Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

BMW R1200 GS R RS RT LS K50 Sliding Protection for Valve Cover Protection Plastic sliding protection for original BMW stainless steel valve cover protection 1 set = R + L Replacement for the original sliders.

JMP Connector Expansion Rivet compatible with the following vehicles: BMW E82, E88, E60, F07, E63, E64, X5, X6, Z4 for hole circle Ø min. (mm): 7.8for hole circle Ø max. (mm): 8.8 Material: Plastic Color: Black Contents: 10 Packaging unit: 1 Technical Data:Application: Car Vehicle Manufacturer: BMW Type: Expansion Rivets Drilling Diameter: 7.8 mmMaterial: Plastic compatible with: 8.0 mm hole

ELRING Seal Ring Inner Diameter [mm]: 20 mm Outer Diameter [mm]: 24 mm Thickness [mm]: 1.5 mm Material: Copper Shape: A-Shape DIN/ISO 7603 Technical Data:Range: No Inner Diameter: 20 mmOuter Diameter: 24 mmHeight: 1.5 mmMaterial: Copper Design: A-Shape Gasoline Resistant: Yes Oil Resistant: Yes

EBC Clutch Springs   10% harder than the original springs. Delivered as pre-packaged sets.

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and run-overs high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, tailored to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

Intake Manifold Original Spare Part

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1200GS LC Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet,Abschürfungen Teilenummer: 11128532977

  Magnetic Oil Drain Plug   Original Spare PartTechnical Data:Thread:   M20 x 1.5 Head:   Round head with internal hexagon Color:   Gray For Safety Wire:   No Seal/Washer:   No Magnetic:   Yes

Maintenance kit service set for inspections every 10,000 km or annually on water-cooled BMW R 1200 engines of the R1200 GS R RS RT from 2013 onwards. The kit includes OEM quality replacement parts needed for regular maintenance. The kit consists of Mahle, NGK, and BMW products: 1 x OC-619 oil filter1 x LX-3595 air filter element2 x LMAR8D-J NGK spark plug1 x 07119963340 sealing ring A20X24-AL1 x 33117695219 O-ring 11.2X1.81 x 07119963132 sealing ring A12X16-CU

Maintenance kit service set for inspections every 10,000 km or annually on water-cooled BMW R 1200 engines of the R1200 GS R RS RT from 2013 onwards. The kit includes original BMW spare parts needed for regular maintenance. The kit consists of: 1 x 11427721779 oil filter1 x 13727726799 air filter insert2 x 12128532942 spark plug NGK LMAR8D-J1 x 07119963340 sealing ring A20X24-AL1 x 33117695219 O-ring 11.2X1.81 x 07119963132 sealing ring A12X16-CU

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring CoolerTechnical Data:Range: No Inner Diameter: 17.5 mmOuter Diameter: 21.5 mmHeight: 2 mmMaterial: Rubber Design: round

Dresselhaus O-Rings Diameter: 24.0 mm Thickness: 3.0 mm Material: Perbunan, oil-resistant Packaging type: Blister pack Contents: 25 Technical Data:Range: No Inner diameter: 24 mmOuter diameter: 30 mmHeight: 3 mmMaterial: Rubber Design: round Gasoline resistant: Yes Oil resistant: Yes

O-Ring Set

Water pump cover gasket O-ring set Original spare part

The cylinder head cover protection is made of stainless steel and offers comprehensive protection against scratches and stone impacts. Plastic grinding protection on the outside, replaceable Large rubber buffer on the inside BMW Motorrad logo on the grinding protection Not compatible with engine protection bars or left/right engine protection bars Material: Stainless steel

Water Cooler JMP   >>> Optimal Cooling Performance and Durability <<<   Advantages of JMP: -          Better cooling performance due to special fin technology -          Ideal for engines with high thermal loads -          Hand-welded, polished, and pressure tested -          Can be directly replaced with the OE cooler     When the engine runs, friction and heat are automatically generated. Therefore, the engine must be cooled as effectively as possible to avoid overheating. Water coolers consist of pipes and the fins in between. The coolant flows through these pipes. A continuous airflow cools the liquid and thus prevents the engine from overheating.   Water Cooler Variants: -          Mechanically assembled cooler -          Soldered cooler   Mechanically Assembled Cooler: -          Cost- and energy-saving production -          Round pipes fully inserted through the fins -          Small air gaps between pipes and fins -          Lower heat transfer / cooling performance   Soldered Cooler: -          Pipes and fins are soldered in ovens -          Creation of a metallic bond -          Optimal heat transfer -          Flattened pipes -          Larger cooling surface -          Up to 60% more cooling performance

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts." Scratched valve covers or even holes in them are a thing of the past.Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with original BMW engine protection bars- made of 3mm thick silver anodized aluminum- easy and quick to installDelivery includes:Cylinder protection right + left, mounting materials, installation instructionsTo combine with Touratech crash bars, please order 045-5130!

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS Adventure becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Developed for BMW R1200GS-Adventure 2014 - 2016 with BMW engine protection bar (series), combined with Touratech fairing crash bar extension 045-5165.Set for both sides!Does not fit the special model "Adventure Triple Black".

Cylinder ProtectionSW-MOTECH manufactures this cylinder protection specifically for the BMW R 1200 models. The protectors seamlessly integrate into the design of the motorcycle.For those who love their boxer, they push (hopefully only rarely). To keep it that way, we treat it to an extra portion of protection. These custom-made protective elements blend seamlessly into the design of the BMW and protect the boxer valve covers from stone impacts and falls. The protectors can be easily mounted – with just three screws per side – at existing mounting points. The cylinder protection consists of a laser-cut aluminum substructure and a CNC-milled aluminum grinding pad. Additionally, it features rubber damping on the inside.Set with two protectors for both boxer valve coversCNC-milled, anodized aluminum grinding padsWith integrated rubber dampingEasy installation on the original frameScope of Delivery2 x Cylinder protection, right and left sideInstallation instructionsMounting materialsDetailsMaterial: AluminumColor: blackTotal weight: approx. 0.8 kg

Engine ProtectionAdditional protection for the engine against stone impacts and ground contact: The engine protection made from high-quality aluminum alloy shows its full potential off-road, but also provides street motorcycles with added safety and a unique look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows for easy installation.Underbody protection against stone impacts and collisionsRobust and easy installation at original mounting points, modifications to the motorcycle are not requiredModel-specific development for optimal fitMounting materials includedSturdy design made from high-quality aluminum alloyScope of Delivery1 x Engine ProtectionInstallation instructionsMounting materialsDetailsMaterial: AluminumMaterial thickness: 0.40 cmSurface: powder-coatedColor: blackTotal weight: approx. 3.2 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, expert opinions, or general operating permits. The information in the installation instructions must be observed.