Attention - ABE in preparation! The set includes the tank and the two side fairing parts. The tank is made of 100% carbon and completely replaces the original part. It has a volume of approximately 26 liters. The additional weight from the extra tank volume when full is compensated by a weight saving of 3 kg in the kit itself. And if you're not going on a long journey, you save valuable kilos at the highest point of the motorcycle. The tank can only be installed with the carbon side parts included in the set. These also save valuable kilos and look great! Not only technically, but also visually, it can utilize its full potential. To achieve a particularly harmonious overall appearance, the fiber layers are laid and aligned by experts into the mold. This allows the carbon part to fit perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in several stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, only a fraction of its weight. These properties are particularly pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, provides an unprecedented and unique depth effect that highlights the high quality of the material. The facts: - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly The installation of the tank can only be carried out by a professional workshop.

The fender of the 2023 M1000RR is much more than just a fender. It elegantly combines the function of three components into one. The integrated air channels continuously direct fresh air to the brake calipers while riding, reducing the risk of brake fading. Tested under the toughest conditions, it contributes to success in various racing series around the world. For instance, it helped the Tecmas Stock Team achieve a commanding victory at the legendary 24 Hours of Le Mans. But not only on the racetrack, the fender also looks great on the road. To ensure that not only the new M models benefit from the additional cooling, we sought a way to make the fender compatible with other models as well. Therefore, the ABE (General Operating Permit) includes not only the new BMW M1000RR but also all current inline-four models from BMW. To take even more advantage of the aerodynamic advancements at the front wheel, the rear tab prepares for the additional installation of wheel covers. By extending the side surfaces backward, not only is air resistance reduced while riding, but the sensitive fork tubes are also reliably protected from stone chips for the first time. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, impresses not only with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of it. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is enjoyable, we use only the original mounting points for this part. The facts: - with ABE – no additional registration required - improved cooling performance for the brakes - better protection for the fork tubes - sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - additional glossy clear coat on all visible surfaces - optimally protected against UV light - delivered in ready-to-install condition - TÜV certified quality - made from prepreg material produced specifically for Ilmberger - manufactured in-house according to ISO 9001 - installation using the original mounting points

Right next to the 6.5" TFT display, the cockpit cover is always perfectly in view. The fiber layers designed by experts fit seamlessly into the surrounding shapes of the motorcycle, creating a particularly harmonious overall appearance. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of that. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is a pleasure, we use only the original mounting points for this part.   The Facts: - With General Operating Permit (ABE) - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly     

Right next to the 6.5" TFT display, the cockpit cover is always perfectly in view. The fiber layers designed by experts fit seamlessly into the surrounding shapes of the motorcycle, creating a particularly harmonious overall appearance. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of that. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is a pleasure, we use only the original mounting points for this part. The Facts: - With General Operating Permit (ABE) - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly