This is a used part being offered Vehicle: R1150RT Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, scratches, paint is peeling BMW part number: 31422345526

These progressive replacement springs are perfectly matched to the original shock absorbers of the BMW R1150GS. The front and rear shock absorbers thus have a better tuning for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1150GS 1999-2013 BMW original shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should be done by a professional workshop.Delivery contents:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us.

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1150GS Adventure. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1150GS Adventure 2002-2005 BMW original shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should be done by a professional workshop.Scope of delivery:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperaturesTechnical Data:Inner Diameter:   35 mmOuter Diameter:   48 mmInstallation Height:   11 mmTotal Height:   11 mmManufacturer:   JMP

The JMP fork seals are manufactured by NOK in Japan. NOK is the leading Japanese supplier of fork seals and supplies many renowned vehicle manufacturers in Japan and Europe, as well as the leading manufacturers of shock absorbers and chassis components in the motorcycle sector.   JMP fork seals are therefore a high-quality replacement for the original part and guarantee a long service life, low friction, and thus improved responsiveness.Technical Data:Inner Diameter:   35 mmOuter Diameter:   48 mmInstallation Height:   11 mmTotal Height:   11 mmManufacturer:   JMP

This is a used part being offered Vehicle: R1100GS Manufacturer: BMW Condition: noticeable signs of wear Description: sold as shown, scratches BMW part number: 31422345526 Fits the following vehicles according to the part number:

This shock absorber has been specifically configured for the Telelever front wheel guidance of the BMW R1150GS. The strengths of the Telelever system* are supported by the fine responsiveness of the Touratech shock absorber. The large adjustment range has allowed us to adapt the front of the motorcycle to the demands of an extreme long-distance journey with long off-road stages and high loads. The separation piston design and finely adjustable damping allow for a more precise adjustment and balance than is possible with the standard components from motorcycle manufacturers. The spring preload can be adjusted with the adjustment tool to adapt the balance of your motorcycle - depending on the type of rear shock used. The damping adjustment of this Level1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the front of the BMW R1150GS.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for nearly all possible loading conditions of the motorcycle front.=> Only with significantly higher weight at the front (modifications / conversions) is a higher spring rate sensible.=> In all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The possible components for the rear of the BMW R1150GS* are here:=> Touratech Suspension shock absorber *rear* for BMW R1150GS 2000 to 2003 Type *Level1* 01-040-5862-0=> Replacing only one component will not achieve optimal handling.The configured Level1 shock absorber with its adjustment options is very well suited for this motorcycle type. The suspension only needs to be adjusted once for the entire suspension setup. With a full/empty tank or tank bag, no adjustments are necessary on the go due to the interaction of the shock absorber with the BMW Telelever. Features of the Touratech Suspension Level1 shock absorber:=> The shock absorber housing is made of aluminum.*** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye.*** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.=> The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design: This allows the damping fluids oil and nitrogen to act separately.*** This results in a finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, off-road). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> This shock absorber can also be installed in the limited installation space of the BMW R1150GS front.=> QR code on the shock absorber with individual shock absorber information*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect setting. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

Touratech Suspension E1 Mono Shock Absorber for BMW R 1150 GS - The E1 product line from Touratech Suspension represents the entry into the world of suspension tuning. As a replacement for the original components, the high-quality spring elements guarantee outstanding suspension performance. E1 shock absorbers are individually configured for the corresponding motorcycle after extensive riding tests. This means that high-speed stability is improved, and load changes during sporty cornering are minimized. The large adjustment range allows for perfect tuning of balance and damping for various applications, from sporty rides to leisurely weekend tours to vacation trips. Whether on the highway or the smallest country road, with a passenger or solo – E1 shock absorbers provide a completely new experience of driving dynamics, safety, and precision. The Facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Adjustable spring preload - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, white coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - With ABE Scope of delivery: - Ready-to-install Touratech Suspension E1 shock absorber - Adjustment tool - ABE documents (online) - Installation instructions We recommend having the installation and removal of the shock absorber done by a professional workshop. Tip: Only a suspension upgrade of both the rear and front of the motorcycle achieves optimal driving dynamics and safety. Do you have further questions? We are happy to advise you personally, please contact us. E-Mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Lowering Replacement Springs by -30mm for BMW R 1150 GS 1999 - 2003 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.