Footpeg Extension for All AdventurersThe footpeg plate widens your peg by 80 mm, allowing you to stand securely on your peg even while riding. It can be quickly and easily bolted on and fits all BMW GS models.Delivery includes: 2 pieces for left and rightavailable in blue and black. All items have been mounted and tested on original motorcycles - without any modifications.

BMW R1200GS R 1200 GS LC 2013 Pillion Fußrastentieferlegung adjustable 60 mm deep incl. ABE Fußrastentieferlegung passenger adjustable for BMW R1200GS LC from Bj. 2013 R1200GS LC Adventure from Bj. 2014 With the new footrest adapter for your BMW no wish remains unfulfilled. As diverse as the adjustment is, its possible uses. The adapter in its basic form fits 98% of each motorcycle model. The optimal leg angle is 90 °. A registered knickter leg gusset folds also the bloodstream, thereby not receiving the leg with sufficient oxygen. Thus, the dreaded Krampfadern.Der adapter arise brings the detent 60 mm deep. In general, the basic adapter up or down can be mounted. After assembly, the adapter can be adjusted to each every 4 ° that the footrest is moved vertically downwards. The passenger comes even to enjoy, to adjust the latch to the side, if there is enough space. Thus the kit, for example, the perfect complement for a motorcycle seat. This is where the feet are always right on the catches. Depending on how the passenger reaches a healthy and comfortable leg position. As with all adjustable products also the footrest adapter for its distinguished "fast" adjustability. With a few simple steps and an Allen key, the adapter, for example, from "high to low" You verstellt.Bedenken note that a lowering of the footrest means less inclined position. The advantage of the adapter that the original remains footrest. All articles were of original motorcycles - without external modifications - assembled and tested.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Stable Footpeg for BMW R1200GS from 2013 and R1250GS LCincluding ABE The new footpeg for the BMW R1200GS from 2013 and BMW R1250GS is 40 mm lower than the original, and 45 mm wide, but does not extend further outward. It is more stable and suitable for those who ride a lot while standing. The stable footpeg is available in silver and black.Please select when ordering.All items have been mounted and tested on original motorcycles - without any modifications.

The black anodized shift lever can be adjusted to the rider's shoe size and offers more comfort when riding while standing. The footpeg is adjustable with a screw, allowing the distance between the footpeg and footrest to be customized. This way, riding pleasure is not compromised even for those with larger feet. Footpeg adjustable in longitudinal direction using a screw Variable distance between footpeg and footrest Better operability when riding while standing Individual adjustment to shoe size Color: Black anodized. Additional Information:

The Enduro footpegs feature a 2 cm wider and 1.2 mm longer standing surface, providing more grip and a slip-resistant stance in off-road conditions. They are also perfectly matched to the typical tread sole of enduro boots. This allows for even better vehicle control, especially when riding off-road while standing. Since the height of the easily mountable Enduro footpegs corresponds to the standard series, the operability of the shift and brake pedals is not restricted. More grip and slip-resistant stance. Better vehicle control. Advantages when off-road riding while standing. Easy installation. Scope of delivery: Set of Enduro footpegs

The set of black rear footpeg holders offers the same function and quality as the original part in matte black anodized finish. Functionality, durability, and weather resistance like the original part. Matte black matches well with other accessories in the same color (for example, luggage racks). Set includes footpeg holders for both sides.

Footpeg Lowering Kit for R1200GS LC 2013, R1200GS Adventure LC from 2014 onwards, and R1250GS for the passengerTo individually enhance the seating comfort of your BMW, we have developed this footpeg lowering kit for the R1200GS and R1200GS LC.With our modifications, you can enjoy the legroom that corresponds to your height.The altered footpeg provides a lowering of 40 mm.This allows for a natural ergonomics and a healthier seating position.The advantage of these adapters is that the original footpeg remains intact.Also for the Adventure. The adapters must be installed as shown in the photo. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

