Fork Retaining Ring Original Spare Part

ARI Fork Seal Set   The quality of their execution is matched by the unique nature of the material used (XNBR).   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures     ARI fork seals meet OE quality in both quality and dimensions. This results in the best possible sealing under all road and climate conditions. The fork seals are suitable for daily use, in motorsport, or even in classic vehicles.Technical Data:Inner Diameter:   45 mmOuter Diameter:   58 mmInstallation Height:   11 mmTotal Height:   11 mmManufacturer:   ARI

Puig Touring Windshield 1 This universal windshield fits well on cruisers and choppers with its round headlight cutout. It provides good protection against wind and weather. The head and upper body are relieved from wind pressure, allowing for relaxed riding even on long tours. The mount is included in the delivery. Made from impact-resistant 3mm thick acrylic and available only in transparent. An installation guide and required mounts are included.Technical Data:Height: 530 mmWidth: 540 mmColor: transparent Manufacturer: Puig

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6004 Inner diameter:   20.00 mmOuter diameter:   42.00 mmWidth:   12.00 mmSealing:   2 sealing discs Bearing clearance:   Increased bearing clearance (C3)

All Balls Racing Bearing Kit - High-speed bearings of ABEC 3 tolerance class- Specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean- Bearing grease with rust protection and antioxidants for a temperature range between -29°C and 177°C

The JT Sprockets manufacturing facility is today the largest and most modern production site for sprockets and chainwheels worldwide, equipped among other things with the latest generation of CNC manufacturing machines.JT Sprockets produces the entire range of sprockets and chainwheels for the aftermarket and original equipment. Each sprocket and chainwheel goes through 25 production stages and is subjected to more than ten individual quality checks to successfully leave the production line. JT Sprockets manufactures in the right way: through turning, milling, and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best tooth profile.After the subsequent heat treatment, each item is manually inspected - thus, JT Sprockets sets new quality standards in the motorcycle industry.Technical Data:Pitch: 520 Inner Diameter: 136 mmBolt Circle: 154 mmDrilling: 8.5 mmNumber of Holes: 6 Screw Type: Flat Head Number of Teeth: 47 Sprocket Type: Steel Manufacturer: JT

The ZF Dual sprockets are among the highest quality and most technologically advanced sprockets in the world. The secret lies in the combination of the durability of steel and the lightweight nature of duralumin. This aluminum alloy is characterized by enormous strength and density as well as low weight. The tensile strength is about 11 times that of pure aluminum.Through hardening, duralumin achieves almost the strength of steel. As a result, a lower weight and higher durability have been achieved. Milled grooves in the base of the sprocket ensure optimal self-cleaning.These grooves prevent dirt from accumulating between the teeth, thereby reducing wear on the chain and sprocket. The durability of the ZF Dual sprockets is approximately three times longer than that of pure aluminum sprockets and they are 50% lighter than steel sprockets. Perfectly suitable for both road and off-road use.Technical Data:Pitch: 520 Inner Diameter: 136 mmBolt Circle: 154 mmDrilling: 8.5 mmNumber of Holes: 6 Screw Type: Flat Head Number of Teeth: 47 Sprocket Type: Dual Color: gold Manufacturer: ZF

Accossato Cast Lever   The cast levers from Accossato match the original part in form and function.   Accossato is an Italian brand known from the Superbike, Moto 2, Moto 3, and AMA championships. Spare parts from this brand are correspondingly high quality. Many renowned manufacturers have their products made by Accossato.   The brand has, for example, a 20-year collaboration with Aprilia.

JMP Lever Forged   Forged levers from JMP are made from high-quality aluminum alloy 6061-T6. The high material density makes the levers more elastic and thus more break-resistant than conventional replacement levers produced by injection molding.  

JMP mirrors correspond in shape and function to the original part.They offer a very good price-performance ratio and a clean finish.The mirror glass has a reducing effect.

  Needle Sleeve   Original Spare Part

All Balls Racing Wheel Bearing Kit   - High-speed bearings of ABEC 3 tolerance class - Specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean - Bearing grease with rust protection and antioxidants for a temperature range between -29°C and 177°C    

DID is the original equipment manufacturer for many Japanese and European brands. Leading racing teams in road and off-road sports rely on DID technology.   DID 520VX3: The development of the successor to the proven 520VX2 is also based on DID's long-standing experience in MotoGP and meets the highest demands through the use of patented X-rings.   - longer lifespan and lower friction due to patented X-rings - with direct power transmission technology, the rider experiences incredible acceleration resonance when opening the throttle  This is due to state-of-the-art technology that increases chain strength.Technical Data:Pitch:   520 Length:   112 linksSeal:   X-Ring Manufacturer:   DID Type:   VX3 Design:   open Tensile Strength(kg):   3720 kgOuter Link Color:   gold Inner Link Color:   black Run Index:   3500 Standard Lock:   Hollow Rivet Lock Meter Goods:   748.03.73 Compatible Clip Lock:   748.03.74 Compatible Solid Rivet Lock:   748.03.75 Compatible Hollow Rivet Lock:   748.03.76

DID is the original equipment manufacturer for many Japanese and European brands. Leading racing teams in road and off-road sports rely on DID technology.   DID 520VX3: The development of the successor to the proven 520VX2 is also based on DID's long-standing experience in MotoGP and meets the highest demands through the use of patented X-rings.   - longer lifespan and lower friction due to patented X-rings - with direct power transmission technology, the rider experiences incredible acceleration resonance when opening the throttle  This is due to state-of-the-art technology that increases chain strength.Technical Data:Pitch:   520 Length:   112 linksSeal:   X-Ring Manufacturer:   DID Type:   VX3 Design:   open Tensile Strength(kg):   3720 kgOuter Plate Color:   silver Inner Plate Color:   silver Run Index:   3500 Standard Lock:   Hollow Rivet Lock Meter Goods:   748.04.82 Compatible Clip Lock:   748.04.79 Compatible Solid Rivet Lock:   748.04.80 Compatible Hollow Rivet Lock:   748.04.81

DID is the original equipment manufacturer for many Japanese and European brands. Leading racing teams in road and off-road sports rely on DID technology.   DID VR46 Edition: The development of the VR46 is based on DID's long-standing experience in MotoGP and meets the highest demands through the use of patented X-rings.   - longer lifespan and lower friction due to patented X-rings - with direct power transfer technology, the rider experiences incredible acceleration resonance when opening the throttle  This is due to state-of-the-art technology that increases chain strength.Technical Data:Pitch:   520 Length:   112 linksSeal:   X-Ring Manufacturer:   DID Type:   VR46 Design:   open Tensile Strength(kg):   3720 kgOuter Plate Color:   silver Inner Plate Color:   gold Run Index:   3500 Standard Link:   Hollow Rivet Link Compatible Hollow Rivet Link:   748.04.93

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

Electronic Scottoiler Chain Lubrication System   The e-System V3.1 is an automatic chain lubrication device with precise electronic control. It is quick to install and easy to use. The cables are connected to the positive and negative terminals of the battery and the REP (reservoir with pump unit), and the device is fixed to the motorcycle. Then you are ready to go.   The new display of version 3.1 is intuitive to operate and offers a variety of settings and information. It shows, among other things:   - the outside temperature - the oil drip rate - the oil level in the reservoir (also programmable with an additional reservoir)   The integrated electronics in the e-System come from Moto GP technology, where a triaxial accelerometer registers the movement of the motorcycle. Additionally, the system detects whether the motorcycle's engine is running. The system only activates when both conditions are met.   The chain is lubricated only while riding. With a standby power consumption of less than 200 mA, battery discharge is not an issue. The REP oil reservoir has a capacity of 60 ml of Scottoil and is sufficient for a riding distance of up to 1530 km. It is no larger than the well-known RMV container of the universal kit. The eSystem operates independently of temperature and can be adjusted with the push of a button even while riding. Of course, the Scottoiler e-System is compatible with the Scottoiler Dual Injector and additional reservoirs.The e-System is delivered with a bottle of green biodegradable Scottoil for the entire temperature range of 0 - 40°C.    

DID Timing Chain   - Made in Japan - Chain pins made from carburizing vanadium   The chain pins of these DID timing chains are hardened through a special surface treatment and allow for a lifespan up to three times longer than conventional timing chains   - PLEASE DO NOT USE NON-BRAND LOCKS, ONLY USE THE TIMING CHAIN LOCK FOR THE RESPECTIVE BRAND!   Installation: Simply open the old timing chain and connect it with the new timing chain, pull it through, and then rivet the new timing chain. This saves you several hours of labor, as the engine does not need to be completely disassembled.

The Scottoiler Micro V Essentials Kit includes all the necessary mounting components.The special feature is the small tank with a capacity of only 35ml, which allows for installation on very small vehicles or under tight fairing parts.This amount of oil enables efficient chain lubrication for approximately 1,200km.To allow the customer to choose the right oil for them, this kit is delivered without oil.

RK is the leading manufacturer of drive chains for motorcycles in Japan.For over 40 years, RK has supplied all major Japanese motorcycle manufacturers with original equipment.RK is also the first choice for many teams in MotoGP, motocross, and the Paris-Dakar Rally.   RK XRE: The XRE chain is an evolution of the XSO series. Thanks to the special shape of the XW rings, the chain is sealed at six points, preventing the loss of lubricant under all conditions.   - XW-ring chain- six sealing points, two stabilizers prevent the rings from twisting- loss of lubricant is avoided- 50% longer lifespan than O-ring chainsTechnical Data:Pitch:   520 Length:   112 linksSeal Ring:   XW-ring Manufacturer:   RK Type:   XRE Design:   open Tensile Strength(kg):   3650 kgOuter Link Color:   steel color Inner Link Color:   steel color Standard Lock:   Hollow Rivet Lock Meter Goods:   725.11.21 Compatible Clip Lock:   725.11.23 Compatible Solid Rivet Lock:   725.11.25 Compatible Hollow Rivet Lock:   725.11.24

RK is the leading manufacturer of drive chains for motorcycles in Japan.For over 40 years, RK has supplied all major Japanese motorcycle manufacturers with original equipment.RK is also the first choice for many teams in MotoGP, motocross, and the Paris-Dakar Rally.   RK XRE: The XRE chain is an evolution of the XSO series. Thanks to the special shape of the XW rings, the chain is sealed at six points, preventing the loss of lubricant under all conditions.   - XW-ring chain- six sealing points, two stabilizers prevent the rings from twisting- loss of lubricant is avoided- 50% longer lifespan than O-ring chainsTechnical Data:Pitch:   520 Length:   112 linksSeal:   XW-ring Manufacturer:   RK Type:   XRE Design:   open Tensile Strength(kg):   3650 kgColor of Outer Link:   gold Color of Inner Link:   gold Standard Lock:   Hollow Rivet Lock Meter Goods:   725.11.22 Compatible Clip Lock:   725.11.29 Compatible Solid Rivet Lock:   725.11.31 Compatible Hollow Rivet Lock:   725.11.30

RK is the leading manufacturer of drive chains for motorcycles in Japan.For over 40 years, RK has supplied all major Japanese motorcycle manufacturers with original equipment.RK is also the first choice for many teams in MotoGP, motocross, and the Paris-Dakar Rally.   RK XRE: The XRE chain is an evolution of the XSO series. Thanks to the special shape of the XW rings, the chain is sealed at six points, preventing the loss of lubricant under all conditions.   - XW-ring chain- six sealing points, two stabilizers prevent the rings from twisting- loss of lubricant is avoided- 50% longer lifespan than O-ring chainsTechnical Data:Pitch:   520 Length:   112 linksSeal Ring:   XW-ring Manufacturer:   RK Type:   XRE Design:   open Tensile Strength(kg):   3650 kgColor of Outer Link:   green Color of Inner Link:   steel-colored Standard Link:   Hollow Rivet Link Compatible Hollow Rivet Link:   725.11.32

RK is the leading manufacturer of drive chains for motorcycles in Japan.For over 40 years, RK has supplied all major Japanese motorcycle manufacturers with original equipment.RK is also the first choice for many teams in MotoGP, motocross, and the Paris-Dakar Rally.   RK XRE: The XRE chain is an evolution of the XSO series. Thanks to the special shape of the XW rings, the chain is sealed at six points, preventing the loss of lubricant under all conditions.   - XW-ring chain- six sealing points, two stabilizers prevent the rings from twisting- loss of lubricant is avoided- 50% longer lifespan than O-ring chainsTechnical Data:Pitch:   520 Length:   112 linksSeal Ring:   XW-ring Manufacturer:   RK Type:   XRE Design:   open Tensile Strength(kg):   3650 kgColor of Outer Link:   orange Color of Inner Link:   steel-colored Standard Lock:   Hollow Rivet Lock Compatible Hollow Rivet Lock:   725.11.28

RK is the leading manufacturer of drive chains for motorcycles in Japan.For over 40 years, RK has supplied all major Japanese motorcycle manufacturers with original equipment.RK is also the first choice for many teams in MotoGP, motocross, and the Paris-Dakar Rally.   RK XRE: The XRE chain is an evolution of the XSO series. Thanks to the special shape of the XW rings, the chain is sealed at six points, preventing the loss of lubricant under all conditions.   - XW-ring chain- six sealing points, two stabilizers prevent the rings from twisting- loss of lubricant is avoided- 50% longer lifespan than O-ring chainsTechnical Data:Pitch:   520 Length:   112 linksSeal Ring:   XW-ring Manufacturer:   RK Type:   XRE Design:   open Tensile Strength(kg):   3650 kgColor of Outer Link:   red Color of Inner Link:   steel-colored Standard Lock:   Hollow Rivet Lock Compatible Hollow Rivet Lock:   725.11.33