- Sony Xperia M2- Samsung A5- Nokia Lumia 930- Nokia Lumia 1020- Nokia Lumia 830- click here for more information- Together with our GPS mounting adapters, this handlebar mount can be used on almost all motorcycles. - The mount can also be used with common silicone protective cases for the Samsung Galaxy S5/S6/S6 Edge/S7.The device shown in the images is not included in the delivery of the mount.

The Touratech handlebar mount for the zumo 590 / 595 LM is designed to resemble a hand that envelops, holds, and protects the zumo. With ingenuity and high technical know-how, our developers have created this lockable handlebar mount that can be quickly and easily locked and unlocked. The zumo 590 / 595 LM retaining claw with power supply is integrated into this Touratech motorcycle mount. The Garmin zumo is first inserted into the pre-assembled Garmin power supply. Then, the spring-loaded locking wings are compressed to securely and tangibly snap into place. The mount can now be locked using the integrated locking cylinder. The mount is designed so that the device can be turned on and off while secured in the locked mount. The handlebar mount can be ordered to match existing Touratech accessories.Like all Touratech handlebar mounts, this high-quality zumo 590 / 595 LM mount is manufactured by us in the Black Forest. Garmin zumo 590 / 595 LM handlebar mount features:- This Touratech handlebar mount is specifically designed for the Garmin zumo 590 / 595 LM devices.- The motorcycle cradle with power supply included with the zumo is integrated.- Laser-cut and CNC-bent aluminum and stainless steel parts ensure stability and precision.- Holds and secures the Garmin zumo 590 / 595 LM precisely while protecting the power supply pins.- The handlebar mount stabilizes and secures the Garmin zumo even in rough riding situations.- Protects the Garmin zumo through the proven Touratech vibration isolation.- Utilizes the unique new, spring-loaded Touratech locking wings.- Prevents unwanted or accidental opening of the original Garmin motorcycle cradle.- The Garmin zumo 590 / 595 LM can be quickly and easily inserted or removed from the mount.- The Touratech Garmin zumo 590 / 595 LM handlebar mount is lockable.- The zumo 590 / 595 can be turned on and off while in the mount.- Mounting clamp for 12mm tubes included.- The handlebar mount can be used with our optional Touratech mounting adapters.- Can be combined with the RAM ball joint system included with the zumo.The GPS Garmin zumo 590 and the Garmin motorcycle cradle shown in the images are not included with the Touratech mount.

The Touratech handlebar mount for the zumo 590 / 595 LM is designed to resemble a hand that envelops, holds, and protects the zumo. With ingenuity and high technical know-how, our developers have created this lockable handlebar mount that can be quickly and easily locked and unlocked. The zumo 590 / 595 LM mounting claw with power supply is integrated into this Touratech motorcycle mount. The Garmin zumo is first inserted into the pre-mounted Garmin power supply. Then, the spring-loaded locking wings are compressed to securely and tangibly snap into place. The mount can now be locked using the integrated locking cylinder. The mount is designed so that the device can be turned on and off while secured in the locked mount. The handlebar mount can be ordered to match existing Touratech accessories.Like all Touratech handlebar mounts, this high-quality zumo 590 / 595 LM mount is manufactured by us in the Black Forest. Garmin zumo 590 / 595 LM handlebar mount features:- This Touratech handlebar mount is specifically designed for the Garmin zumo 590 / 595 LM devices.- The motorcycle cradle with power supply included with the zumo is integrated.- Laser-cut and CNC-bent aluminum and stainless steel parts ensure stability and precision.- Holds and secures the Garmin zumo 590 / 595 LM precisely while protecting the power supply pins.- The handlebar mount stabilizes and secures the Garmin zumo even in rough riding situations.- Protects the Garmin zumo through the proven Touratech vibration isolation.- Utilizes the unique new, spring-loaded Touratech locking wings.- Prevents unwanted or accidental opening of the original Garmin motorcycle cradle.- The Garmin zumo 590 / 595 LM can be quickly and easily inserted or removed from the mount.- The Touratech Garmin zumo 590 / 595 LM handlebar mount is lockable.- The zumo 590 / 595 can be turned on and off while secured in the mount.- Mounting clamp for 12mm tubes included.- The handlebar mount can be used with our optional Touratech mounting adapters.- Can be combined with the RAM ball joint system included with the zumo.The GPS Garmin zumo 590 and the Garmin motorcycle cradle shown in the images are not included with the Touratech mount.

The BMW Navigator handlebar mount has been specifically designed for use on motorcycles. The basic mount included with the BMW Navigator, featuring the power supply bar and side control buttons, is integrated into the Touratech handlebar mount. When using only the original BMW basic mount, the Navigator IV, V, and VI are not sufficiently protected against vibrations that occur specifically on motorcycles. Another feature of our handlebar mount is the secure locking mechanism for the BMW Navigator IV, V, and VI in the motorcycle mount.The device is particularly protected against:- Severe potholes, off-road edges- Careless touching of the original lock.- Accidental unlocking of the BMW Navigator IV, V, and VI due to dynamic driving influences.- Vibrations that occur specifically from motorcycle engines are eliminated by the Touratech decoupling.- Terrain influences from poor roads or off-road tracks are eliminated by the Touratech decoupling.The Touratech handlebar mount for BMW Navigator IV, V, and VI, facts:- Mounting on 12mm center struts or the ball-joint adapter included with the Zumo is possible.- The genuine Touratech vibration decoupling is implemented.- The special TT mechanism secures the BMW Navigator unlocking mechanism. Everyday usability remains fully intact.- Laser-cut and CNC-bent aluminum parts (anodized) ensure stability and precision.- The special TT design improves the device's attachment in the original mount through fixation and decoupling elements.- We offer you these lockable variants. This protects the device from quick access during short stops.- The Touratech handlebar mount is specifically tailored to the BMW Navigator IV, V, and VI and developed for this purpose.The BMW Navigator V and the BMW motorcycle cradle shown in the images are not included with the Touratech mount.

The windshield of the GS appears very unstable, which can lead to irritation and dangerous distractions over time. This mounting adapter effectively stabilizes the windshield and replaces the original BMW GPS holder. The bracket is wide enough to allow for the positioning of a GPS device according to individual preference. This way, your GPS device finds an optimal place above the instruments of your BMW.The installation of the windshield reinforcement is done at the original mounting points, and the height adjustment remains intact.Compatible with original BMW and Touratech windshields.