This factory tool is required for removing the fork springs for the BMW G310GS. - Tool HP-T65 (1021-01-300-5844-0) to separate the cap from the inner tube. - Please observe assembly information for the suspension components. Do you have any further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1405

JMP Fork Reflector Oval   Color: yellow Curved back for mounting on the fork tube with self-adhesive film   Dimensions: 99x27 mm   E-approved            Technical Data:Shape:   oval Color:   yellow Mounting:   self-adhesive Height:   96 mmWidth:   24 mmSpecial Feature:   curved for example for fork tube

The Touratech Suspension Lowering Kit consists of fork springs and a matching set of rocker arms. The set includes replacement fork springs and the rocker arms for the shock absorber. This achieves the best possible lowering of -35mm while maintaining consistently good riding characteristics for the BMW G310GS. The suspension still offers good responsiveness and high safety in critical situations even after the modification. The balance of your motorcycle remains fully intact.   Info: Fits only for *BMW G310GS (2017-2022)*   Info: The side stand and main stand may need to be adjusted in length.   Scope of delivery: - Fork springs -35mm. - Rocker arms for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the modification carried out by a professional workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These progressive fork springs are perfectly tailored to the requirements of the fork for the BMW G310GS. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for “BMW G310GS (2017 – 2022)“   For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the BMW G310GS in our accessory recommendations. Replacing only one component will not achieve optimal handling.   Our recommendation: Have the conversion carried out by a professional workshop. Installation Note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Scope of delivery: - Replacement spring for the original fork. - Suitable fork oil. - Paste to improve the sliding properties of the inner tubes. - Including detailed installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the BMW G310GS. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for “BMW G310GS (2017-2022)“   Scope of delivery: - Fork springs. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the conversion carried out by a specialist workshop. Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Cone Roller Bearing Set for Steering Head with Dust Seals          Technical Data:Type:   Cone Roller Bearing Manufacturer:   JMT Outer Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mmOuter Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mm

Tapered Roller Bearing Set for Steering Head Tourmax   Made in JapanTechnical Specifications:Type:   Tapered Roller Bearing Manufacturer:   Tourmax Outer Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mmOuter Diameter:   55 mmInner Diameter:   30 mmHeight:   17 mm

Crash Pad Kit for Front AxleThe crash pads for the front axle made of abrasion-resistant plastic protect the fork from damage in the event of a fall. With a fiberglass content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished red bull logo adds a visual highlight to your motorcycle.Protection of the forkDiscreet sliding pad made of abrasion-resistant polyamideRobust core made of fiberglass-reinforced plastic (PA6 GF30)High mechanical damping capacity due to TPU coatingGood sliding and emergency running propertiesMatte black surface with polished red bull logoEasy installation with axle thread and model-specific spacersScope of Delivery2 x Crash Pad Kit for Front AxleInstallation instructionsMounting materialsDetailsMaterial: PA6 ErtalonColor: blackTotal weight: approx. 0.6 kgApproval NoticeThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

A lowering kit with fork springs and an E1 shock absorber from Touratech Suspension provides a sensible lowering of -50mm without compromising riding characteristics. Of course, some ground clearance is lost. The suspension components are perfectly tuned to the BMW G310 and offer significantly improved responsiveness and higher safety in critical situations compared to the original spring elements.   Info: Fits only for “BMW G310 2017-2023”   The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Spring preload adjustable - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - Fork springs with continuous progression - With ABE   Delivery includes: - Fork springs -50mm - Suitable fork oil. - Paste to improve the sliding properties of the fork tubes. - Ready-to-install E1 shock absorber -50mm - Adjustment tool - Including detailed installation instructions. - Installation instructions with setup information,   Our recommendation: Have the conversion carried out by a professional workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.