Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system with numerous carbon components. Race-tested materials.The exhaust system is compatible with BMW side cases.The EU/ECE type approval certificate does not apply to the M 1000 XR model and the S 1000 XR model year 2024.This system does not fit the M 1000 XR model year 2024.

With the Akrapovič Slip-On Line exhaust system for the BMW S 1000 XR, you take the first step into tuning – and you do so with an excellent price-performance ratio. The Slip-On Line enhances the bike: it provides additional power, reduces weight, improves performance, and gives the machine the unmistakable Akrapovič sound. The newly designed silencer seamlessly integrates with the bike's lines. The result is a beautifully crafted system that attracts attention. The silencer casing is made of titanium, and the system is completed with a heat shield and an end cap made of carbon. All components have been developed with the race-proven technologies of Akrapovič.The exhaust system is compatible with BMW side cases.

JMP Retaining Plate corresponds to the OE retaining plate.

Advantages of JT Racing Sprockets - Reduced weight due to the lightening holes- Made from high-quality Chromoly SCM420 steel for maximum durability- Perfectly suited for the sport-oriented motorcyclistTechnical Data:Pitch:   525 Mounting:   Fine-toothed Inner diameter min.:   26 mmInner diameter max.:   30 mmInternal teeth (number of teeth):   13 Number of holes:   without hole Width:   15 mmDesign:   Weight optimized    Racing Manufacturer:   JT Number of teeth:   14

Attention - ABE in preparation! The set includes the tank and the two side fairing parts. The tank is made of 100% carbon and completely replaces the original part. It has a volume of approximately 26 liters. The additional weight from the extra tank volume when full is compensated by a weight saving of 3 kg in the kit itself. And if you're not going on a long journey, you save valuable kilos at the highest point of the motorcycle. The tank can only be installed with the carbon side parts included in the set. These also save valuable kilos and look great! Not only technically, but also visually, it can utilize its full potential. To achieve a particularly harmonious overall appearance, the fiber layers are laid and aligned by experts into the mold. This allows the carbon part to fit perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in several stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, only a fraction of its weight. These properties are particularly pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, provides an unprecedented and unique depth effect that highlights the high quality of the material. The facts: - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly The installation of the tank can only be carried out by a professional workshop.

The fender of the 2023 M1000RR is much more than just a fender. It elegantly combines the function of three components into one. The integrated air channels continuously direct fresh air to the brake calipers while riding, reducing the risk of brake fading. Tested under the toughest conditions, it contributes to success in various racing series around the world. For instance, it helped the Tecmas Stock Team achieve a commanding victory at the legendary 24 Hours of Le Mans. But not only on the racetrack, the fender also looks great on the road. To ensure that not only the new M models benefit from the additional cooling, we sought a way to make the fender compatible with other models as well. Therefore, the ABE (General Operating Permit) includes not only the new BMW M1000RR but also all current inline-four models from BMW. To take even more advantage of the aerodynamic advancements at the front wheel, the rear tab prepares for the additional installation of wheel covers. By extending the side surfaces backward, not only is air resistance reduced while riding, but the sensitive fork tubes are also reliably protected from stone chips for the first time. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, impresses not only with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of it. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is enjoyable, we use only the original mounting points for this part. The facts: - with ABE – no additional registration required - improved cooling performance for the brakes - better protection for the fork tubes - sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - additional glossy clear coat on all visible surfaces - optimally protected against UV light - delivered in ready-to-install condition - TÜV certified quality - made from prepreg material produced specifically for Ilmberger - manufactured in-house according to ISO 9001 - installation using the original mounting points

Right next to the 6.5" TFT display, the cockpit cover is always perfectly in view. The fiber layers designed by experts fit seamlessly into the surrounding shapes of the motorcycle, creating a particularly harmonious overall appearance. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of that. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is a pleasure, we use only the original mounting points for this part.   The Facts: - With General Operating Permit (ABE) - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly     