EVO Footpeg KitThe original footpeg does not provide a comfortable position? Then the EVO Footpeg Kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotating elements with interlocking teeth allows for 36 adjustment options. The position of the footpeg can be adjusted downwards, forwards, and backwards, as well as in inclination, to meet individual needs.The model-specific joint adapters are simply mounted with the original parts on the footpeg holder. We show how this works in the installation instructions.Easy installation on the original footpeg holder36-fold adjustable via rotating, toothed elements downwards, forwards, and backwards, as well as in inclinationIndividual height adjustment (the highest setting corresponds to the original position, lowering up to a maximum of 15 mm possible)Secure hold through the interlocking of the elements and boltingMarkings facilitate symmetrical adjustment on both sidesProfile with rounded edges protects the sole of the boot while providing extra gripRemovable, metal-reinforced rubber pad with slip-resistant surface structure and large contact area (approx. 8 x 5 cm) for more comfort and gripMade of electropolished, corrosion-resistant stainless steel castingMounting material includedScope of Delivery2 x EVO footpegs2 x model-specific joint adaptersInstallation instructionsMounting materialDetailsMaterial: Stainless steel / RubberColor: Silver / BlackTotal weight: Approx. 1.6 kgApproval NoticeThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried along. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

Foot Brake Lever ExtensionSW-MOTECH manufactures this foot brake lever extension from machined aluminum, designed to fit the original foot brake lever of the BMW R 1200 GS and R 1250 GS.SW-MOTECH produces the extensions from machined, high-strength aluminum alloy with a black anodized surface and a stainless steel footplate. For optimal ergonomic adjustment, the height of the brake lever footrest can be set in two stages of 22 or 27 millimeters.The foot brake lever extension is ideal for off-road riding: it complements the original brake lever footrest and ensures a secure, well-controlled press on the brake. The extension allows for both a widening and an increase in the contact area. This provides more safety and better control of the rear brake.When riding off-road, one often switches between sitting and standing. In a standing position, the knee angle changes, and the foot can exert less pressure on the small pedal. By increasing the contact area, the foot is angled more and can easily reach and control the brake lever even when standing. The height can be adjusted in two different stages.In addition to the height increase, the foot brake lever extension features a widened contact area. This is equipped with a serrated surface, providing better grip on dirty or wet lever surfaces.To complement the original brake lever footrestIncreased and wider contact areaBetter grip thanks to serrated surface – even in wet and dirty conditionsHeight increase of the brake lever footrest by 22 or 27 millimetersDelivery Scope1 x Foot Brake Lever ExtensionInstallation instructionsMounting materialsDetailsMaterial: Aluminum / Stainless SteelSurface: AnodizedColor: Black / SilverTotal Weight: Approx. 0.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any certification marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.

Foot Brake LeverWe have specially manufactured this foot brake lever from high-quality aluminum for the BMW R 1200 / 1250 GS.The adjustable foot brake lever made from high-quality machined aluminum with HART-COAT® coating allows for better operation and modulation of the brake. The SW-MOTECH foot brake lever is adjustable in length by 5 cm, making it suitable for any foot size and riding style. The knurling on the step increases grip and provides improved stability during sporty riding and longer tours. With the separately available Adventure step, you can enhance the handling of the foot brake, especially when off-road riding while standing.Model-specific lever arm made of aluminumRobust and precise: CNC-machined, HART-COAT® coated aluminumBetter ergonomics and safe operation of the foot brake leverHigh-quality machined step for maximum stabilityKnurling increases grip and prevents slippingStep area adjustable in multiple positionsSTREET step included as standardSeparately available Adventure step for off-road toursTÜV certificate and ABE availableScope of Delivery1 x foot brake leverInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: blackTotal weight: approx. 0.1 kgNoteInstallation should definitely be carried out by a professional workshopApproval NoticeThe ABE certificate booklet supplied with the product must always be carried during the ride. This ABE is only valid for the listed models and under consideration of the information in the installation instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspections outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for issuing a necessary foreign certification.

The Touratech levers are made from high-strength aluminum, machined from solid blocks like in aircraft construction. They are 6-way adjustable and foldable. This has the advantage that in the event of a fall, the lever can fold up without breaking. During normal operation, the levers are protected against folding up by a mechanism.The levers can be adjusted in length by 35mm using a dove-tail connection. The anodizing meets the highest quality standards. All screw connections comply with DIN standards and are tightened with a torque wrench before delivery.The CNC levers are delivered with a German ABE (General Operating Permit) and are therefore registration-free.

CNC machined high-tech levers in a short version, approximately 17cm long, making them ideal for the so-called "two-finger brake system." High-strength aluminum (material: T6063 T6), which is also used in aircraft construction, machined from solid, weight only about 250g (on both sides). We use a high-quality anodizing process that is tested for durability and corrosion resistance. The levers are adjustable in six increments in relation to the handlebar using an adjustment lever.

In rainy rides, the rear wheel often splashes dirt and water directly onto your boots and legs. These high-quality, super lightweight plastic parts prevent this effect and also look great. Sold as a set for both sides.