Right next to the 6.5" TFT display, the cockpit cover is always perfectly in view. The fiber layers designed by experts fit seamlessly into the surrounding shapes of the motorcycle, creating a particularly harmonious overall appearance. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of that. These properties are especially pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, creates an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is a pleasure, we use only the original mounting points for this part. The Facts: - With General Operating Permit (ABE) - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly

The JT Sprockets manufacturing facility is today the largest and most modern production site for sprockets and chainwheels worldwide, equipped among other things with the latest generation of CNC manufacturing machines. JT Sprockets produces the entire range of sprockets and chainwheels for the aftermarket and original equipment.   Every sprocket and chainwheel goes through 25 production stages and is subjected to more than ten individual quality checks to successfully leave the production line.   JT Sprockets manufactures in the right way: through turning, milling, and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best tooth profile. After the subsequent heat treatment, each item is manually inspected - thus, JT Sprockets sets new quality standards in the motorcycle industry.Technical Data:Pitch:   525 Mounting:   Fine-toothed Inner diameter min.:   26 mmInner diameter max.:   30 mmInternal gearing (number of teeth):   13 Number of holes:   without hole Width:   15 mmDesign:   rubberized Manufacturer:   JT Number of teeth:   17

BMW Motorrad Batterieladegerät Plus Das Batterieladegerät Plus ist ideal für konventionelle, wartungsfreie Akkus wie Gel-, Lithium-Ionen und AGM-Batterien geeignet. Es bietet eine prozessorgesteuerte Ladung und Ladeerhaltung und kann bequem über die Motorradsteckdose oder ein Adapterkabel genutzt werden. Dank integriertem Kurzschluss-, Verpolungs- und Überlastungsschutz ist ein sicherer Betrieb gewährleistet. Die kompakten Abmessungen (L x B x H) von 135 x 120 x 50 mm machen es einfach zu transportieren und verstauen.Wie auch schon beim Vorgänger ist dieses Ladegerät natürlich CAN-Bus fähig. D.h. der Zugang über die Bordsteckdose bleibt erhalten, auch wenn die Zündung komplett ausgeschaltet ist.Die Fahrzeugbatterie in Eurem BMW Motorrad wird es Euch danken! Was gibt es nervigeres als im Frühjahr wegen eine platten Batterie nicht starten zu können. Ihr braucht nur eine 220V Steckdose. Dann über di Bordsteckdose oder direkt an der Batterie anklemmen und vergessen! Fertig! Den Rest regelt das Ladegerät!

Stock / Wheel Bearing Original Spare Part

Advantages of JT Racing Sprockets - Reduced weight due to the lightening holes- Made from high-quality Chromoly SCM420 steel for maximum durability- Perfectly suited for the sport-oriented motorcyclistTechnical Data:Pitch:   525 Mounting:   Fine-toothed Inner diameter min.:   26 mmInner diameter max.:   30 mmInternal teeth (number of teeth):   13 Number of holes:   without hole Width:   15 mmDesign:   Weight optimized    Racing Manufacturer:   JT Number of teeth:   15

Advantages of JT Racing Sprockets - Reduced weight due to the lightening holes- Made from high-quality Chromoly SCM420 steel for maximum durability- Perfectly suited for the sport-oriented motorcyclistTechnical Data:Pitch:   525 Mounting:   Fine-toothed Inner diameter min.:   26 mmInner diameter max.:   30 mmInternal teeth (number of teeth):   13 Number of holes:   without hole Width:   15 mmDesign:   Weight optimized    Racing Manufacturer:   JT Number of teeth:   16

Advantages of JT Racing Sprockets - Reduced weight due to the lightening holes- Made from high-quality Chromoly SCM420 steel for maximum durability- Perfectly suited for the sport-oriented motorcyclistTechnical Data:Pitch:   525 Mounting:   Fine-toothed Inner diameter min.:   26 mmInner diameter max.:   30 mmInternal teeth (number of teeth):   13 Number of holes:   without hole Width:   15 mmDesign:   Weight optimized    Racing Manufacturer:   JT Number of teeth:   17